Eccentric vibrating mill Type ESM Ball Mill Usable volumn is 5 liter maximum Total grinding tube volume is 19 liters, grinding medea volume is 15 liters 235 mm ID x 450 mm L. Unit is batch design, suitable for wet and dry grinding, with a feed grain size up to 30mm Can accept rods, balls, and pebble grinding media, comes with CS Rods. The Exciter is side mounted creating ellitical and linear vibrations

attritor Open top with welded cone bottom Charge is 5/16" chrome plated steel (52100) shot Operating liquid level is 185 gallons Agitation is by a two speed Reliance 25/8.3 hp, 1800/600 rpm AC motor through a Sym-Cyclo gearbox With front side door for media change Motor & drive on trolley for shaft & media changing Insulated

Underwater pelletiser system

2727 kg/hr (6000 lbs/hr)

product specific gravity 0.96 @ 25 deg C,

feed material form molten,

pellet surface moisture content nil to 0,10%

(1) Trendelkamp diverter valve, type TAV-4, serial #963620, driven by hydraulic power pack

(1) 300 sq ft 316/316L s/steel horizontal shell & tube heat exchanger, manufactured by Kenics (Chemineer), model 300-HEX-915, serial # 995893-01-01, design pressure tube side: 100 barg @ 315 deg C, shell 20 barg @ 315 deg C, jacket on heads 20 barg @ 315 deg C, (299) 12.7mm outside diameter x 2346mm long 316L tubes, single pass tube side, 324mm inside diameter 316/316L s/steel shell, tube plates are 316/316L s/steel clad, (2) 316/316L coned heads with c/steel jacket, overall length 3194mm, openings: tube side: 2-75mm, 2-50mm, shell side: 2-75mm, 1-25mm, 1-12mm, head jackets (each with) : 2-32mm, mounted on (2) fixed cradles, fully insulated and clad

(1) 3 m3/hr @ 220 deg C 316L s/steel MAAG gear pump, type Therminox TX-70/70, manufactured by MAAG pump systems, serial # 50063746, suction pressure 4 bara, discharge pressure 57-71 bara, differential pressure 57-71 bar, driven by 2-speed motor, 15 kw, 3/50/380/415/660/690 volt, 3830 rpm or 3/60/415/460 volt, 4620 rpm motor, mounted on base plate

(1) 304L s/steel Gala centrifugal pellet spin dryer with agglomerate catcher, dryer model 3016-LD, serial #981156, max product 6400 kg/hr, max water 100 kg/hr, max working temperature 80 deg C, rotor speed 780 rpm, 3-rotor screens, 2-dewatering screens, average airflow 2500 NM3/hr, easy access design, rotor is belt driven by a 2-speed motor, 5.5 kw 3/50/380/420/655/725 volt, 1440 rpm or 6.3 kw 3/60/440/480 volt, 1740 rpm, agglomerate catcher is model 9-PSG

(1) 1200mm diameter s/steel vibratory screen separator, 2-deck, model ME-48S15-6-6, manufactured by Midwestern industries inc, serial # 0399-4018, electrics 3HP, 220/380/440 volt

(1) 3420 ltr s/steel slurry base tank with 450 gpm centrifugal pump

(1) Pellet blowing/conveying unit

Control panels, pipework, filters and other ancillaries

product specific gravity 0.96 @ 25 deg C, feed material form molten, pellet surface moisture content nil to 0,10%,

system consists of:

(1) 3X 316 s/steel Black Clawson s/steel underwater pelletiser, model # 114012320, serial # 631955, internal rotary knifes, die plate with (360)

• Hammermill Disintegrator 18" diameter rotor with 32 hammers.

attritor Size 100S 30" deep tank, with 2 1/2" dia shaft, (6) cross bars. Canter lever tilt mechanism 7 1/2 HP Class I, Div II drive.

Wet Grinding Media Mill water cooled grinding chamber Batch size 200 to 1000 liter capacity closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media 50 HP motor, 3/60/230/460 volt Class1 Groupd D

conical ball belt driven by motor via bull gear Non drive end ID= approximately 470 mm, (measured at the most narrow point) Drive end ID is approximately 465 mm.

with CS heat box Cylindrical Rod Mill, with LP gas fired heating system Feed line input(liquid) 1.5" diameter pipe. Discharge port is 8" round with a 8.8" x 32" vent Drive is by a Lincoln AC motor, Model BVJ AAF4P3TC61.
3 hp, 60 Hz. 230/460 volt Drum is chain driven. Heating chamber is custom built with three firing bars with auto igniters and pilots(controlled separately). Heating system designed to fire on LP gas. Top mounted exhaust stack with automatic valve to maintain temperature is supplied

