Air Conditioning system With 2 hermetically sealed Copeland compressors. (1) Evaporator blower 7.5 hp 3/60/460volt, (4) condenser fans each .75 HP 3/60/460 volt.

Ammonia mini screw compressor Direct coupled to a US Electric AC motor. 3 ph, 50 or 60 Hz, 460 Volts 226 FLA ID # D08-H534A-H and Catalog # D250E1FS Model # H634A On board mounted Vilter Microproccessor control system. Tank rated 300 PSIG @ -20 to 400 degrees F.

324 kW CIAT chiller with single screw open type compressor 349A , Refrigerant R 404 A, chilled medium water/MEG 45%, evaporator pressure drop 5,8 mCE, cooling medium water 27/32 ° C, flow rate 83, 5 m³/h, condenser pressure drop 5,1 mCE, water cooled condenser pressure refrigerant side 30 bar, water side 10 bar, evaporator 10 bar

307 KW packaged reciprocating chiller type JL 84EF 3S serial # L9024/08J voltage by 3~/400 V/50Hz/169 FW LRA/780 PW LRA 8 cylinder, with reduction capacity 100-75-50-25 mfd by YORK International LTD - UK, type LCHM115WL 50E, serial # 20270, voltage by 3~/380-400 V/50Hz; (1) 54m³/Hr evaporator, type 1207 H, 272 tubes with 90 liters volume 272 tubes with 90 liters volume; (1) 372 KW Condenser WL, Type PC98, 127 tubes with capacity 77 liters Flow 5.2-22 l/s Main condenser water out 30-41 degrees C, main condenser water recovered 30-52 degrees C Power absorption by motor 112 kw Localized temperature Min. 4,4 degrees C, Max. 46 degrees C With separately KSB c/steel centrifugal pump, ETANORM-G 65-200 G11, serial # 1-917-844015/1 with 18.5-22.0 KW LEROY SOMER e-moter, CE confirmed, data: 380-460V /50-60Hz/2.933-3.540 rpm

307 KW packaged reciprocating chiller type JS 84 EF 3S, serial # L9024/08J, factory test pressure 450 PSIG voltage by 3~/400 V/50Hz/207 FW LRA/975 PW LRA 8 cylinder, with reduction capacity 100-75-50-25 (1) control micro panel, mfd by YORK International LTD - UK, type LCHM115WL 50E, serial # 20270, voltage by 3~/380-415 V/50Hz (1) 54m³/Hr c/steel evaporator, type 1207 H 272 tubes with 90 liters volume (1) 372 KW c/steel Condenser WL, Type PC98, 127 tubes with capacity 77 liters Flow 5.2-22 l/s Flow 5.2-22 l/s. Main condenser water out 30-41 degrees C, main condenser water recovered 30-52 degrees C. Power absorption by motor 112 kw Localized temperature Min. 4,4 degrees C, Max. 46 degrees C With separately KSB c/steel centrifugal pump, ETANORM-G 65-200 G11, serial # 1-917-946154/1with 18.5 ABB e-moter,data: 220-380 V/50Hz/2.930 rpm

Zero Degree Glycol chiller Chiller use's 1250 lbs. of R-22 refrigerant Compressor is by FES and exchangers are by FES, and Thermo Power-York. MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F Glycol Flow= 500 GPM, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F. with FES digital micro control panel.

Three systems, Compressor MTS36SAAD460/200--with VFD wall mounted.

Freon has been evacuated.

324 kW CIAT chiller with single screw open type compressor 349A , Refrigerant R 404 A, chilled medium water/MEG 45% evaporator pressure drop 5,8 mCE cooling medium water 27/32 ° C flow rate 83, 5 m³/h condenser pressure drop 5,1 mCE water side 10 bar, evaporator 10 bar

144.5 liter/second cooling tower 35 to 30 degrees C @ 21 degrees C entering wet bulb

20 Ton , 3000 SCFM Roof top heat and ac system--12 SEER

2 cell galvanised cooling tower 38 degrees C inlet temperature, 23 degrees C outlet temperature, 18 degrees C wet bulb temperature 3 phase fan driven by 16/3.7 kw, 442/221 rpm motor, fan diameter is 84", 20 degree trial pitch angle, (1) electrical heater in the bottom, manufactured by Heatrae Industrial ltd, type 1H/10, 9 kw , 415 volt, handrail around the top, ladder,

water cooled rotary chiller Requires 575 lbs Evaporator rated for Propylene Glycol 3 pass, inlet @ 32 degrees F, outlet @ 25 degrees F. Condenser rated for cooling water, 2 pass, 85 degrees F inlet and 95 degrees F outlet. Machine efficiency rated for 1.377 kw/ton. Trane condenser NB # 74806 Serial # 24806, rated for 200 psi at 300 degrees F. Built in 2000. Inlet and outlet nozzles are 9". 128" long x 75" wide x 80" high. Electronic controls and rated for explosion proof atmosphere.

NC-8241 galvanised steel cooling tower 45 kw, 3/50/415 volt gear reducer model 22.3 gear ratio: 3.79:1 inlet temp 28 to 40 deg C, recool temp 23 to 30 deg C wet bulb temp 18 to 25 deg C (2) electric heaters manufactured by Heatrae Industrial ltd, handrail around top, 2 x ladders, 3050mm diameter fan, manufactured by Brook Hansen, type 120-6-24L/22MT, serial # GH036299, driven by 45 kw, 3/50/380 volt, 1470 rpm motor, tower with 3 x Durco 185 m3/hr @ 23 deg C centrifugal pumps, type Chemstar, size 150x125-400/400, 50m head, 1500 rpm, S.G 1.00, driven by 45 kw, 3/50/415 volt, 1470 rpm Exn 11 T3 motor, mechanical seal.

