CS jacketed ribbon blender
Internal pressure rated 3 psi @ 200 deg. F to -20 deg. F min.
Jacket is rated 60 psi @ 200 deg. F to -20 deg. F min.
Blender configuration is full flat top cover with center bottom outlet.
Shaft has stuffing box, ribbon design is removable, continuous double ribbon with Teflon wipers
Shaft is driven through a Dodge shaft mounted reducer with a 24.7/1 gear reducer.
Top cover is clamp on removable design.
Top cover openings include 2-4", 1-8", 2-1", and 1 top feed/manway opening of 12"x16". Vessel is fully insulated.
Center bottom outlet is approx. 6" and discharges through a knife gate into a Young motorized 2-3 hp delumper. Design Capacity: 0.28 m3 (10 ft3). Operating Capacity: 0.17 m3 (6 ft3). Vessel Pressure: 13.8 bar (200 psi). Vessel Temperature: -16.1 °C (3 °F). Ribbon Type: Double Helix.
share Mixer, jacket pressure 0.5 bar@110 ° C. SEW gear reducer s/steel discharge vessel Design Capacity: 0.6 m3 (21.2 ft3). Operating Capacity: 0.4 m3 (14.1 ft3). Vessel Pressure: . Vessel Temperature: . Ribbon Type: Plows.
plough share mixer without jacket rated internal atmospheric mixer included 2 choppers, two doors for bottom discharge main V-belt drive data Main drive and gear box dismantled Design Capacity: 1.2 m3 (42.4 ft3). Operating Capacity: 0.6 m3 (21.2 ft3). Vessel Pressure: 1.01 bar (14.7 psi). Ribbon Type: Plows.
jacketed Loedige ploughshare mixer with choppers machine #7644 behalter #1952 jacket pressure 0.5 bar @ 110 deg C (180ltr) chamber 1110mm diameter x 2960mm straight side, internal rotor with (10) plow blades and (2) end blades, blades are removable via a reduction gearbox, packed gland on shaft, c/steel jacket on straight side only. (4) 321 s/steel choppers each belt driven by a 2-speed motor 7.5 kw 3/50/230/460/380/420 volt, 2950 rpm or 8.5 kw, 3/60/440/480 volt, 3510 rpm (8) spray nozzles, openings top: 3-350mm, jacket: 6-50mm, straight side: 2-540mm wide x 400mm high inspection doors, 2-50mm (for probes), bottom: 3-300mm long x 200mm wide each with a pneumatic operated valve, 8-25mm (spray nozzles, Design Capacity: 3 m3 (105.9 ft3). Operating Capacity: 2 m3 (70.6 ft3). Vessel Temperature: 110 °C (230 °F). Ribbon Type: Plows. Agitation Shaft Sealing: Packing.
with cylindircal housing ribbon agitator motor : 500 V/78 A/50 Hz/1485 rpm weight motor 660 kg, inlet and outlet filters, and documents Design Capacity: 20 m3 (706.3 ft3). Operating Capacity: 13 m3 (459.1 ft3). Ribbon Type: Single Helix.
ploughshare mixer with (4) side choppers
Job 167
Chamber is 1.5m I.D x 3370mm long
packed glands on shaft
shaft speed 74 rpm
2-speed motor
chopper direct driven by a 2-speed motor, 5.5 kw, 3/50/220/240/380/420 volt, 1450 rpm or 6.4 kw, 3/60/250/280/440/480 volt, 1750 rpm,
openings top: 4-250mm x 250mm with pneumatic slide valves, 1-150mm, side: 2-750mm x 620mm inspection doors, 4-25mm, center bottom: 1-350mm x 250mm with actuated valve Design Capacity: 6 m3 (211.9 ft3). Operating Capacity: 4 m3 (141.3 ft3). Ribbon Type: Plows. Agitation Shaft Sealing: Packing.
cylindrical slurry blender, Has single shaft agit w/approx (12) paddle arms. Sprocket for chain drive, takes 25 HP. Openings: top 2-12", 2-10", 2-2"; heads 2-20"; 1-6" and 1-2" outlet. Design Capacity: 12.7 m3 (450 ft3). Operating Capacity: 8.5 m3 (300 ft3). Ribbon Type: Paddles.
