• Sheathing covering Insulation rock wool and puff , 304 SS sheathing completely sealed to 0.4 bar
• With thermowell and dip pipe.
• Internal : Buff polished to 240 Grit.
• External: Buff polished to 180 Grit.
• UNDER FABRICATION, WILL BE FACTORY COMPLETE WEEK OF DEC 15 2025! Support Type: Lugs.

• Rated for lethal service.
• Nozzles with Inconel 625 inlay.
• Glasslined beavertail baffle with WIKA TR-10 & PT100 temperature probes.
• Mechanically sealed agitator: FlowServe MD-200 DN140.
• See sales comments for additional options.

UNUSED

Internal finish 240 grit buff polished-Bright polished, external buff polish to a matte finish. ASME NB rated, and "U" stamped.

welded dish heads (2:1) 12 mm thick

Coil: 114 mm OD x 4 mm thick,

Limpet covers bottom dish and 2615 mm of straight side (pitch 150mm). Coil heating surface area.

With Insulation rings and upper drip ring. Two top lifting lugs and one tailing lug.

20" Manhole with Cover and davit arm assist, one 6" sight glass, Support Type: Lugs.

jacketed high pressure reactor Jacket volume: 1700 liter Total length: 8000 mm Jacket wall thickness: 30 mm

MFR # 12269 Model SA-3000 Special three top lifting lugs, six leg couplings, four side wall lugs Shell=1 & 1/64", heads=1 & 1/64", jacket =5/8" PTE size 10 drive with an EX proof 20 HP motor and a dry seal. 36" main cover. 18" man way with pro ring and sight glass assembly with man way assist.

Auft # 37387 belt driven by LOHER 3.6 KW, 1715 RPM, 3/7.7-13.3A/60Hz/220-380 volt motor, ex proof (T3). Designed to German TUV standards. Reglassed in Romani by UGE 2001.

• Can be equipped with Agitation System
• Reglassed KC series reactor body
• Manufacturers number 4364421
• With (4) side support lugs or (8) leg couplings for mounting/installation.

Shell rated 150/FV @ 450 degrees F. Conventional jacket 150/FV @ 450 degrees F with welded 2:1 elliptical heads Alloy mixer with dual tier agitation, lower is a CBT, upper is a PBT

• This is a bare reactor

• Type EHW-N22101/02
• Jacket diameter 1300mm

apparatus #59-2135-54 internal design pressure 20 bar @ 115 degrees C jacket 5 bar @ 152 degrees C (17 liter) straight side and bottom dish insulated and cladd with stainless steel

reactor assembly

• reactor body only

Pilot plant, including an Agilent Tech Model 7890A-GC. Designed to operate at up to 725 psig and 572 degrees F in the auxiliary process vessels and 932 degrees F in the reactor tubing. The current set up includes one 5/8" tube reactor about 3' high and holds around 70 cc of catalyst. The second reactor system has a 1" tube reactor designed to hold about 387 cc of catalyst. The skid mounted system is equipped with two independent pilot reaction systems and common utilities. The systems are designed with the capability to create three reactor inlet gas streams by Brooks Mass flow controllers. It also has the capability to flow hydrogen and an inert by the mass flowmeters where it can be mixed in with the liquid feed. Each system also has four Knock out pots located down stream of the reactor. Includes all controls.

• internal pressure 6 bar @ 200 deg C (7160ltr),
• jacket 6 bar @ 200 deg C (1135ltr)
• Certification: TUV
• Motor: 3 phase
• 380/660 volt
• 3-finger retreat curved agitator
• mechanical seal with lubricator
• Straight side:
• 1-15mm (jacket) -with (1) 1.5 sqm Schott QVF glass shell & spiral tube heat exchanger pressure: -1/0.3 bar @ 150 deg C
• Control panel: (1)

• with condensing system
• norm #22101/02 internal design pressure 6 bar@200 deg C (7160ltr), jacket 6 bar@200 deg C (1135ltr)
• Motor: 3 phase
• via a gearbox
• Norm number: 22101/02
• 1-15mm (jacket)
• Bottom - 4-50mm (jacket) condensing system consists of: (1) 100ltr Schott QVF glass vertical receiver, (1) 1 sqm Schott QVF glass shell & spiral tube heat exchanger, pressure -1/0.3 bar @ 150 deg C, pressure -1/0.3 bar @ 150 deg C, (1)100m3/hr @ 33mbar Travaini c/steel 2-stage vacuum pump with 40ltr c/steel separator tank

straight side and bottom dish internal pressure -1/6 bar @ -10/200 degrees C (3685 liter), jacket -1/20 bar @ -10/200 degrees C (75 liter) Highly polished Finish Ancillaries: Valves, filters, pipework, etc. (may be available)

• Jacket Coverage bottom dish and 7/8 of shell height.
• Motor "Foot Mounted TEFC, UL, EX Proof, 60Hz, 230/460V"
• Sheathing covering Insulation rock wool and puff , 304 SS sheathing completely sealed to 0.4 bar
• with thermowell and dip pipe
• Internal : Buff polished to 240 Grit.
• External: Buff polished to 180 Grit. Support Type: Lugs.

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

internal pressure -1/2 bar @ 50/165 degrees C jacket -1/6 bar (150 liter)

• Gearbox: Lenze gearbox
• Insulation: Straight side and bottom dish are insulated and clad with stainless steel. (2) sets of 2-bladde paddles on shaft dry running mechanical seal straight side and bottom dish are insulated and cladd with stainless steel

• Jacket Coverage bottom dish and 7/8 of shell height.
• Motor "Foot Mounted TEFC, UL, EX Proof, 60Hz, 230/460V"
• Sheathing covering Insulation rock wool and puff , 304 SS sheathing completely sealed to 0.4 bar
• With Thermowell and dip pipe
• Internal Finish: Buff Polish to 240 grit
• External finish: Buff polish to 180 Grit Support Type: Lugs.

Buss Loop hydrogenation reactor,

• Bare Body.
• Limpet Jacket has a zone on the side and one on the bottom head.

• Clamp top base reactor body-High Pressure "P" series.