• Side bottom discharge with automatic valve Agitator Cored for Heating/Cooling: Yes. Vessel Liquid Capacity: 400 gallons.

Alloy C22

Internal finish is a sanitary polish. 304SS sheathing. 304 stainless steel

18.35" Side discharge with discharge valve, 132 gallon Hastelloy C 22 side discharge valve. National Board # 287. rated FV/88 @392 degrees F.

Dryer Dimensions: 90" diameter x 76" length

hydraulic skid. Includes: integral Stock # 241013- Hastelloy C22 pulse jet Dust collector. 8.6" handhole, 4.33" site glass.

500 Gallon Manufactured by Alloy Fab for Dartco Shell is .250" thick Top head is .312" thick Cone is .312/.437" thick jacket is .109" thick6.5 turns half pipe on top head18 turns half pipe on straight side5 turns half pipe bottom head All half pipe jacket is 2"

mobile laboratory filter/dryer with tilting mechanism, design pressure internal 1 bar + full vacuum @ -20/150 degrees C, jacket: 6 bar + full vacuum @ -20/150 degrees C, all wetted parts are Hastelloy C22, 50 liter slurry capacity, 20 liter cake capacity, 350mm diameter x 680mm straight side, 6-30rpm shaft speed, agitator driven by 1.5kW, 3/50/230/400 volt, 1420 rpm CE ATEX EExd IIB T4 IP55 motor, hydraulic driven agitator raise/lower mechanism with powerpack, alloy 22 bellows on shaft, flat bottom filter plate with mesh filter and can be rotated for cleaning, manual vessel tilt mechanism, strip sight glass on side for measuring cake depth, approx 100mm side discharge which is fully contained in a glovebox, all mounted on stainless steel frame with wheels for full mobility, design code ASME VIII DIV 1 (1998) + A '00'

Funda filter with centrifugal discharge Shell 900mm diameter x 960mm from flanged top to bottom discharge (22) 800mm diameter filter elements @ 30mm spacing Requires 15 PS motor Wet cake discharge

Manufactured by Durco Enzinger Vertical tank horizontal Plate design, with wet cake discharge, with Slucing bar SS bolt on plate coil jacket on bottom head with bolted dished bottom with swing bolts Mounted on top is a faractioanl HP drive that turns the slucing bar that rund down the middel of the plate stack 6" diameter bottom cake discharge

Certified by Votator Corp horizontal plate design thru Falk gearbox, input 1750, ratio 6.246:1, output 290 Shell is 0.375 " thick head is 0.375" thick, head is 0.500" thick

Horizontal plate design Centrifugal discharge driven by 40 HP, 3/60/230/460 volt, 1775 rpm motor thru Falk gearbox input 1750, ratio 6.246:1, output 290

Shell rated 88.5/FV psi @392 Deg F. Jacket 316SS, rated 152.5/FV @392 Deg F Vertical Filter Dryer Dust collector Jacket rated FV 152 @392degrees F. Internal finish is a sanitary polish. 304SS sheathing Mechanical seals. Cored shaft with . Side discharge with side discharge valve. ntergal Stock # 241129- Hastelloy C22 pulse jet Dust collector. Dryer Dimensions: 90" diameter x 76" length 132 gallon Hastelloy C 22 side discharge valve. rated FV/88 @392 degrees F

Agitated jacketed Rosenmund filter dryer Batch size 20 to 25kg internal design pressure 0.39 MPa (3.9 bar) + vacuum @ -20/170 degrees C (120 liter) coil jackets 0.6 MPa (6 bar) @ -20/170 degrees C (10 liter) internal working pressure 0.15 MPa (1.5 bar) @ 100 degrees C jacket 0.6 MPa (6 bar) @ 100 degrees C 550mm diameter x 828mm from agitator opening to filter plate, chamber insulated and with 316L stainless steel cladding, side discharge with 316L stainless steel glove box Ex motor, filter plate has a raise/lower and a hydraulic lock mechanism driven by the same power pack, CE certified, unit also includes (1) stainless steel condenser, (1) stainless steel tank, (1) heating controller

pressure filter

• With Hydraulic head lift, counterbore support plate, 7 baskets

• Certified by Chaudronnerie Des Roches (France).
• Jacketed on straight side only.
• EX Proof Controls
• AC drive motor on hydraulic unit for moving the agitator shaft up and down: Reliance Duty Master AC. 1.5 HP, 1155 rpm Frame 182TD, UL listed3 phase 60 Hz, 230/460 v. Direct mounted to the top of the hydraulic tank.

