wetted parts,and all Body parts 316 SS otary air Lock assembly, with hinged side access. 10" diameter straight through design. @" deeep recessed vanes (7) total. With mechanical seal on driven shaft end. Opposite end has hinged acess door for easy cleaning and removal of valve.

16-1 hp, 256-1765 rpm, 213TC frame. Motor drives chain through a Cyclo gear drive. Diameter of valve flange is 16". Flange face to face is 20"

screw feeder with hopper 1.5 HP, 6.63:1 drive reducer, 30:18 pulley ratio, 158 rpm screw speed, belt driven, 360mm wide x 500mm deep x 370mm long trough with lump braker rotor, 4-chopper blades on rotor, driven by 3/4 HP, 3/50/115/230 volt, 1725 rpm motor, 200:1 reducer, 8.6 rpm rotor speed, 304 stainless steel feed hopper, square bottom with round top, 370mm wide x 370mm long x 570mm high, top 600mm diameter, bolt flat top,

skid with SS tank feed pump and 1/2 " diameter flexible feed hose open top with 8" cone bottom with the tank outlet piped inot the intake fo a Grundfos SS pump 13 gpm @ 190 TDH Pump and tank is mounted on a skid with Speer control box with Start/Stop buttons, fisher Porter Flow control meter, and misc. flexible hose

• Portable vertical tank
• Discharge mechanism: Motorized screw conveyor
• Bolted flat top, coned flat bottom

Accurate Dry Feeder Tuf-Flex volumetric series 600 with Vinyl Flex hopper 18" ID x 18" ID x 12" deep with a 48" long 304SS tube Unit has (2) 1/4 HP Pacific Scientific Motors, 1800 RPM, 90 DC volts One moter controls feed rate, second motor for hopper agitation. Mounted on a portable cart with wheels, Power cord and plug. Agitation and Feed rate control boxes mounted under the feeder All electricals are Class I Group D enclosures 28" wide (without screw)

Feeder to Briquetter Style 4N960.2921

volumetric feeder 10 amp. With SS hopper Mounted on a stand with wheels. ontrols for Stop & Start filling cycle, fill quanity with precision counter that controls the amount of product dispensed and the batch size.The speed of the auger is regulated by a seperate control.

Twin screw Feed conveyor for a porcupine processor Inlet size is 48" x 30" Triple chain drive sprocket.(No motor or gearbox)

driven by 2-speed motor, 0.75 kw, 3/50/380-420/220-240 volt, 1400 rpm or 0.90 kw, 3/60/440-480/250-280 volt, 1690 rpm, hopper chamber also has lump breaker, shaft driven by same motor as the screw, openings top 1-300 mm (feed), 1-200mm (with bursting disc),

with drive motor and gearbox.

rotary feeder valve. 16.17 rpm. Chain and sprocket driven. Has packing gland. Has Dazig speed switch.

twin screw feed with screw conveyor. Feed bin is 48" x 48" with twin screws discharging into a 10" diameter X 8' long screw conveyor. Leason 3/4HP motors and reducers, conveyor driven by approximately 10 HP motor. Designed for feed rates of 0.58 to 3400 cu.ft./hour.Designed for 48" round inlet hopper(not Included), discharge into 14" round opening.