S1657 with control system With Clean In Place with an Ra0.8 finish. Variable discharge system with water cooled jacket Maximum feed density 1100 kg/m3, maximum sediment density 1400 kg/m3. Feed temperature 0-100 degrees C. With NEMA style Stainless steel control panel with Allen Bradly Panel View Plus HMI and Powerflex 753- VFD for drive motor. With solids receiving screw pump, manufactured by Netzsch Screw Press. Type NEMO-model NM053BY02512B, Rated for 3-5 m3/H, 6-8 bar, with a 4kw drive. Motor Horsepower: 37 kW (49.6 HP). Inlet Diameter: 220 mm (8.7 in). Bowl Volume: 66 L (17.4 gallons). Clean In Place: Yes. Controls: Yes. RPM Maximum: 4,800.
20" diameter self cleaning disc stacks intermittent discharge 3300 gph feed capacity Motor Horsepower: 14.9 kW (20 HP). Bowl Diameter: 508 mm (20 in). Inlet Diameter: 44.5 mm (1.75 in). RPM Maximum: 6,500.
S1657 with control system With Clean In Place with an Ra0.8 finish Variable discharge system with water cooled jacket Maximum feed density 1100 kg/m3, maximum sediment density 1400 kg/m3. Feed temperature 0-100 degrees C. With NEMA style Stainless steel control panel with Allen Bradly Panel View Plus HMI and Powerflex 753- VFD for drive motor With solids receiving screw pump, manufactured by Netzsch Screw Press. Type NEMO-model NM053BY02512B, Rated for 3-5 m3/H, 6-8 bar, with a 4kw drive. Motor Horsepower: 37 kW (49.6 HP). Inlet Diameter: 220 mm (8.7 in). Bowl Volume: 66 L (17.4 gallons). Clean In Place: Yes. Controls: Yes. RPM Maximum: 4,800.
solid disc bowl centrifuge. Separator design (3 phase) w/paring discs on light and heavy phases Motor Horsepower: 5.6 kW (7.5 HP). Number of Phases: 3.
axial discharge disc centrifuge Hermetic, air operated solids ejection, clarified liquid discharged under pressure by means of paring disc. Caulk thickness 0.4mm. Tools and manual Motor Horsepower: 29.8 kW (40 HP). Clarifier: 2. Number of Phases: 2.
disc bowl Clarifier (2-phase) centrifuge with paring disc discharge of liquid phase Rising channels on outside edge of disc's (Scalloped disc's) Frame assembly serial #1624-930. Bowl assembly serial #16290-520 220/440 volt UL label. Motor Horsepower: 11.2 kW (15 HP). Number of Phases: 2. RPM Maximum: 6,500.
disk bowl hermetic centrifuge 3/50/220/380 volt Motor Horsepower: 35.8 kW (48 HP). Clean In Place: Yes. RPM Maximum: 4,500.
disc bowl centrifuge. Separator (3-phase) design. Special design for glucose separation Cast iron frame w/brake, oil level sight glass and revolution indicator for bowl speed check Drive by standard flange mount motor. Power transmission to bowl spindle via centrifugal friction clutch and worm gear. All bearings and the gears splash lubricated from a central oil bath. Pressure discharge of the heavy phase via built-in centripetal pump and gravity discharge of the light phase. Motor Horsepower: 7.5 kW (10.1 HP). Number of Phases: 3.
disc nozzle centrifuge Disc stack specs 14 3/8" OD, 1mm caulks, 40 deg angle, (15) discs w/semi-circular rising channels on OD, 1" wide x 1 1/2" deep 3/60/230/460 volt w/fluid clutch Tools, instruction book Motor Horsepower: 37.3 kW (50 HP). RPM Maximum: 6,000.
solid disk bowl centrifuge 316SS covers and bowl 3/60/230/460 volt No feed pump Motor Horsepower: 11.2 kW (15 HP).
Clarifier (two phase) centrifuge with paring disc discharge of liquid phase self cleaning discharge of solids. Gas tight design of neck bearing bridge Rising channels on the outside edge of disc's (scalloped disc's) Rated for specific gravity of 1.0 on heavy phase, and 1.2 specific gravity of separated solids Motor Horsepower: 14.9 kW (20 HP). Number of Phases: 2. RPM Maximum: 6,500.