Dyno Mill bead mill 1.4 ltr grinding chamber 8-40 kg production rate weight 90 kg. 2 x clamps to remove chamber

15 liter horiz jkt (disintegrator) mill system Rotor deviding plate 1.4435. (8) agitation discs are polyurethane clad (Bayer Vulkolan). Double jkt 304SS. Shaft seal: double lip (teflon), mfd by Garlock. Milling cylinder 15 liter volume Suspension inlet 25mm, suspension outlet 25mm. Cooling medium inlet 12mm, cooling medium outlet 12mm. Max operating pressure in milling chamber 4 bar. Max operating pressure in double jkt 2 bar Mill motor: 15 KW Loher Type eA180MA-4, 3/50/500 volt, 1455 rpm Ex-e-G3 motor

• Capacity 300 kg per hour.
• 316SS (product contact), sifter, polished with mirror finish, Multi Mill ,with Bead impact knife blade. Sanitary and cGMP construction.
• 1400 mm height, 330mm diameter, 316 SS perforated screen .5 mm thick, 316SS shaft 38mm diameter x 410mm long,
• 316 SS knife (20 mm x 55 mm x 6 mm thick) frame 304 cladded, (2) 316 ss blade scrapers (20 mm x 20 mm x 50 mm), mechanical seal, w/ charging hopper.
• Hindustan Motor: 2.2KW 3/60/220 w/ VFD Bolted to base plate with caster wheels (4)

650 deg F. 2"-6" CS ball charge Gear driven by 40 HP, 3/60/220/440 volt, Phila gear reducer ratio 30.6:1. Bull and pinion gear ratio 4.85:1. Unit has Manzel fully centralized lubrication system w/6-station Manzel oil pump. W/control panel and starter box.

4-station Premier type small-media sandmill system. Consists of (4) 6 1/2" ID x 12" 304SS closed head horiz chambers mtd on common unit. Each chamber has rotary gear pump mtd underneath. W/controls and gauges.

Hammers belt Inlet dimensions with O.R.C. Cover 12" x 10.75". Discharge chute 16" x 22.5"

Reitz "Disinigretor" Hammer mill Blades are 12" long with a 2.5" deep product chamber

Dyno-bead mill 3x500 volt

coBall mill This production size stirrer-bead mill is designed for the finest grinding of suspensions and high viscous products down to Nano- Range. This mill has the following specifications: Throughput; 0.7-2.2 gpm, Pressure resistance; 58 psi, Grinding chamber volume; 2 Gallons, Rotor driving capacity; 49-73 hp, weight 3850 lbs.
Controls are 110 volt, Machine 460 volt. Air humidity from 0-80%, Ambient air; As dust free as possible. Mechanical seal on grinding chamber

barrel internal chrome plated horizontal jacketed pearl mill mechanical seal (10) 260mm diameter blades on shaft hinged front cover, built on controls, chamber on rollers for cleaning/maintenance,

Mikro Pulverizer hammer mill Reliance duty master AC motor rated for 3520 rpm, drives the mill with 6 sets of swing hammers, of the forged stirrup type Chamber has a removable cover for cleaning and maintenance. Chamber is fed with a screw type feeder, powered by a Reliance Duty Master ac motor rated for 0.25 hp at 1725 rpm through a Dodge reducer. With explosion proof motors and controls

attritor Open top with welded cone bottom. Charge is 5/16" chrome plated steel (52100) shot. Operating liquid level is 185 gallons. Agitation is by a two speed Reliance 25/8.3 hp, 1800/600 rpm,
AC motor through a Sym-Cyclo gearbox. With front side door for media change Motor & drive on trolley for shaft & media changing. Insulated.

conical balls. Belt driven by motor via bull gear. Non drive end ID= approximately 470 mm, (measured at the most narrow point) Drive end ID is approximately 465 mm.

CS/Ni-hard lined 650 deg F. 2"-6" CS ball charge Gear driven by 40 HP, 3/60/220/440 volt thru Falk gear reducer, ratio 32.69:1. Bull and pinion gear ratio 4.85:1. Unit has Manzel fully centralized lubrication system w/6-station Manzel oil pump W/control panel and starter box.

conical ball belt driven by motor via bull gear Non drive end ID= approximately 470 mm, (measured at the most narrow point) Drive end ID is approximately 465 mm.

lower vari drive assembly Fits 100 system only.