vacuum processing vessel with Homogeniser internal pressure 95% vacuum 500 liter batch 316 stainless steel jacketed vessel top cover with a duplicated slow speed agitator with (2) saw tooth blade impellors (1) homegeniser, clamp dished top, weld dished bottom, top cover with hydraulic raise and lower mechanism, built on controls Motor Power: 14.7 kW (19.7 HP). Bowl Capacity: 500 L (17.7 ft3). Jacketed: Yes. Jacket Pressure: 3 bar (43.5 psi). Hydraulics: Yes. Vacuum: Yes. Controls: Yes.
manual variable speed disperser
with Air/Oil hydraulic lift.
304SS shaft 30" long. Motor Power: 3.7 kW (5 HP). Hydraulics: Yes.
Vertical dissolver belt driven shaft Rated for 230/460volts Variable speed drive with rated shaft output speeds from 1000 to 2150 rpm Pneumatic lift for easy tank changes Currently set up with an 8” High shear impeller of stainless steel Capable of mixing batches from 50 to 200 gallons Required 100 psi of clean, dry air Motor Power: 11.2 kW (15 HP). Bowl Capacity: 756.1 L (26.7 ft3). Bowl Diameter: 812.8 mm (32 in). Hydraulics: Yes.
disperser/disolver 50mm diameter x 800mm long shaft with 350mm diameter double saw tooth blade 470-1700 rpm shaft speed built on controls, with bowl holding/clamping mechanism, can use 250 ltr upt to 600 ltr bowls/tanks Motor Power: 17.5 kW (23.5 HP). Bowl Capacity: 450 L (15.9 ft3). Bowl Diameter: 1,000 mm (39.4 in). Bowl Depth: 600 mm (23.6 in). Shaft RPM: 1,700. Hydraulics: Yes. Controls: Yes.
mobile disperser 25mm diameter x 800mm long stainless steel shaft with a 150mm diameter sawtooth blade Motor: 290/500 volt manual rasie/lower mechanism Motor Power: 2.6 kW (3.5 HP).
Twin shaft disperser with 321 SS Vacuum/Dust Lid Designed for mixing powdered and liquid ingredients and for dispersion of the products being mixed Mixer Shaft RPM from 48 to 192 rpm disperser shaft 1440 rpm supplied with one butterfly mixer and one blade disperser Motor Power: 44.7 kW (60 HP). Shaft RPM: 1,440.
150 Gallon,, vertical dispersion mixing machine with jacketed vessel. Dispersall Mixer Type VP, vessel rated for Full vacuum at 4 psi. Vessel size is 33.5" diameter x 41" deep, with removable top and welded bottom. Mounted on a stand. Two top mounted planetary mixers with Teflon scrapers. One under driven high shear mixer. With Waukesha model 25 SS positive displacement pump, with mechanical variable speed drive. Pump serial # D0261137SS. Overhead gantry for top removal. Motor Power: 18.6 kW (25 HP). Bowl Capacity: 566.3 L (20 ft3). Bowl Diameter: 850.9 mm (33.5 in). Bowl Depth: 1,041 mm (41 in). Pressure: 0.28 bar (4 psi). Jacketed: Yes. Jacket Pressure: 1.01 bar (14.7 psi). Shaft Seal: Mechanical. Vacuum: Yes.
agitated jacketed disperser system Working pressure: atmospheric Temperature range: 30 - 60 degrees C (processing), 80 degrees C (washing) Tank dimensions: approx 2400mm diameter x 2450mm straight side Internal baffles on sidewall shaft 101mm diameter x 2650mm long with (4) blade 45 degree pitched paddles, bottom mounted 316L stainless steel disperser APV drive, model IDD, serial # 900877-B, belt driven by 2-speed motor 75/15 kw, 3/50/415 volt, 1475/735 rpm, mechanical seal, 600mm 316L stainless steel disperser blade, mounted on lugs, (1) stainless steel Mono Merlin rotary screw feed pump, type SAE22HIR5/H0141, serial # G306880/01, belt driven by 7.5 kw, 3/50/415 volt, 1450 rpm motor via 3.35:1 ratio gearbox, (1) stainless steel Wigbat inline high speed shearer, belt driven by 22 kw, 3/50/415 volt, 1465 rpm motor, (1) 2 cu.m/hr s/steel Grundfos centrifugal pump, type CR2-130, model C590013-9338, 2900 rpm, 93.8m head, 21 bar @ 120 degrees C (max), (1) plastic seal water tank, (1) 2.5 m3/hr stainless steel Grundfos centrifugal pump, type CR2-110-AAA, model D4255711-9625, 2900 rpm, 68m head, 16 bar @ 120 degrees C Motor Power: 75 kW (100.6 HP). Bowl Capacity: 11,000 L (388.5 ft3). Bowl Diameter: 2,400 mm (94.5 in). Bowl Depth: 2,450 mm (96.5 in). Shaft RPM: 65. Pressure: 1.01 bar (14.7 psi). Temperature: 60 °C (140 °F). Jacketed: Yes. Jacket Material: Carbon Steel.
Agitator type: disperser Design: straight through Mounting flange: 400mm x 400mm square design with 4- 20mm holes, 340mm centers Shaft specifications: 55mm diameter x 1.5m long s/steel shaft with 290mm diameter disperser blade no seal on shaft, Motor Power: 18.5 kW (24.8 HP).
Agitator type: disperser Design: straight through Mounting flange specifications: 400mm x 400mm square design with 4- 20mm holes, 340mm centers Shaft specifications: 55mm diameter x 1.5m long s/steel shaft with 290mm diameter disperser blade, no seal on shaft. Motor Power: 18.5 kW (24.8 HP).