Disc bowl automatic desludger Purifier/clarifier design (3 phase) Timer triggered total discharge Paring disc on both light and heavy phases Motor Horsepower: 11 kW (14.8 HP). Number of Phases: 3.
solids retaining disc bowl centrifuge Material of bowl is s/steel 2205 Purifier (3-phase) design Paring disc on both light and heavy phase. Motor Horsepower: 11 kW (14.8 HP). Number of Phases: 3. RPM Maximum: 6,500.
3 phase purifier design with light phase by gravity, heavy phase by paring disc Hermetic 230/460 volt motor Motor Horsepower: 7.5 kW (10 HP). Number of Phases: 3. RPM Maximum: 1,800.
3-phase separator design with fixed paring disc on both liquid phases Bronze top disc, pump chamber and locking ring Timer initiated partial discharge (dosing ring) of solids purifier disc stack 5 HP flange mount motor Motor Horsepower: 3.7 kW (5 HP). Controls: Yes. Number of Phases: 3.
3-phase separator design with fixed paring disc on both liquid phases Timer initiated, partial discharge (dosing ring) of solids, purifier disc stack 20 HP flange mount motor Motor Horsepower: 14.9 kW (20 HP). Controls: Yes. Number of Phases: 3.
self cleaning disc separator Clarifier design (liquid/solid separation) rated 1.0 kg/cm2 heavy phase With 120 volt electronic timing, air/water control box feed valve, light and heavy phase discharge valves Motor Horsepower: 35 kW (46.9 HP). Bowl Diameter: 1,092 mm (43 in). Inlet Diameter: 50.8 mm (2 in). Controls: Yes. Number of Phases: 3. RPM Maximum: 4,500.
self cleaning disc separator Clarifier design (liquid/solid separation) rated 1.0 kg/cm2 heavy phase With 120 volt electronic timing, air/water control box, feed valve light and heavy phase discharge valves. Motor Horsepower: 30 kW (40.2 HP). Bowl Diameter: 1,092 mm (43 in). Inlet Diameter: 50.8 mm (2 in). Clarifier: liquid/solid separation. Number of Phases: 3. RPM Maximum: 4,500.
431SS 4-chamber bowl centrifuge Clarifier design w/theoretical capacity of 10,000 liter/hr Reg # 2144021 Motor Horsepower: 10 kW (13.4 HP). Bowl Volume: 65 L (17.2 gallons).
solid disc bowl centrifuge. Separator design (3 phase) w/paring discs on light and heavy phases. Motor Horsepower: 5.6 kW (7.5 HP).
Clarifier (2-phase) Auto desludging disc bowl centrifuge with centripetal pump (paring disc) discharge of the liquid phase Scalloped disc (holes to outside edge of disc's) Self cleaning discharge of the solid phase Rated for 1.1 kg/dm3 of heavy liquid 1.5 kg/dm3 of the solids No motor. Number of Phases: 2. RPM Maximum: 6,400.
329 stainless steel bowl And 316 stainless steel Clarifier centrifuge with intermittent solids discharge Motor Horsepower: 15 kW (20.1 HP).
Type: Automatic desludger centrifuge, Tachometer range: 1100-1500 rpm, Rev counter range: 118-125 rpm, Worm wheel range: 1420-1500 rpm, Openings:
solid disc bowl centrifuge, 2-chamber bowl clarifier centrifuge, Max SG solids: 1.5. Openings: 3-50mm, 1-30mm. Complete with spare parts, tools, etc in separate crate. Motor Horsepower: 15 kW (20.1 HP). Number of Phases: 2. RPM Maximum: 4,650.
