Eccentric vibrating mill Type ESM Ball Mill Usable volumn is 5 liter maximum Total grinding tube volume is 19 liters, grinding medea volume is 15 liters 235 mm ID x 450 mm L. Unit is batch design, suitable for wet and dry grinding, with a feed grain size up to 30mm Can accept rods, balls, and pebble grinding media, comes with CS Rods. The Exciter is side mounted creating ellitical and linear vibrations

attritor Open top with welded cone bottom Charge is 5/16" chrome plated steel (52100) shot Operating liquid level is 185 gallons Agitation is by a two speed Reliance 25/8.3 hp, 1800/600 rpm AC motor through a Sym-Cyclo gearbox With front side door for media change Motor & drive on trolley for shaft & media changing Insulated

Underwater pelletiser system

2727 kg/hr (6000 lbs/hr)

product specific gravity 0.96 @ 25 deg C,

feed material form molten,

pellet surface moisture content nil to 0,10%

(1) Trendelkamp diverter valve, type TAV-4, serial #963620, driven by hydraulic power pack

(1) 300 sq ft 316/316L s/steel horizontal shell & tube heat exchanger, manufactured by Kenics (Chemineer), model 300-HEX-915, serial # 995893-01-01, design pressure tube side: 100 barg @ 315 deg C, shell 20 barg @ 315 deg C, jacket on heads 20 barg @ 315 deg C, (299) 12.7mm outside diameter x 2346mm long 316L tubes, single pass tube side, 324mm inside diameter 316/316L s/steel shell, tube plates are 316/316L s/steel clad, (2) 316/316L coned heads with c/steel jacket, overall length 3194mm, openings: tube side: 2-75mm, 2-50mm, shell side: 2-75mm, 1-25mm, 1-12mm, head jackets (each with) : 2-32mm, mounted on (2) fixed cradles, fully insulated and clad

(1) 3 m3/hr @ 220 deg C 316L s/steel MAAG gear pump, type Therminox TX-70/70, manufactured by MAAG pump systems, serial # 50063746, suction pressure 4 bara, discharge pressure 57-71 bara, differential pressure 57-71 bar, driven by 2-speed motor, 15 kw, 3/50/380/415/660/690 volt, 3830 rpm or 3/60/415/460 volt, 4620 rpm motor, mounted on base plate

(1) 304L s/steel Gala centrifugal pellet spin dryer with agglomerate catcher, dryer model 3016-LD, serial #981156, max product 6400 kg/hr, max water 100 kg/hr, max working temperature 80 deg C, rotor speed 780 rpm, 3-rotor screens, 2-dewatering screens, average airflow 2500 NM3/hr, easy access design, rotor is belt driven by a 2-speed motor, 5.5 kw 3/50/380/420/655/725 volt, 1440 rpm or 6.3 kw 3/60/440/480 volt, 1740 rpm, agglomerate catcher is model 9-PSG

(1) 1200mm diameter s/steel vibratory screen separator, 2-deck, model ME-48S15-6-6, manufactured by Midwestern industries inc, serial # 0399-4018, electrics 3HP, 220/380/440 volt

(1) 3420 ltr s/steel slurry base tank with 450 gpm centrifugal pump

(1) Pellet blowing/conveying unit

Control panels, pipework, filters and other ancillaries

product specific gravity 0.96 @ 25 deg C, feed material form molten, pellet surface moisture content nil to 0,10%,

system consists of:

(1) 3X 316 s/steel Black Clawson s/steel underwater pelletiser, model # 114012320, serial # 631955, internal rotary knifes, die plate with (360)

• Hammermill Disintegrator 18" diameter rotor with 32 hammers.

attritor Size 100S 30" deep tank, with 2 1/2" dia shaft, (6) cross bars. Canter lever tilt mechanism 7 1/2 HP Class I, Div II drive.

Wet Grinding Media Mill water cooled grinding chamber Batch size 200 to 1000 liter capacity closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media 50 HP motor, 3/60/230/460 volt Class1 Groupd D

• Capacity 300 kg per hour.
• 316SS (product contact), sifter, polished with mirror finish, Multi Mill ,with Bead impact knife blade. Sanitary and cGMP construction.
• 1400 mm height, 330mm diameter, 316 SS perforated screen .5 mm thick, 316SS shaft 38mm diameter x 410mm long,
• 316 SS knife (20 mm x 55 mm x 6 mm thick) frame 304 cladded, (2) 316 ss blade scrapers (20 mm x 20 mm x 50 mm), mechanical seal, w/ charging hopper.
• Hindustan Motor: 2.2KW 3/60/220 w/ VFD Bolted to base plate with caster wheels (4)

