125 liter bowl capacity,
Bowl type mixer with clamped flat top and pneumatic assist for raising the lid,
lid has a 6" latching inlet and a 2" sanitary quick fitting.
Unit has a 5" sanitary, pneumatic flush valve on side bottom of bowl for discharge.
Sanitary polished finish on both internals and exterior. Unit has a high intensity mixing blade in bottom of the bowl and a high speed chopper through side wall.
Air purge seals on chopper.
Electric connections are plug in, air line is a quick coupling.
Controls are self contained with the unit.
Type: Mixer-Ribbon & Paddle
Manufacturer: Littleford Bros, Inc
Model: FKM-600-D
Condition: Used
Material: Stainless Steel 304
Design Capacity: 0.793 m3 (28 ft3)
Vessel Pressure: -0.965 bar (-14 psi)
Operational mode: Batch. Paddle/Ribbon MOC: Stainless Steel 304. Agitation Shaft Sealing: Packing. Length: 1,219 mm (48 in). Width: 914 mm (36 in). Height: 914 mm (36 in).
Type: Mixer-Ribbon & Paddle
Manufacturer: M.A.P SRL (Italy)
Model: WBHY 6000
Condition: Used
Material: Stainless Steel 316
Design Capacity: 6 m3 (212 ft3)
Operating Capacity: 4 m3 (141 ft3)
ploughshare mixer with (4) side choppers
Job 167
Chamber is 1.5m I.D x 3370mm long
packed glands on shaft
shaft speed 74 rpm
2-speed motor
chopper direct driven by a 2-speed motor, 5.5 kw, 3/50/220/240/380/420 volt, 1450 rpm or 6.4 kw, 3/60/250/280/440/480 volt, 1750 rpm,
openings top: 4-250mm x 250mm with pneumatic slide valves, 1-150mm, side: 2-750mm x 620mm inspection doors, 4-25mm, center bottom: 1-350mm x 250mm with actuated valve
Ribbon Type: Plows. Agitation Shaft Sealing: Packing. Length: 6,980 mm (275 in). Width: 1,600 mm (63 in). Height: 2,020 mm (79.5 in).
Type: Mixer-Ribbon & Paddle
Manufacturer: Babcock & Wilcox
Condition: Used
Material: Stainless Steel 316
Design Capacity: 0.5 m3 (17.7 ft3)
Operating Capacity: 0.272 m3 (9.6 ft3)
paddle mixer
36 rpm. paddle speed.Packed glands.
Unit has bottom discharge with manual valve.
Agitation Shaft Sealing: Packing. Length: 1,219 mm (48 in). Width: 610 mm (24 in). Height: 686 mm (27 in).
Type: Mixer-Ribbon & Paddle
Manufacturer: Babcock & Wilcox
Model: 100L2PGM
Condition: Used
Material: Stainless Steel 316
Design Capacity: 0.1 m3 (3.53 ft3)
Operating Capacity: 0.066 m3 (2.33 ft3)
"L" Series ribbon blender
Features: hinged lid, removable endplate, interrupted ribbon, external bearings, packing glands
220/250/380/440 volt
69.3 rpm
Unit with a built-in on/off switch.
Openings: inlet 18" x 9"; outlet 1-4" with manually operated 'V' Series discharge valve.
Ribbon Type: Interrupted ribbon. Agitation Shaft Sealing: Packing. Length: 2,286 mm (90 in). Width: 1,295 mm (51 in). Height: 1,295 mm (51 in).