2-chamber bowl clarifier centrifuge. Complete with bowl, parts and tools in separate crate. Motor Horsepower: 19 kW (25.5 HP). RPM Maximum: 4,500.
frame with out bowl. Clarifier (2-phase) design IP55 motor Cast iron frame w/brake, oil level sight glass and revolution indicator for bowl speed check. Drive by standard flange mount motor. Power transmitted via centrifugal friction clutch and worm gear to the bowl spindle. All bearings and the gear splash lubricated from central oil bath. Pressure discharge of the clarified liquid by built-in centrifugal pump. Motor Horsepower: 7.5 kW (10.1 HP). Number of Phases: 2. RPM Maximum: 7,570.
Drum speed 3490 U/min 532 mm diameter Design for Sulphuric Acid e-Motor 380-420V / 655-725V/50Hz/36A / 21A/18,5kW 1470 U/min ex proof (CT4) Motor Horsepower: 18.5 kW (24.8 HP). Bowl Diameter: 532 mm (20.9 in). RPM Maximum: 3,490.
clarifing centrifuge with open feed inlet fixed paring disc on light phase motor direct coupled to centrifuge on same base intermitten variable timed ejection of solids Gas tight design Spark proof Motor Horsepower: 10 kW (13.4 HP). Clean In Place: Yes. RPM Maximum: 1,500.
nozzle bowl disc stack centrifuge Clarifier design, with centrifugal pump for liquid discharge Nozzle continuous discharge of solids Horizontal flange type motor with clutch Motor Horsepower: 30 kW (40.2 HP). RPM Maximum: 5,600.
nozzle bowl disc stack centrifuge with centrifugal pump for liquid discharge Nozzle continuous open discharge of solids Horizontal flange type motor with clutch Motor Horsepower: 30 kW (40.2 HP). RPM Maximum: 5,600.
nozzle bowl disc stack centrifuge centrifugal pump for liquid discharge Nozzle continuous open discharge of solids Horizontal flange type motor with clutch Motor Horsepower: 30 kW (40.2 HP). RPM Maximum: 5,600.
Hermetic design. Paring disc discharge of clarified liquid Complete w/controls, tools, spares and manual. Controls: Yes. Number of Phases: 2. RPM Maximum: 1,500.
seperator (clarifier) centrifuge Product # 88185-01-01 max. density of feed 1100 kg/m3 Max. density of sediment, 1238 kg.m3 Max density of operating liquid, 1000 kg/m3 Max operating temp. 100 degrees C Intermittent discharge of sediment Bowl size 10 Complete with motor, inlet & outlet housing, centrifugal pump/pairing disk, water harness, Manuals, inlet/outlet flowmeters and controls Motor Horsepower: 22 kW (29.5 HP). Bowl Diameter: 405 mm (15.9 in). Inlet Diameter: 35.5 mm (1.4 in). Bowl Volume: 16 L (4.2 gallons). Controls: Yes. RPM Maximum: 6,236.
disc bowl recycle double overflow nozzle centrifuge Hydraulic bowl lifter. RPM Maximum: 4,850.
Clarifier (2-phase) design Clarified liquid discharged under pressure by means of paring disc 1420 to 1500 rpm electric motor Tool, controls and manual. Rate Approx. 130 GPM Motor Horsepower: 18.5 kW (24.8 HP). Bowl Volume: 29 L (7.7 gallons). Controls: Yes. Number of Phases: 2. RPM Maximum: 5,120.
disk bowl separator system, solids 1.3 kg.dm3, heavy solid 1 kg/dm3
(1) 450 liter 316Ti stainless steel vertical tank, manufactured by Hinke, fabrik #8784, pressure -0.3/+0.49 bar @ -0/+90 degrees C (450 liter), weld flat top and bottom, mounted on legs, (1) 3.5/5/12 m3/hr @ 51/50/47m head 316 stainless steel centrifugal pump, manufactured by Dickow Pumpen, type NMBh 26/210, fabrik #9716261, 2900 rpm, 4.1/3.3/4.1kw, driven by 2.5kw, 3/50/380/660 volt, 2840 rpm motor mounted on a baseplate
The separator is equipped with a self-cleaning disc-type bowl. The product flows into the bowl through inlet and is separated in disk stack into a light and a heavy liquid phase with simultaneous removal of the solids which collect in the sediment holding space. The light liquid phase flows towards the center and is discharged foam-free and under pressure by centripetal pump through outlet. The heavy liquid phase flows to the periphery and is discharged under pressure by centripetal pump through outlet. The separated gums and solids collect in sediment holding space and are instantaneously ejected through ports at pre-set intervals by lowering the sliding piston. Closing water drains via the bowl valve. The ejection cycles are initiated by a control unit Motor Horsepower: 15 kW (20.1 HP). Bowl Diameter: 790 mm (31.1 in). Inlet Diameter: 40 mm (1.57 in). RPM Maximum: 6,450.