Mikro Pulverizer hammer mill Reliance duty master AC motor rated for 3520 rpm, drives the mill with 6 sets of swing hammers, of the forged stirrup type Chamber has a removable cover for cleaning and maintenance. Chamber is fed with a screw type feeder, powered by a Reliance Duty Master ac motor rated for 0.25 hp at 1725 rpm through a Dodge reducer. With explosion proof motors and controls

Intermittent type Attritor Szegvari Attritor System Size 1S Bench top size, with a Reeves Vari -drive rated for 276 through 2000 rpm Mixing shaft belt driven chrome plated mixing pot for 0.8 gallons working capacity with jacket for cooling or heating This mixer is designed for media size of 1/8” through 3/8” Hardened 304 SS tool steel mixing shaft Standard mixing arm pinned to shaft which means this machine is designed for ease of shaft or arm change Multiple options for mixing shafts, types of mixing chambers, lids, etc

with CS heat box Cylindrical Rod Mill, with LP gas fired heating system Feed line input(liquid) 1.5" diameter pipe. Discharge port is 8" round with a 8.8" x 32" vent Drive is by a Lincoln AC motor, Model BVJ AAF4P3TC61.
3 hp, 60 Hz. 230/460 volt Drum is chain driven. Heating chamber is custom built with three firing bars with auto igniters and pilots(controlled separately). Heating system designed to fire on LP gas. Top mounted exhaust stack with automatic valve to maintain temperature is supplied

coBall mill This production size stirrer-bead mill is designed for the finest grinding of suspensions and high viscous products down to Nano- Range. This mill has the following specifications: Throughput; 0.7-2.2 gpm, Pressure resistance; 58 psi, Grinding chamber volume; 2 Gallons, Rotor driving capacity; 49-73 hp, weight 3850 lbs.
Controls are 110 volt, Machine 460 volt. Air humidity from 0-80%, Ambient air; As dust free as possible. Mechanical seal on grinding chamber

lower vari drive assembly Fits 100 system only.

Wet Grinding media mill water cooled grinding chamber Batch size 50 to 250 liter capacity closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media

This lab size stirrer-bead mill is designed for the finest grinding of suspensions and high viscous products down to Nano- Range This mill has the following specifications: Throughput; 0.044-0.132 gpm, Pressure resistance;29 psi, Grinding chamber volume; 0.13 Gallons,
Rotor driving capacity; 4 hp, weight 353 lbs.
Controls are 110volt, Machine 460 volt.
Operating conditions: Temperature; from 0-90 degrees C. Air humidity from 0-80%, Ambient air; As dust free as possible. Mechanical seal on grinding chamber

bead mill Type 574-04-21, Order #201869. Full load 14.7 amp. Currently set up as a disk agitator, but can also be used with a peg agitator.
Nylon coated concentric disc arrangement; nylon coated SS shaft. Has water cooled chamber w/1 HP Viking CS rotary pump Polished grinding chamber 6" dia x 18" long. On board explosion proof controls

Mikro Bantam hammer and screen mill. Six forged stirrup style hammers.
Lab size with a Reliance AC motor rated for 1725 rpm driven through a Dodge Gearmaster XL speed increaser. Portable, cart mounted on dollies for easy movement. On board control panel with explosion proof motors and controls.

Rebuilt 70MM mechanical seal Part #630597U, Ref. assembly #638208, Ref. dwg #C-2121191X.
Rebuilt by Netzsch May 2008.

Rebuilt 80MM mechanical seal Part #630598U, Ref. assembly #639183, Ref. dwg. # C-2115381X. Rebuilt by Netzsch June 2008.

Rebuilt 80MM mechanical seal Part #630598U, Ref. assembly #630971, Ref. dwg. #C-2115381X. Rebuilt by Netzsch July 2008.

Rebuilt 70MM mechanical seal Part #630597U, Ref. assembly #638208, Ref. dwg. # C-2121191X. Rebuilt by Netzsch May 2007.

Rebuilt 70MM mechanical seal Part #630597U Ref. assembly #638208, Ref. dwg #C-2121191X. Rebuilt by Netzsch May 2008.

Plastic Lined Pilot Plant Ball mill / bead mill Water jacket on the outside of the shell, the inside of the grinding chamber is completely lined with hard plastic coating. will hold 170 kilograms of beads(media no included). Charging cover seal: has a Viton Rubber 7mm seal. Discharge cover size 3mm. The shell is enclosed in a safety cage. With mill is a Skid with the mill drive system and a control panel with a volt meter, amp meter, inverter, on/off switch, timer, timer reset, and jog button.

Dyno Mill bead mill 1.4 ltr grinding chamber 8-40 kg production rate weight 90 kg. 2 x clamps to remove chamber