ribbon blender Vessel rated for atmospheric Jacket code stamped designed for batch processing 304 Stainless Steel body with 304 SS dimple jacket Shell rated atmospheric @ 100 degrees F. Jacket rated for 150 psi @ 100 degrees F. Estimated heating surface area is 165 Sq.Ft. AC Reliance High Efficiency XE motor Dodge TM gear reducer Dodge Gear Reducer is a size # 281TU900A2, ID # 40401934PF rated for 30 HP, 24 rpm output with a 47:1 ratio. Chain driven. Two 8" pneumatic discharge gate valves. Closed top with two grated openings. Design Capacity: 9.9 m3 (350 ft3). Operating Capacity: 7.1 m3 (250 ft3). Vessel Pressure: 1.01 bar (14.7 psi). Vessel Temperature: 37.8 °C (100 °F). Operational mode: Batch. Ribbon Type: Double Helix. Paddle/Ribbon MOC: Carbon Steel.
Ribbon Blender Size 300L, Single ribbon design, packing glands on shaft, removable ribbon design. Ribbon has a large sprocket on end of shaft for chain drive, no drive with unit. Blender trough is 60" wide x 144" long x 72" deep, with a bolted on SS cover The shaft measures 7 1/4" od. Design Capacity: 8.5 m3 (300 ft3). Operating Capacity: 7.8 m3 (275 ft3). Ribbon Type: Single Helix. Paddle/Ribbon MOC: Stainless Steel Other. Agitation Shaft Sealing: Packing.
Operating capacity: 150 cu. ft. cover is 304 SS Continuous paddle mixer single shaft Job # FT-07-13366, Purchase number 2409/14 Motor voltage: 230/400/460 volts Motor type: AEEANE motor is CE certified Gear reducer is a Dodge TA315H output rpm 117 rpm. Dimensions are 42" wide x 370" long x 75" inch tall. Design Capacity: 6.1 m3 (215 ft3). Operating Capacity: 4.2 m3 (150 ft3). Operational mode: Continuous. Ribbon Type: Paddles. Paddle/Ribbon MOC: Stainless Steel 321.
with cylindircal housing ribbon agitator stuffing box weight motor 660 kg, inlet and outlet filters, and documents Design Capacity: 20 m3 (706.3 ft3). Operating Capacity: 13 m3 (459.1 ft3). Ribbon Type: Single Helix.
ribbon mixers with cylindircal housing, ribbon agitator stuffing box weight motor 660 kg, inlet and outlet filters Design Capacity: 20 m3 (706.3 ft3). Operating Capacity: 13 m3 (459.1 ft3). Ribbon Type: Single Helix.
ribbon blender trough only. Trough 56" wide x 162" long. CS double ribbon blender. 10 1/2" dia CS shaft. W/CS double ribbon 1" thick x 3 3/4" wide inner ribbon, 1" thick x 2 3/4" wide outer ribbon. Design Capacity: 7.1 m3 (250 ft3). Operating Capacity: 4.2 m3 (150 ft3).
horizizontal continuator Jkt rated 14.9 psi @ 250 deg F. SS cover Pillow block bearings. Unit has paddle type agit w/paddles running the length of the blender. Design Capacity: 7.1 m3 (250 ft3). Operating Capacity: 4.2 m3 (150 ft3). Ribbon Type: Paddles.
horizontal, twin paddle mixer SO # C-l6001 with 10 Gauge covers and flat top with 3 "V" belt sheeves through a Dodge single reduction torque arm. Torque arm # T-17 Capable of continuosly handling 48,000 lbs/hr. Design Capacity: 1.13 m3 (40 ft3). Operating Capacity: 0.85 m3 (30 ft3). Operational mode: Continuous. Ribbon Type: Paddles.
Laboratory stainless steel Loedige mixer with one chopper and one door (150mm) for bottom discharge Motor: 220/380 V main V-belt drive data: 2.2 kW, 220/380 V, 50 Hz, 1.4200 rpm Design Capacity: 0.05 m3 (1.77 ft3). Operating Capacity: 0.03 m3 (1.06 ft3).
stainless steel ribbon blender. Chamber 60" long x 38" wide x 51" deep, Packing glands. Bolt flat top w/17" x 12" hinged manway. Openings: top 3-9"; btm 1-5" w/valve. worm and worm wheel. Design Capacity: 1.5 m3 (53 ft3). Operating Capacity: 1 m3 (35.3 ft3). Ribbon Type: Interrupted ribbon. Agitation Shaft Sealing: Packing.