rebuilt disc bowl self cleaning solids 1.25 kg/dm3, heavy solid 1.1 kg/dm3, The product flows into the bowl through inlet and is separated in disk stack into a light and a heavy liquid phase with simultaneous removal of the solids which collect in the sediment holding space. The light liquid phase flows towards the center and is discharged foam-free and under pressure by centrifugal pump through outlet. The heavy liquid phase flows to the periphery and is discharged under pressure by centrifugal pump through outlet. The separated gums and solids collect in sediment holding space and are instantaneously ejected through ports at pre-set intervals by lowering the sliding piston. Closing water drains via the bowl valve. The ejection cycles are initiated by a control unit Motor Horsepower: 15 kW (20.1 HP). Bowl Diameter: 790 mm (31.1 in). Inlet Diameter: 40 mm (1.57 in). RPM Maximum: 6,450.
Motor Horsepower: 55 kW (73.8 HP). Bowl Diameter: 730 mm (28.7 in). Controls: Yes. RPM Maximum: 4,500.
nozzle concentrator W/sludge chute discs w/outer rising channels, (3) sets of nozzles with tungsten carbide nozzle inserts, flow meter and gas tight neck bearing UL label Motor Horsepower: 22.4 kW (30 HP).
316SS bowl and cover 21" OD disk stack Sediment Holding: 4.6 gallons, Rated capacity: 7,926 Gallons per Hour Motor: Driven by a Louis Allis 230/460 volt Explosion proof enclosure Motor Horsepower: 29.8 kW (40 HP). Inlet Diameter: 50.8 mm (2 in). Bowl Volume: 70 L (18.5 gallons). Number of Phases: 2. RPM Maximum: 5,000.
Hermetically sealed 316 SS solid disc bowl centrifuge Motor Horsepower: 7.5 kW (10 HP). RPM Maximum: 7,000.
solid disc bowl 2-chamber clarifier centrifuge. UL label less control. gear driven by motor Motor Horsepower: 2.2 kW (3 HP). Controls: Yes. Number of Phases: 2.
casing, and frame Unit was Clarifier (2-phase) design. Vaportite. Number of Phases: 2.
motor enclosed in SS sanitary housing. Rated 10000-12500 litre/hr milk Hood material of construction 1.4541 (321SS). Ken #34016001, ELN #13352210, Reg #170 Motor Horsepower: 22 kW (29.5 HP). RPM Maximum: 4,800.
431SS (1.4057) self-cleaning disc bowl separator. volt motor enclosed in SS sanitary housing. Rated 10000-12500 litre/hr Hood material of construction 1.4541 (321SS). Ken #340160001, ELN #13352210, Reg #171 Motor Horsepower: 22 kW (29.5 HP). RPM Maximum: 4,800.
431SS 20,000 liter/hr Motor Horsepower: 37 kW (49.6 HP). RPM Maximum: 4,500.
431SS Capacity to 20,000 liter/hr. Motor Horsepower: 35 kW (47 HP). RPM Maximum: 4,500.
4-chamber bowl centrifuge w/theoretical capacity of 10,000 liter/hr Sludge capacity 65 liters Motor Horsepower: 10 kW (13.4 HP). Bowl Volume: 65 L (17.2 gallons).
solid retaining disc bowl extractor (special design) UL label 3-stage Lurgi extractor centrifuge complete w/piping Motor Horsepower: 14.9 kW (20 HP). Number of Phases: 3. RPM Maximum: 3,700.
flameproof motor Openings: 1" x 2" (25mm x 50mm), 2-1" (25mm) With on/off switch and tools Motor Horsepower: 1 kW (1.34 HP). Number of Phases: 2.
solid disc bowl lab centrifuge Separator (3-phase) design Missing bowl Motor Horsepower: 0.37 kW (0.5 HP). Number of Phases: 3.
