Quote Cart
System with Knock out pot and heat exchanger. 25 Gallon 304 SS, receiver by J D. Cousins, rated for FV 75 psi at 350 degrees F. 30 Gallon condensate receiver, by TMT, Carbon steel, vertical, 12.75" x 38". 69 Sq.Ft. Hastelloy tube, tube sheet and head, CS shell, vertical heat exchanger shell rated for 100 psi at 300 degrees F, tubes rated for FV/100 psi at 300 degrees F.
Type: Pump-Vacuum
Manufacturer: Drystar Edwards
Model: EDP250
Condition: Used
Material: Carbon Steel
Air Flow: 320 m3/h (188.3 CFM)
Discharge Pressure: 0.2 bar (2.9 psi)
Orientation: Vertical. Inlet Diameter: 76.2 mm (3 in). Outlet Diameter: 50.8 mm (2 in). Seal Type: Mechanical. Temperature: 176.7 °C (350 °F). Cooling or Seal Water: Yes. Cooling or Seal Water Flow: 613.2 L/h (2.7 GPM).
Type: Pump-Vacuum
Manufacturer: Drystar Edwards
Model: EDP250
Condition: Used
Material: Carbon Steel
Discharge Pressure: 1.15 bar (16.7 psi)
Orientation: Vertical
Inlet Diameter: 76.2 mm (3 in).
Type: Pump-Vacuum
Manufacturer: Drystar Edwards
Model: EDP200
Condition: Used
Air Flow: 322.8 m3/h (190 CFM)
Discharge Pressure: 0.2 bar (2.9 psi)
0.2 mbar / 0.15 Torr, Pump construction 3 Claw, Maximum back pressure 2.2 psig, Nominal Capacity 323 m3 h-1 / 190 ft3 min-1, Capacity @ 7.5 Torr 190 ft3 min-1, Ultimate vacuum 0.2 mbar / 0.15 Torr, Power Consumption @ 7.5 Torr 8 HP. Cooling water flow rate 0.2 – 2.6 gal/min; Noise < 82 dB(A), Total Gas Input (seal purge) 0.7 ft3min-1; Weight 1820. Drect driven. motor is rated Hazardous locations.
Orientation: Horizontal. Cooling or Seal Water: Yes. Cooling or Seal Water Flow: 590.5 L/h (2.6 GPM).
Type: Pump-Vacuum
Manufacturer: Nash
Model: CL
Condition: Used
Material: Carbon Steel
Air Flow: 1,699 m3/h (1,000 CFM)
Discharge Pressure: 0.81 bar (11.8 psi)
24" hg Size: 1002 Test number: 7903116 Life Line T AC motor. Model TBDP Motor style: 6808122G31 Motor rating: 72 amps
Orientation: Horizontal. Inlet Diameter: 203.2 mm (8 in). Outlet Diameter: 101.6 mm (4 in).