end bottom discharge with pneumatic operated slide valve, 2-650mm x 650mm inspection ports with hinged covers. Design Capacity: 0.6 m3 (21.2 ft3). Operating Capacity: 0.4 m3 (14.1 ft3). Ribbon Type: Interrupted ribbon. Paddle/Ribbon MOC: Carbon Steel.
end bottom discharge with pneumatic operated slide valve, 2-650mm x 650mm inspection ports with hinged covers. Design Capacity: 0.6 m3 (21.2 ft3). Operating Capacity: 0.4 m3 (14.1 ft3). Ribbon Type: Interrupted ribbon. Paddle/Ribbon MOC: Carbon Steel.
jkt ribbon blender. Total capacity 2600 liter. Jkt rated 8 bar. 1470 rpm motor (no motor) 240 rpm input, 36 rpm output. Shaft 6" (150mm) dia. Openings: top 34" long x 16" wide, 1-9"; jkt 2-1", 4-1/2"; center btm outlet approx 8" dia w/pneumatically operated swing valve, discharging into chute 31" x 15". Fitted hinged full cover w/counter weight. Cover has vert charge hole approx 2'6" x 1'6" w/hinged cover. Design Capacity: 2.6 m3 (91.8 ft3). Operating Capacity: 2 m3 (70.6 ft3). Ribbon Type: Interrupted ribbon.
continuous mixing 25,000 kg/hr 8000 liter(2113 gallon) total capacity with (2) side hatches with hinged covers and hand wheel swing bolts, (1) 16" x 24" ID top drive end charge port, (1) 16" ID vent port top center, and (1) 17" x 20" ID bottom end discharge port. Internal shaft with plows 3/60/230/460 volt 1750 rpm down to 90 rpm Weight 17,200 lbs. Design Capacity: 8 m3 (282.5 ft3). Operating Capacity: 5 m3 (176.6 ft3). Operational mode: Continuous. Ribbon Type: Plows.
ribbon mixer Ends of trough unbolt for ribbon removal. Packing glands on shaft. w/Holroyd gear reducer btm discharge with gate valve. Design Capacity: 0.99 m3 (35 ft3). Operating Capacity: 0.48 m3 (17 ft3). Ribbon Type: Interrupted ribbon. Agitation Shaft Sealing: Packing.
ribbon mixer Single interrupted ribbon design. Ends of trough unbolt for ribbon removal Packing glands on shaft. No gearbox or motor 6" x 6" (152mm x 152mm) end bottom discharge with gate valve. Design Capacity: 1 m3 (35.3 ft3). Operating Capacity: 0.5 m3 (17.7 ft3). Ribbon Type: Interrupted ribbon. Agitation Shaft Sealing: Packing.
Robinson CS ribbon blender Double ribbon design Outboard bearing. Packing gland. Center discharge. Full cover. Complete w/drive. Removable rotor. Design Capacity: 0.42 m3 (15 ft3). Operating Capacity: 0.28 m3 (10 ft3). Ribbon Type: Double Helix. Paddle/Ribbon MOC: Carbon Steel. Agitation Shaft Sealing: Packing.
Unit has twin 2 1/2" diameter shafts with adjustable paddles. Packing glands on shafts. Has 2-section bolt on cover with 10" x 10" feed port, 12" x 16" with loose cover. 26" x 18" bottom discharge. 5 HP, 3/60/230/460 volt UL label, is not included. Design Capacity: 0.42 m3 (15 ft3). Operating Capacity: 0.28 m3 (10 ft3). Ribbon Type: Paddles. Agitation Shaft Sealing: Packing.
Jacketed, Carbon steel body and Jacket, 316 SS Clad internal(contact) Single Ribbon Mixer. with CS jacket. Packing glands on shaft, Chain drive with by approximately 30 HP motor and reducer. Design Capacity: 8.5 m3 (300 ft3). Operating Capacity: 5.7 m3 (200 ft3). Ribbon Type: Single Helix. Agitation Shaft Sealing: Packing.
125 liter bowl capacity, Bowl type mixer with clamped flat top and pneumatic assist for raising the lid, lid has a 6" latching inlet and a 2" sanitary quick fitting. Unit has a 5" sanitary, pneumatic flush valve on side bottom of bowl for discharge. Sanitary polished finish on both internals and exterior. Unit has a high intensity mixing blade in bottom of the bowl and a high speed chopper through side wall. Air purge seals on chopper. Electric connections are plug in, air line is a quick coupling. Controls are self contained with the unit. Design Capacity: 0.13 m3 (4.4 ft3). Operating Capacity: 0.08 m3 (2.8 ft3). Ribbon Type: Paddles. Controls: Yes.
plow mixer
Unit has (2) choppers.
