stainless steel (polished) Frewitt Delumper with crushing and grinding system, type Delumpwitt, upto 9000kg/hr flow rate, system includes: (1) stainless steel Frewitt Conwitt 250 conical sieve mill, serial #12014519069, internal CE 1258 Ex II 1Dckb T157 degrees C X, external CE Ex II 3D c Ex tD T125 degrees C X, (1) stainless steel infeed hopper, (1) stainless steel Frewitt crushing unit, serial #12014532028, internal CE 1258 Ex II 1Dckb T157 degrees C X, external CE Ex II 3D c Ex tD T125 degrees C X, (1) Frewitt Conwitt 250 vibrating unit, serial #1201459069, internal CE 1258 Ex II 1Dckb T157 degrees C X, external CE Ex II 3D c Ex tD T125 degrees C X, (1) servolift elevating/lifting machine, serial #12885, all mounted on a stainless steel frame

fluidised opposed jet milling (grinding air pressure 6 barg, nozzle 0 16mm), 1250 dm3 grinding bin volume, 80 mbar permissible operating pressure in grinding bin, max operating pressure in grinding bin, 5- nozzles, nozzle diameters 14mm, 16mm, 18mm, classifier has 3-wheels, each wheel with 60 vanes wide pitch, narrow pitch 120 vanes, max wheel speed 4000 rpm each whees driven by 5.12 - 16 kw,3/50/415 volt, 940/2940 rpm motor, (1) 1100 liter carbon steel feed hopper weld dished top, weld coned bottom, bottom outlet with 150mm diameter carbon steel screw conveyor, 15.1 rpm speed,

1000 kg/h 120x160 mm drum screen, scraper drum 120x160 mm

10 HP Fixed knives blunt one side, w/reversible rotor. Unit driven by approx 10 HP, US varidrive. Screw feed driven by 1/4 HP, 3/60/230/460 volt US varidrive 3/60/230/460 volt US varidrive.

Alexanderwerk Pharma pressure internal -1/3 bar @ 145 deg C (91ltr), jacket -1/3.3 bar @ 145 deg C (13ltr) underdriven by a DIETZ 400-690 Volt

Single Rotor Crusher fixed hammers. Crusher walls are 1/4" thick, shaft is 1 15/16" diameter. Unit has a SS feed chute, screen discharge with 1/2" holes230/460 volt motor.

w/(3) feed screws. Discharge hopper w/out valve Stirrup type hammers. Rotor belt driven by 30 HP, 3/60/230/460 volt, 1770 rpm TEFC motor. Feeder belt driven by 1/2 HP, 3/60/220/440 volt, 1140 rpm TEFC motor.

100 kg typical batch weight (Polished to a 0.1 Ra Min finish) Standard capacity range is 120-240 liters. This granulator features a through the wall design where the utilities are located outside the clean room. It has a jacket for the base and bowl with temperature sensor. The main impeller is capable of being raised and lowered. The side chopping system has a variable speed control. Discharge is into a through the wall mill model U-20. Features sanitary design and Clean in place. This multipurpose machine can process dry powders, aqueous and solvent granulations, effervescent products, and melt palletization applications. This machinery is electronically controlled. Can be used with Fluid bed dryer IPP stock # 233968.

Mikro Atomizer Rated for 6,000 rpm. Capable of handling capacities from 100 to 1000 lbs/hr, dependent on the material, this machine handles 3 functions in one machine. Pulverizes, air classifies and conveys the material.

fluidised opposed jet milling (grinding air pressure 6 barg, nozzle 0 16mm) 1250 dm3 grinding bin volume, 80 mbar permissible operating pressure in grinding bin, max operating pressure in grinding bin, 5- nozzles, nozzle diameters 14mm, 16mm, 18mm, classifier has 3-wheels, each wheel with 60 vanes wide pitch, narrow pitch 120 vanes, max wheel speed 4000 rpm, each whees driven by 5.12 - 16 kw, 3/50/415 volt, 940/2940 rpm motor, (1) 1100 liter carbon steel feed hopper weld dished top, weld coned bottom, bottom outlet with 150mm diameter carbon steel screw conveyor, 15.1 rpm speed,

Pressure shock resistant design

Rated for 1500 kg./Hr,

pressure 11 bar at 70 degrees C,

side bottom inlet 390mm diameter and 125mm diameter,

top discharge 340mm,

36 pin disk underdriven by 45kW, 3/60/460 volt, 1775 rpm IP65 motor,

24 blade classifier under driven by 11kW, 3/60/460 volt, 1760 rpm motor,

Classifier is rated max. 3100 rpm.

speed 720 to 1775 rpm.