Hermetic design Less motor
solid disc bowl centrifuge. Separator design (3 phase) w/paring discs on light and heavy phases. Motor Horsepower: 5.6 kW (7.5 HP). Number of Phases: 3.
centrifuge frame, casing, hood, gears, clutch housing
disc bowl automatic desludger parts Motor: 230/460 volt UL label Liquid discharge on paring disc Max solids SG = 2.4, max liquid SG 1.1 Motor Horsepower: 3.7 kW (5 HP). Number of Phases: 2. RPM Maximum: 8,400.
Belt Driven by separately mounted (on common plate) 3/50/220/380 volt motor 316SS covers and bowl insert CS bowl and locking ring. Open feed. Motor Horsepower: 5.6 kW (7.5 HP). Number of Phases: 3. RPM Maximum: 1,250.
2-chamber bowl centrifuge Clarifier (2-phase) design Bowl 533mm dia Motor Horsepower: 11.2 kW (15 HP). Bowl Diameter: 533 mm (21 in). Number of Phases: 2. RPM Maximum: 5,000.
automatic disc bowl centrifuge Paring disc on liquid phase. Compressed air self-triggering ejection Manufacturers #2975272 Solids space 25.7 cu liter. Caulk thickness 0.4, 0.6 or 1.0mm. Max speed 3760-3970 rpm. Motor Horsepower: 37.3 kW (50 HP). Number of Phases: 2. RPM Maximum: 3,970.
nozzle disc centrifuge machine #1671-563 1.2 kg/dm3 solids bowl #3230-6645-010 (563) Driven by Loher EX motor via V-belt assembly with hydraulic powerpak driven by 1.5 KW, 3/50/500 volt motor Stand for cone assembly. Motor Horsepower: 150 kW (201.2 HP). RPM Maximum: 3,080.
solid bowl disc centrifuge. Attached feed and discahrge pump. Sludge volume 1.5 liters. 3-phase separator. Ring dams and tools. Motor Horsepower: 2.2 kW (3 HP). Bowl Volume: 1.5 L (0.4 gallons). Number of Phases: 3. RPM Maximum: 9,200.
Designed for 5 gpm coolant flow rate, 7 gpm for oil. Batch system includes (1) 250 gal dirty coolant tank; (1) 250 gal clean coolant tank; (1) 250 gal dirty oil tank. Clean oil designed to discharge to barrels. System includes Ramoy feed pump basket strainer 8" hydrocyclone for pre-separation (2) 18 KW heaters for pasturization, and all process valves for coolant processing Oil processing includes separate strainer and feed pump. Westfalia manual disc bowl centrifuge Mdl OTA7-00-066 bowl speed. 1.1 Kg/cu dm solids 1.5 liter sludge System includes some centrifuge tools. Skid size 6' x 9'8" wide x 7' tall Motor Horsepower: 2.2 kW (3 HP). Bowl Volume: 1.5 L (0.4 gallons). RPM Maximum: 9,600.
Complete w/controls, tools, manual Motor Horsepower: 44.7 kW (60 HP). Controls: Yes. Number of Phases: 2.
centrifuge motor and housing only, no bowl available. 3-phase separator, light phase discharged under pressure by means of paring disc, heavy phase gravity discharge Motor Horsepower: 14.9 kW (20 HP). Number of Phases: 3.
disc nozzle centrifuge Internal nozzles with paring device Used for 10 yrs for yeast production Tachometer 1420-1500 rpm Motor Horsepower: 44.7 kW (60 HP). RPM Maximum: 1,500.
With internal nozzles and paring device Used for 10 yrs for yeast production. Tachometer 1420-1500 rpm Speed counter 118-125 rpm Driven by 45 KW, 3/50/380 volt, 1470 rpm motor Openings: top 1-2" (50mm), 1-1" (25mm); btm 1-6 1/2" (164mm) Motor Horsepower: 45 kW (60.3 HP). Inlet Diameter: 50 mm (1.97 in). RPM Maximum: 1,500.
disc bowl clarifier (2-phase) centrifuge SS bowl, 316SS housing. Manual and tools. Controls: Yes. Number of Phases: 2.