600 to 850 tons water cooled packaged centrifugal chiller, style 9993715020 factory charged 330, feild charged 1320, 35 degrees C leaving condenser water (1) Synder General model CE109KAZ45K2X centrifugal compressor, style 099371502F, serial #5ZA0080101, 3 phase, 50 Hz, 415 volt, 1141 LRA, 3422 Wye, 585 RLA, (1) Snyder General Evaporator, model E3016492RC, style 099371502E, serial #5ZA0014500, national board #21741, working pressure 180 psi @ 122 degrees F, (1) Synder General condenser, model C30164YY2RD, style 0993715020, serial #5ZA0017600, national board #21772, working pressure 225 psi @ 250 degrees F,

water cooled skid mounted packaged chiller, power input 262Kw, R-134A refrigerant, 3 phase, control voltage 110 volt, 1 phase, 50Hz, operating temperature conditions from -8 to +15 degrees C leaving water temp on evaporator side, (3) McQuay screw compressors, model HSW220QL27YA, style M350234005, Motor style M350233701, 3 phase, 50/60 Hz, 400/600 volt, (1) shell and tube evaporator, manufactured by Provides srl, model 55190989, serial #29319.P, pressure tubeside 24.5 bar @ -10/+75 degrees C, (109.3 liter), shell 10.5 bar @ -10/+30 degrees C (445liter), (3) condensers manufactured by Provides srl, model 2V31058, fabrik #17425, pressure 24.5 bar @ 10/80 degrees C, (3) electronic expansion valves, model SEP-OLIO, pressure 24.5 bar @ -10/+120 degrees C, built on marshalling panel,

rotary chiller Optimus helical rotary Hermetically sealed motor Water cooled.

rotary chiller Optimus helical rotary, Hermetically sealed motor, Water cooled.

2 ton/hr flaked ice making system, consisting of: (2) model 60, 1 ton/hr (each) flaked ice making machines, manufactured by Northstar, each with a refrigerant capacity of 0.25 cu.m, refrigerant R-717, chamber 74" diameter x 72" high, scraper type agitator, M.D.M.T -50 deg F @ -7.5 psi (1) 78.8 tons capacity single rotary screw Ammonia chiller compressor, manufactured by FES International, model 225-HE, serial # 2030179J, refrigerant R-717, power 185 kw, saturated suction pressure 3.6 psig @ -20 deg F, saturated discharge pressure 181.1 psig @ 95 deg F, driven by 185 kw, 3/50/415 volt, 2950 rpm drip proof motor, 2-oil filters, economiser, (1) oil separator, serial # 87516, N.B # 3439, working pressure 250 psig @ 200 deg F(max), 24" diameter x 108 long, (1) c/steel horizontal liquid receiver, 480mm diameter x 1960mm straight side, dished heads, mounted on c/steel feet, (1) Evapco cooling tower condenser, model LSCA-110, serial # EUR-672 (1) de-oil tank (1) Sub-cooler heat exchanger, manufactured by Ketema Inc, type DXMB Ammonia cooler, size 807-0-8P-10, N.B # 1431, tube side M.A.W.P 300 psi @ 300 deg F, M.D.M.T -20 deg F @ 300 psi, shell side M.A.W.P 300 psi @ 300 deg F, M.D.M.T -20 deg F @ 300 psi. (1) approx 22.7-56.6 m3/hr chiller compressor, manufactured by Bitzer, serial # 900394, model 4P.3, 3/50/1450 rpm, belt driven by 11 kw, 3/50/415 volt, 1460 rpm motor

CentraVac Low temperture, Series R chiller

• Drive motor: 197 kW, rated for 460 volt, 3 ph, 60 Hz Requires 705 lbs Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. Condenser NB # 44012, serial # 44012, built in 1996, rated for 300 psi at 300 degrees F. ( 2 pass design) Low tempreture unit can obtain range of 39-20 degrees F. 6 inch connections process & water side. Electronic controls, rated for explosion proof atmosphere.

air cooled chiller. (3) Carlyle reciprocating hermetically sealed compressors Mdl 06EY-099140B motor 3/60/575 volt

300psig low side. Rated for 289 BHP.

Dual direct drive semi-hermetic centrifugal compressors rated 0.45Kw/ton efficiency. Driven by (1) 893KW (LH Circuit) and (1) 946KW (RH Circuit) motors, 4160V, 60Hz, 3 Phase. Uses low pressure refrigerant to produce low refrigerant emissions. (R-123 Charge- LH 2650 lbs & RH 2650 lbs.) Maximum working pressure is 15 psi on both high and low sides. The condenser and evaporator have high efficiency tubing providing greater surface area. Packaged design with electronic controls employing the latest in technology for energy usage.

CentraVac Low temperture Series R chiller Requires 705 lbs. inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass)
Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2 pass design) Low tempreture unit capable of obtaining a range of 39-20 degrees F. 6 inch connections process & water side. Electronic controls, rated for explosion proof atmosphere.

Refrigeration compressor turbine.

duty available 700,000 BTU/hr (205 kw) contract # 40391 16 bar (low), rated 180KW, 3/50/400 volt, system includes

• (4) Refrigerant compressors,
• (2) 6.67 square meter condensers type 09RQ-022-054, shell and tube design, refrigerant volume 62 liter, water volume 28 liter, outside shell diameter 273mm,
• (1) 34.97 square meter cooler condenser type 10HA-160, shell and tube design, refrigerant volume 116.8 ltr, water volume 199 literr, (258) 2780mm long tubes, shell outside diameter 406.4mm, 4-refrigerant passes, (9) baffles, minimum water flow 9.9 ltr/sec,