UNUSED

Internal finish 240 grit buff polished-Bright polished, external buff polish to a matte finish. ASME NB rated, and "U" stamped.

welded dish heads (2:1) 12 mm thick

Coil: 114 mm OD x 4 mm thick,

Limpet covers bottom dish and 2615 mm of straight side (pitch 150mm). Coil heating surface area.

With Insulation rings and upper drip ring. Two top lifting lugs and one tailing lug.

20" Manhole with Cover and davit arm assist, one 6" sight glass, Support Type: Lugs.

6,300 liter order number 60669 Pressure ratings: Internal -1/6 Bar @ -25/+200°C total volume 8,190 liters; Jacket rated -1/6 Bar @ -25/+200°C total volume 795 liters. Lined with glass WWG9115 With a top mounted drive with Burgmann mechanical seal type M462L-D20 and Burgmann Thermosyphon TS 2000 pneumatic bottom outlet valve, and solids dosing device,

Shell rated 150/FV @ 450 degrees F. Conventional jacket 150/FV @ 450 degrees F with welded 2:1 elliptical heads Alloy mixer with dual tier agitation, lower is a CBT, upper is a PBT

• This is a bare reactor

jacketed high pressure reactor Jacket volume: 1700 liter Total length: 8000 mm Jacket wall thickness: 30 mm

• Rated for lethal service.
• Nozzles with Inconel 625 inlay.
• Glasslined beavertail baffle with WIKA TR-10 & PT100 temperature probes.
• Mechanically sealed agitator: FlowServe MD-200 DN140.
• See sales comments for additional options.

MFR # 12269 Model SA-3000 Special three top lifting lugs, six leg couplings, four side wall lugs Shell=1 & 1/64", heads=1 & 1/64", jacket =5/8" PTE size 10 drive with an EX proof 20 HP motor and a dry seal. 36" main cover. 18" man way with pro ring and sight glass assembly with man way assist.

Auft # 37387 belt driven by LOHER 3.6 KW, 1715 RPM, 3/7.7-13.3A/60Hz/220-380 volt motor, ex proof (T3). Designed to German TUV standards. Reglassed in Romani by UGE 2001.

• Can be equipped with Agitation System
• Reglassed KC series reactor body
• Manufacturers number 4364421
• With (4) side support lugs or (8) leg couplings for mounting/installation.

Drive Motor is CE certified

1.4529 SS (AL-6XN super-Austenitic SS) fermenter/ reactor with internal cooling coil and sparge ring for gas addition Polished stainless steel interior motor : 3/50/380 volt Bergmann double mechanical seal on shaft

• TUV standard
• Jacket volume: 440 liter Vertical Internal cooling coils rated 13 liter rated -1/6bar@200 degrees C
• Sparge ring in bottom of tank for adding gas into the fermentation process
• Empty weight: 2450 Kg
• Shipping dimensions: Length= 4100 mm; Width= 1800 mm; Height= 1800 mm; Weight= 2450 kg

• This is a base Reactor

316 Ti ss internal pressure 6 bar @160 degrees C jacket 6 bar @ 160 degrees C (total volume 59 liter)

Three turns schedule 10 half pipe on bottom head, Eight turns schedule 10 half pipe on side walls. Mixing by Eastern model FRG-C2M with double mechanical seal Duel sets of four blade pitch turbine mixers

Motor 3~/50Hz/380V

Siegen Fabr. No 4867501 without electrical motor.

agitated, jacketed, reactor. rated atmos internal; SS dimple Jacket covers bottom half of tank and bottom head. Top mounted right angle down agitator drive, direct coupled to a 7.5 HP motor. Reinforcing ring around middle of tank with (4) lugs and legs attached ot the mounting ring.

NEW/UNUSED Internal finish 240 grit buff polished-Bright polished, external buff polish to a matte finish "U" stamped 10 mm thick welded dish heads (2:1) 12 mm thick Coil: 114 mm OD x 4 mm thick Limpet covers bottom dish and 2615 mm of straight side (pitch 150mm) Coil heating surface area With Insulation rings and upper drip ring. Two top lifting lugs and one tailing lug motor UL listed All nozzles have 304 SS flanges Support Type: Lugs.

• Internal Finish 240 Grit Buff Polished
• With drip ring and Insulation support
• Two lifting lugs, two tailing lugs.
• Can be mounted with legs or lugs Support Type: Legs.

• Complete assembly
• Series: RA15 HP flange mount motor

straight side and bottom dish internal pressure -1/6 bar @ -10/200 degrees C (3685 liter), jacket -1/20 bar @ -10/200 degrees C (75 liter) Highly polished Finish Ancillaries: Valves, filters, pipework, etc. (may be available)

internal pressure -1/6 bar @ -30/150 degrees C (3643 liter), jacket -1/10 bar @ -30/150 degrees C (120 liter) straight side and bottom dish CE 0036 certified, TUV certified Mounting ring Fully insulated

direct coupled Body with electrical heated jacket and full insulation with stainless steel clad jacket motor : 3/210 volt

Ekato type EM100, 23/113 rpm agitator drive, mechanical seal with lubricator, TUV certified