Frame SN 1647477, bowl SN 1641173 Has tools, controls and manuals. Motor Horsepower: 44.7 kW (60 HP). Controls: Yes. Number of Phases: 2. RPM Maximum: 4,500.
Hermetic design Paring disc discharge of clarified liquid Motor Horsepower: 11 kW (14.8 HP). Number of Phases: 2. RPM Maximum: 1,500.
Hermetic design. Paring disc discharge of clarified liquid. No motor Number of Phases: 2. RPM Maximum: 1,500.
Worm wheel: 1420-1500 rpm; tachometer: 1420-1500 rpm; rev counter: 118-185 rpm Openings: 3-2" (50mm), 1-4" (100mm) Motor Horsepower: 11.2 kW (15 HP). Controls: Yes. RPM Maximum: 1,500.
380/420 volts non-flameproof motor. Shaft speed 1420-1500 rpm tachometer 1420-1500 rpm; revolution counter 118-125 rpm. Openings: 1-3" (75mm), 2-2" (50mm), 2-1 1/2" (37mm), 3-1" (25mm).(Clarifier: 2 phase separation of liquid phase and less than 5% solids). Motor Horsepower: 7.5 kW (10 HP). Clarifier: 2 phase separation of liquid phase and less than 5% solids. Number of Phases: 2. RPM Maximum: 1,500.
disc bowl separator/centrifuge aluminium hinged top cover, Missing bowl. Motor Horsepower: 0.56 kW (0.75 HP). Number of Phases: 3.
220/380 volt Motor Horsepower: 35.8 kW (48 HP). RPM Maximum: 4,500.
Worm gear 1700-1800 rpm TEFC motor thru gyrol fluid drive. Motor Horsepower: 22.4 kW (30 HP).
Worm gear 1700-1800 rpm TEFC motor thru gyrol fluid drive Motor Horsepower: 22.4 kW (30 HP).
Separator (3-phase) design Cast iron frame w/brake, oil level sight glass and revolution indicator for bowl speed check. Drive by standard flange mount motor. Power transmission to bowl spindle via centrifugal friction clutch and worm gear. All bearings and the gears splash lubricated from central oil bath. Pressure discharge of the heavy phase via built-in centripetal pump and gravity discharge of the light phase. Motor Horsepower: 7.5 kW (10.1 HP). Number of Phases: 3. RPM Maximum: 7,500.
laboratory separator disc centrifuge. Speed 3500 - 10000 rpm Throughput 200-600 ltr/hr Openings: liquid/solids outlet 3-1"; feed (process) 1-1/2"; operating liquid 3-1/2" Motor Horsepower: 1.5 kW (2 HP). Inlet Diameter: 12.7 mm (0.5 in). Bowl Volume: 0.35 L (0.09 gallons). Number of Phases: 3. RPM Maximum: 10,000.
chamber disc bowl centrifuge Motor Horsepower: 11 kW (14.8 HP). Number of Phases: 2. RPM Maximum: 4,610.
separator double paring disc 1.1 KW/1.5 KW, 3/50/220/380 volt 1420 rpm motor Tools Motor Horsepower: 1.5 kW (2 HP). RPM Maximum: 10,000.
Rated 50,000 l/hr Motor Horsepower: 45 kW (60.3 HP). Number of Phases: 2. RPM Maximum: 4,500.
solid Disc bowl Lab centrifuge. 3/60/230/460 volt explosion proof motor Motor Horsepower: 0.56 kW (0.75 HP). Number of Phases: 3. RPM Maximum: 11,780.
bowl assembly with centrifugal pump With bowl top lifting tool
Separator 3~/50Hz/380-660Volt @ 1.455rpm Motor Horsepower: 15 kW (20.1 HP).
control panels for Disc centrifuge with timed solids discharge with feed valve, bowl valve, flush valve, partial discharge, partical feed controls. Controls: Yes.
