2-chamber bowl clarifier centrifuge. Complete with bowl, parts and tools in separate crate.

frame with out bowl. Clarifier (2-phase) design IP55 motor Cast iron frame w/brake, oil level sight glass and revolution indicator for bowl speed check. Drive by standard flange mount motor. Power transmitted via centrifugal friction clutch and worm gear to the bowl spindle. All bearings and the gear splash lubricated from central oil bath. Pressure discharge of the clarified liquid by built-in centrifugal pump.

2-chamber bowl centrifuge Clarifier (2-phase) design Bowl 533mm dia

self cleaning disc separator Clarifier design (liquid/solid separation) rated 1.0 kg/cm2 heavy phase With 120 volt electronic timing, air/water control box feed valve, light and heavy phase discharge valves

Clarifier (two phase) centrifuge with paring disc discharge of liquid phase self cleaning discharge of solids. Gas tight design of neck bearing bridge Rising channels on the outside edge of disc's (scalloped disc's) Rated for specific gravity of 1.0 on heavy phase, and 1.2 specific gravity of separated solids

disc bowl clarifier (2-phase) centrifuge SS bowl, 316SS housing. Manual and tools.

self cleaning disc separator Clarifier design (liquid/solid separation) rated 1.0 kg/cm2 heavy phase With 120 volt electronic timing, air/water control box, feed valve light and heavy phase discharge valves.

solid disc bowl centrifuge, 2-chamber bowl clarifier centrifuge, Max SG solids: 1.5. Openings: 3-50mm, 1-30mm. Complete with spare parts, tools, etc in separate crate.

nozzle bowl disc stack centrifuge Clarifier design, with centrifugal pump for liquid discharge Nozzle continuous discharge of solids Horizontal flange type motor with clutch

Clarifier (2-phase) Auto desludging disc bowl centrifuge with centripetal pump (paring disc) discharge of the liquid phase Scalloped disc (holes to outside edge of disc's) Self cleaning discharge of the solid phase Rated for 1.1 kg/dm3 of heavy liquid 1.5 kg/dm3 of the solids No motor.

separator disc centrifuge with self-cleaning bowl Light phase liquid discharge by centripetal pump, heavy phase liquid discharge by regulating ring, timed discharge of solids. Can be set up for purification or clarification. Rising channels to the outside edge of disc's (scalloped) 1,0 kg/dm3 heavy phase liquid 1,4 kg/dm3 solids. bowl sludge capacity 4.2 dm3 Driven by a flange mounted motor 50Hz/60Hz, 1455/1745 RPM, 8.5 kW Frame Serial #1663 449. Bowl Serial #1665 441 oil separator plant equipped with controls, pre-strainer, oil pre-heater, water pre-heater, switches, pipe lines. Tools and manual for separator

disc bowl Clarifier (2-phase) centrifuge with paring disc discharge of liquid phase Rising channels on outside edge of disc's (Scalloped disc's) Frame assembly serial #1624-930. Bowl assembly serial #16290-520 220/440 volt UL label.

Pharma grade GMP sanitary construction

Designed for Biotech cell harvesting

Rated 5 gpm on Pharma broth

with a Broom Motors LTD

Also includes a 1 m2 plate and frame heat exchanger manufactured by Sondex, rated for 10 kp/cm2 at 150 degrees C

solids retaining disc bowl centrifuge Material of bowl is s/steel 2205 Purifier (3-phase) design Paring disc on both light and heavy phase.

disc bowl centrifuge. Separator (3-phase) design. Special design for glucose separation Cast iron frame w/brake, oil level sight glass and revolution indicator for bowl speed check Drive by standard flange mount motor. Power transmission to bowl spindle via centrifugal friction clutch and worm gear. All bearings and the gears splash lubricated from a central oil bath. Pressure discharge of the heavy phase via built-in centripetal pump and gravity discharge of the light phase.

centrifuge motor and housing only, no bowl available. 3-phase separator, light phase discharged under pressure by means of paring disc, heavy phase gravity discharge

Separator (3-phase) design Cast iron frame w/brake, oil level sight glass and revolution indicator for bowl speed check. Drive by standard flange mount motor. Power transmission to bowl spindle via centrifugal friction clutch and worm gear. All bearings and the gears splash lubricated from central oil bath. Pressure discharge of the heavy phase via built-in centripetal pump and gravity discharge of the light phase.

disk bowl separator system, solids 1.3 kg.dm3, heavy solid 1 kg/dm3

(1) 450 liter 316Ti stainless steel vertical tank, manufactured by Hinke, fabrik #8784, pressure -0.3/+0.49 bar @ -0/+90 degrees C (450 liter), weld flat top and bottom, mounted on legs, (1) 3.5/5/12 m3/hr @ 51/50/47m head 316 stainless steel centrifugal pump, manufactured by Dickow Pumpen, type NMBh 26/210, fabrik #9716261, 2900 rpm, 4.1/3.3/4.1kw, driven by 2.5kw, 3/50/380/660 volt, 2840 rpm motor mounted on a baseplate

The separator is equipped with a self-cleaning disc-type bowl. The product flows into the bowl through inlet and is separated in disk stack into a light and a heavy liquid phase with simultaneous removal of the solids which collect in the sediment holding space. The light liquid phase flows towards the center and is discharged foam-free and under pressure by centripetal pump through outlet. The heavy liquid phase flows to the periphery and is discharged under pressure by centripetal pump through outlet. The separated gums and solids collect in sediment holding space and are instantaneously ejected through ports at pre-set intervals by lowering the sliding piston. Closing water drains via the bowl valve. The ejection cycles are initiated by a control unit

rebuilt disc bowl self cleaning solids 1.25 kg/dm3, heavy solid 1.1 kg/dm3, The product flows into the bowl through inlet and is separated in disk stack into a light and a heavy liquid phase with simultaneous removal of the solids which collect in the sediment holding space. The light liquid phase flows towards the center and is discharged foam-free and under pressure by centrifugal pump through outlet. The heavy liquid phase flows to the periphery and is discharged under pressure by centrifugal pump through outlet. The separated gums and solids collect in sediment holding space and are instantaneously ejected through ports at pre-set intervals by lowering the sliding piston. Closing water drains via the bowl valve. The ejection cycles are initiated by a control unit

Frame SN 1647477, bowl SN 1641173 Has tools, controls and manuals.

nozzle disc centrifuge machine #1671-563 1.2 kg/dm3 solids bowl #3230-6645-010 (563) Driven by Loher EX motor via V-belt assembly with hydraulic powerpak driven by 1.5 KW, 3/50/500 volt motor Stand for cone assembly.

329 stainless steel bowl And 316 stainless steel Clarifier centrifuge with intermittent solids discharge

disc nozzle centrifuge Internal nozzles with paring device Used for 10 yrs for yeast production Tachometer 1420-1500 rpm

With internal nozzles and paring device Used for 10 yrs for yeast production. Tachometer 1420-1500 rpm Speed counter 118-125 rpm Driven by 45 KW, 3/50/380 volt, 1470 rpm motor Openings: top 1-2" (50mm), 1-1" (25mm); btm 1-6 1/2" (164mm)

motor enclosed in SS sanitary housing. Rated 10000-12500 litre/hr milk Hood material of construction 1.4541 (321SS). Ken #34016001, ELN #13352210, Reg #170