400mm air intake nozzle,

hinged top cover with manually operated opening mechanism

Atomizer air swept classifying pulverizer/mill all parts which are in contact with the product are stainless steel, capacity is 100 kgs to 2000 kg/hour, down to D90 = 20 microns, the mill grinds, classifies and conveys the product the Mikro-Atomizer uses air flow to convey materials to the grinding zone, size reduction occurs when hammers fitted to the rotor impact particles @ 4000 to 8000 rpm, a deflecting liner returns oversized particles to the hammer impact zone for further reduction, the ground materials are then conveyed to the classifier wheels which are mounted to the grinding rotor, larger particles are rejected for regrinding as the desired particles are air conveyed by internal fan blades and exit the mill for collection

Atomizer air swept classifying pulverizer/mill, all parts which are in contact with the product are stainless steel, capacity is 100 kgs to 2000 kg/hour, down to D90 = 20 microns, the mill grinds, classifies and conveys the product the Mikro-Atomizer uses air flow to convey materials to the grinding zone, size reduction occurs when hammers fitted to the rotor impact particles @ 4000 to 8000 rpm, a deflecting liner returns oversized particles to the hammer impact zone for further reduction, the ground materials are then conveyed to the classifier wheels which are mounted to the grinding rotor, larger particles are rejected for regrinding as the desired particles are air conveyed by internal fan blades and exit the mill for collection

fluidised opposed jet milling (grinding air pressure 6 barg, nozzle 0 16mm) 1250 dm3 grinding bin volume, 80 mbar permissible operating pressure in grinding bin, max operating pressure in grinding bin, 5- nozzles, nozzle diameters 14mm, 16mm, 18mm, classifier has 3-wheels, each wheel with 60 vanes wide pitch, narrow pitch 120 vanes, max wheel speed 4000 rpm each whees driven by 5.12 - 16 kw, 3/50/415 volt, 940/2940 rpm motor, (1) 1100 liter carbon steel feed hopper weld dished top, weld coned bottom, bottom outlet with 150mm diameter carbon steel screw conveyor, 15.1 rpm speed,

Ni-Resist, Micro Atomizer Atomizer set up in its own building complete with the following accessories: Feed hopper is 33" wide x 39" long, Super sack unloader with dust collector & bagger, 50 Sq.Ft., 304 SS baghouse with fan. Takes 30 socks 4" diameter x 6' long, Takes 30 socks 4" diameter x 6' long, 51" w x 52" d x 68" h chamber.

Hammer mill pulverizer with product heater with left hand drive Rated for 1200 rpm with 12 hammers Machine has auto oiler for bearings. With Spinner and blower to move sized product to plant. Weight on hammer mill 14,660 lbs with spinner 22,565 lbs. Product heater is rated 6 mm BTU, CS, North American air dryer powered by natural gas With Blower, Gas train and heater installed on skid. Skid dimensions are 193" long x 61" wide x 74" high. Air inlet is rectangular flange 15" x 11". Air Outlet is round 19" diameter Complete automated fuel train by, with series 2300 turbo blower. Product air heater is also listed under IPP # 221295.

rated: 11 DCuM, 0.05 bar, 60°C., 10 bar overpressure stud disc diameter: 315 mm, plate beater: 298 mm, swing beater: 298mm, air inlet: DN 100 mm

Hammer mill pulverizer with product heater with left hand drive Rated for 1200 rpm with 12 hammers Machine has auto oiler for bearings. With Spinner and blower to move sized product to plant. with spinner 22,565 lbs. Product heater is rated 6 mm BTU, CS, North American air dryer powered by natural gas With Blower, Gas train and heater installed on skid Skid dimensions are 193" long x 61" wide x 74" high Air inlet is rectangular flange 15" x 11". Air Outlet is round 19" diameter Complete automated fuel train by, with series 2300 turbo blower. Product air heater is also listed under IPP # 221294.

bare mill only. (no drive). Air flow and power requirement are 6000 acfm,
Fan power 40 Hp., Mill power minimum 50 HP, maximum 100 HP. The Imp mill is designed for low cost, dependable, grinding for fine to medium grinds.

Machine # 04531460 1 x perforated die cylinder 70MM diameter with 1mm holes and 1 x solid pressure cylinder 60mm diameter working length 80mm Approximate throughput range 30-50 kg/hr. Driven by us Motor series 2000. Ratio : 4, output torque 520 lbs. Hazardous location class 1, group D, class II, groups F&G.

oscillating granulator, W/feed hopper

contraplex wide chamber impact pin mill with 2-driven counter rotating pin discs throughput 800 KG/hour, housing disc belt driven by 23kw, 3/50/660 volt, 1500 rpm Ex II T3 motor, front door disc belt driven by 23kw, 3/50/660 volt, 1500 rpm Ex II T3 motor, hinged front door

48 kw contraplex wide chamber impact pin mill with 2-driven counter rotating pin discs throughput 1.2 ton/hour housing disc belt driven by 48kw, 3/50/660 volt, 1480/2800 rpm Ex II T3 motor, front door disc belt driven by 36/49kw, 3/50/660 volt, 1150/1550 rpm Ex II T3 motor, hinged front door,

Atomizer air swept classifying pulverizer/mill parts which are in contact with the product are stainless steel capacity is 100 kgs to 2000 kg/hour, down to D90 = 20 microns, the mill grinds, classifies and conveys the product the Mikro-Atomizer uses air flow to convey materials to the grinding zone, size reduction occurs when hammers fitted to the rotor impact particles @ 4000 to 8000 rpm, a deflecting liner returns oversized particles to the hammer impact zone for further reduction, the ground materials are then conveyed to the classifier wheels which are mounted to the grinding rotor, larger particles are rejected for regrinding as the desired particles are air conveyed by internal fan blades and exit the mill for collection

pressure internal -1/3 bar @ 145 deg C (91ltr), jacket -1/3.3 bar @ 145 deg C (13ltr), underdriven