Polypropylene plates and frames and all Stainless Steel skeleton. approximately38 chambers. 4 eye closed delivery, 1" inlet and outlets. Manual closure with Hydraulic Assist manufactured by SPX.

Filter interior is polished to a mirror polish (220 grit) With cored and heated shaft shaft rated for 87 psi at 208 degrees F. Hydraulic driven agitator rotation 1:14 from 6-58 rpm. With stuffing box agitator seal with gas purge. Hydraulic power pack operates the following. Agitator up/down, Bottom opening tilting and the hatch Power pack is driven by a Reliance 10 hp 460volt, 3 ph motor Side solids discharge lamped bottom for heads removal Tilting type filter With 316 SS base and cabinet exterior parts polished to an 80 grit finish All gaskets are PTFE. Filter has washing nozzles, and Explosion proof lighting for filter interior Also included is a Rosenmund Apovac Vacuum system including vacuum pump and ring -Liquid vessel and cooler Apovac model 1.5/660 PMSH 156 D2 Serial # 51 050 with Vacuum pump by Gepruft With PLC control system has operators controls mounted on hydraulic station

filter press with Polypropylene plates and frames and all Stainless Steel skeleton. 95 plates with 44 chambers 4 eye closed delivery, 1" inlet and outlet. Manual closure with Hydraulic Assist manufactured by SPX.

Job #1S-271 Polypropylene drum, trough and rocker agit Advancing knife discharge Mdl PSP-45, driven by 3 HP, 3/60/230/460 volt, 1730 rpm TEFC motor (1) 1/2 HP SS centrifugal pump; (1) 5 KVA transformer; controls and starter box; (1) 8" x 16" plastic tank

Centrifugal discharge pressure leaf filter

• Vessel number: 5062GW
• Vessel volume: 2000 ltr (1) end head plate, (104) approx 1.2m diameter x 1.5mm straight side vertical chamber associated equipment includes, 1 x 1800 ltr 321. stainless steel vertical pressure tank, 0.5 bar @ 20° C, weld dished top and bottom, 1 x approx. 268 ltr stainless steel vertical aggitated tank, (1) auma (system Lewa) pump system type: EHV-L, serial#328114-010.004 (3) electrical panels

polishing plate filter press hydraulic press mechanism driven by hydraulic powerpac which is built into a control cabinet 2 -80mm openings on plates, Stainless Steel skeleton includes (1) Photometer, manufactured by Sigrist, s/steel walkway platform with steps and handrail

Four lots assorted filter media for polishing press', 15" x 15" and 16" x 16". see IPP stock numbers below. Lot numbers 804, 805, 806, & 807. Media by Ertel Grade 175 P, Die #26 Lot # 34062. Media by Millipore MSTK, 35DN die # 414 Millipore Item # L30DN 4140.

Polypropylene plates and frames and all Stainless Steel skeleton. 44 chambers. 4 eye closed delivery, 1" inlet and outlet. Manual closure with Hydraulic Assist manufactured by SPX.

Cake Discharge: Dry, suitable for direct or pre-coat filtration Number of Filter Screens: 22 445 gallon 20 HP 3/60/230/460 volt Additional Features: Includes a spare filter plate pack.

(30) chambers, 5 eye, closed delivery.

Operating pressure 7/15 bar. 4 eye, With red and blue button plates for washing.

rubber/polypropylene membrane recessed plate filter press 1295mm x 1295mm x 25mm deep recess With exchangeable soft rubber squeezing membrane 4 1/2" center bottom feed 4-corner discharge 1/2" outlet on each plate. Squeeze mechanism with double acting hydraulic cylinder. Complete with hydraulic powerpak driven by 3 KW, 3/60/220/380 volt, 1410 rpm motor. Unit with chain driven plate shifter for separation, driven by 1 HP, 3/50/220/380 volt, 21.5 rpm geared motor.