.253 " thick.
with a CS jacket. jacket is 0.140 " thick Packing gland on mixing shaft and on choppers.
Plow baldes on shaft,
with UL class 1 Group D lable
Chain drive through a gear reducer with is direct coupled to the shaft
Each chopper is a direct drive with a 10HP Pacemaker motor, 3/60/220 440 volt, 3475 rpm, 215TZ frame.
Openings include: (2) 14" x 14" flush side access doors with hinged covers with clamp handles, (1) 15' x 12" top feed opening, (1) 8" top; (1) 3" end bottom outlet. Design Capacity: 0.3 m3 (10.6 ft3). Operating Capacity: 0.2 m3 (7.1 ft3). Vessel Pressure: 1.01 bar (14.7 psi). Vessel Temperature: 148.9 °C (300 °F). Ribbon Type: Plows. Agitation Shaft Sealing: Packing.
jacketed Paddle Blender Rated for 50 psi at 300 degrees F 300 gallon liquid capacity. Scraped surface paddles. Design Capacity: 1.13 m3 (40 ft3). Operating Capacity: 0.74 m3 (26 ft3). Ribbon Type: Paddles. Paddle/Ribbon MOC: Stainless Steel 321. Agitation Shaft Sealing: Packing.
paddle mixer 36 rpm. paddle speed.Packed glands. Unit has bottom discharge with manual valve. Design Capacity: 0.5 m3 (17.7 ft3). Operating Capacity: 0.27 m3 (9.6 ft3). Agitation Shaft Sealing: Packing.
"L" Series ribbon blender Features: hinged lid, removable endplate, interrupted ribbon, external bearings, packing glands 220/250/380/440 volt 69.3 rpm Unit with a built-in on/off switch. Openings: inlet 18" x 9"; outlet 1-4" with manually operated 'V' Series discharge valve. Design Capacity: 0.1 m3 (3.5 ft3). Operating Capacity: 0.07 m3 (2.3 ft3). Ribbon Type: Interrupted ribbon. Agitation Shaft Sealing: Packing.
Shape: cylindrical Mixer type: ribbon mixer Ribbon type: un-interrupted Shaft seal: mechanical 3/50/380/660 volt 1440/205 rpm non-flameproof geared motor External bearings on shaft. Openings: top 19" x 18" inspection cover with 6" opening, 1-9" feed with hopper, 1-6"; straight side (2) 18" x 18" inspection doors; bottom 6" x 70" long hydraulic operated discharge. Unit with 316 stainless steel 34" diameter x 7" straight side x 36" cone feed hopper. Design Capacity: 1.2 m3 (42.4 ft3). Operating Capacity: 0.8 m3 (28.3 ft3). Ribbon Type: Single Helix. Agitation Shaft Sealing: Mechanical.
ribbon speed 158 rpm (max) 3/50/380/415 volt trough 1.2m long x 300mm wide x 350mm deep hinged top cover Design Capacity: 0.06 m3 (2.1 ft3). Operating Capacity: 0.04 m3 (1.41 ft3). Ribbon Type: Interrupted ribbon.
Type: Ribbon blender ribbon speed 158 rpm (max) 3/50/380/415 volt hinged top cover, Design Capacity: 0.06 m3 (2.1 ft3). Operating Capacity: 0.04 m3 (1.41 ft3). Ribbon Type: Interrupted ribbon.
Blender type: Ribbon blender via gearbox hinged top cover Design Capacity: 0.05 m3 (1.77 ft3). Operating Capacity: 0.03 m3 (1.17 ft3). Ribbon Type: Interrupted ribbon.
ribbon blender with removable endplates external bearings, packing glands Ribbon speed 37 rpm Design Capacity: 0.66 m3 (23.3 ft3). Operating Capacity: 0.44 m3 (15.5 ft3). Ribbon Type: Interrupted ribbon. Agitation Shaft Sealing: Packing.
15000 liter 1.9m diameter x 5m straight side 400/415 volt 1477 rpm packed glands on shaft openings top: 3-498mm, side: 3-600mm x 550mm inspection doors, 2-90mm ( 1 with sampling device), bottom: 1-438mm x 438mm with manual slide valve (center) Design Capacity: 15 m3 (529.7 ft3). Operating Capacity: 10 m3 (353.1 ft3). Agitation Shaft Sealing: Packing.