Seperator Sediment Holding: 4.6 gallons, Rated capacity: 7,926 Gallons per Hour Driven by a Motor: 230/460 volt Explosion proof enclosure Motor Horsepower: 29.8 kW (40 HP). Inlet Diameter: 38.1 mm (1.5 in). Bowl Volume: 70 L (18.5 gallons). RPM Maximum: 4,910.
separator disc centrifuge with self-cleaning bowl Light phase liquid discharge by centripetal pump, heavy phase liquid discharge by regulating ring, timed discharge of solids. Can be set up for purification or clarification. Rising channels to the outside edge of disc's (scalloped) 1,0 kg/dm3 heavy phase liquid 1,4 kg/dm3 solids. bowl sludge capacity 4.2 dm3 Driven by a flange mounted motor 50Hz/60Hz, 1455/1745 RPM, 8.5 kW Frame Serial #1663 449. Bowl Serial #1665 441 oil separator plant equipped with controls, pre-strainer, oil pre-heater, water pre-heater, switches, pipe lines. Tools and manual for separator Motor Horsepower: 8.5 kW (11.4 HP). Clarifier: Purifier/Clarifier. Controls: Yes. Number of Phases: 2. RPM Maximum: 7,510.
With tools Motor Horsepower: 18.5 kW (24.8 HP).
manufacturers #881150-02-S-03-SK-02-0259 feed density 1110 kg/cm3 sediment density 1251 kg/cm3 control fluid density 1000 kg/cm3 process temperature 0-100 deg C 438mm diameter bowl Swep 316 s/steel (1.4401) plate heat exchanger, type GC1210, serial #AU021271, pressure both sides 10 bar @ 150 deg C Separator: (1) s/steel separator tank, (1) 0.7 m3/hr Alfa Laval SRU1-005-HD-3A, steel gear pump, serial #582924, 0.58 sqm Swep 316 s/steel (1.4401) plate heat exchanger, type GC1210, serial AU021271 pressure both sides 10 bar @ 150 deg C, (1) 1 m3/hr Sterling Berkefeld water softening system, (1) control panel, Motor Horsepower: 30 kW (40.2 HP). Bowl Diameter: 438 mm (17.2 in). Inlet Diameter: 51 mm (2 in). Controls: Yes. RPM Maximum: 7,432.
pressure 1.5 bar @ 100 degrees C bolted top cover, Motor Horsepower: 30 kW (40.2 HP). RPM Maximum: 6,800.
pressure 1.5 bar @ 100 degrees C, bolted top cover, Motor Horsepower: 22 kW (29.5 HP). RPM Maximum: 6,800.
continuous disc bowl centrifuge Rated 1 bar @ 50 deg C Sanitary construction for food processing Max feed temp 95 deg C Solids density: 1.42 kg/dm3, Heavy liquid density: 1.20 kg/dm3.Max feed temp 95 deg C. Motor also runs at 3/50/380 at 1486 RPM with oil reservoir. With local controls CIP valves and spray ball Solids pump and tank Motor Horsepower: 75 kW (100.6 HP). Bowl Diameter: 1,700 mm (66.9 in). Inlet Diameter: 76.2 mm (3 in). Clean In Place: Yes. Controls: Yes. RPM Maximum: 4,800.
Pharma grade GMP sanitary construction Steam sterilized self cleaning disc stack centrifuge 100-200 l/hr through put Tools are available max flow -/0.15 m3/H minimum/maximum temperature 15/40 degrees C. Drive motor by Loher, type ANGA 13253-04C, serial 2231330 60 Hz 1740 RPM. Motor Horsepower: 5.6 kW (7.5 HP). Bowl Volume: 52 L (13.7 gallons). Controls: Yes. RPM Maximum: 11,970.
Pharma grade GMP sanitary construction Designed for Biotech cell harvesting Rated 5 gpm on Pharma broth with a Broom Motors LTD Also includes a 1 m2 plate and frame heat exchanger manufactured by Sondex, rated for 10 kp/cm2 at 150 degrees C Motor Horsepower: 5.6 kW (7.5 HP). Controls: Yes. RPM Maximum: 9,650.