Fire pump Direct Driven by John Deere Diesel engine, with controller and fuel tank.

• Ft./hd. (feet of head)

diesel centrifugal firewater pump system system consists of:(1) skid mounted 625 GPM (2837 ltr/min) @ 230 ft head Mather & Platt c/steel centrifugal pump, size 5"/6" CMBB, serial #690603/1, 2000 rpm, packed gland on shaft, driven by a Leyland diesel engine, unit # CPU-3836, type PU401/21/3, engine # 911288, type UE401/113/3, tappet clearance 020" cold, injection 26 deg before top dead center, firing order 153624, exhaust with a silencer,(1) electric driven back up pump, 625 GPM (2837 ltr/min) @ 230 ft head Mather & Platt c/steel centrifugal pump, size 5"/6" E-NE-B, serial # 690602/1, 3000 rpm, packed gland on shaft, direct driven by 60 hp, 3/50/380/420 volt, 2940 rpm motor,(1) Jockey pump with gauges and valves(1) control panel

This Aquadyne 3300DST is a robust, mobile, Detroit Diesel-powered reciprocating pump built to deliver very high pressure (up to 10,000 psi) at 45 GPM. Its design makes it well-suited for clean-in-place (CIP) operations—such as high-pressure tank washing—where reliability and performance are critical. This system includes a tank pressure washing module for installation on manways to perform CIP operations.

3-step Membrane dosing/metering pump with vent screw on each pump head 1.4571 pulsation absorber 0,5 l, G 3/8’’, Element A: 1100 l/h @ max 10.5 bar Element B and C: 550 l/h @ 4.2 bar

3/50/400/690 volt,

• Volume: 1.500 cm³/rpm
• Tooth wheel pump without motor and gear box,
• order # 40/4357, against pressure max. 300 bar.

1.5 m3/hour at 150 bar 24-64 lift/minute,

2000 to 5000 cubic meter per hour triple head diaphragm pump working pressure 80 bar, max permissible working pressure 100 bar @ -196 degrees C driven by a 2-speed motor 52kw, 3/60/440/480 volt, 1770 rpm motor via a Lenze type 12.602.32.15 (5) 321 stainless steel valves,

25 Ra electropolished internal finish with a silicon carbide double mechanical seal. Viton is the elastomer material.

8" x 6" impellor. Vert split, end suction, top discharge. No motor. takes 900 HP, 3600 rpm motor. 4000 Volts.

wet end size 6 x 8-15 With a mechanical seal on the 316SS shaft The pump gear box is flood oil lubricated The suction flange is 8” ANSI 150#, and the discharge flange is 6” ANSI 150#Wet section only no driver.

316 stainless steel Peroni piston pump (5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 3~/50Hz/500V/345A/1488rpm motor, Includes shell and tube cooler, and lubricating pump

Peroni piston pump (5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 rated 233 HP, 1460 /116 rpm Motor: 345A CE stamped Includes shell and tube cooler, and lubricating pump

(5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 rated 233 HP, 1460 /116 rpm Motor: 345 A CE stamped Includes shell and tube cooler, and lubricating pump

Peroni piston pump (5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 3~/50Hz/500V/345A/1488rpm motor Includes shell and tube cooler and lubricating pump

Peroni piston pump (5) 80mm diameter pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 serial#:37406 rated 233 HP, 1460 /116 rpm Motor: 345A Includes shell and tube cooler, and lubricating pump

160-200m³/h 100mm top and 125mm end openings

1660 TDH Duplex Stainless Steel (A743- 13cr4ni) 7 Stage NEMA Nom Efficiency rated for 95.8% Set up for long term storage both in the vertical position

double mechanical seal type Crane T-109/T109 with lubricator Motor type: MQUF160L6, ExeG3 openings: (2) DN150

160-200m³/h 100mm top and 125mm end opoenings no motor

flow rate: 160-200m³/h jacketed centrifugal pump 100mm top and 125mm end openings

direct driven by 2-speed motor 37kw, 3/50/1470 rpm

direct driven by 2-speed motor 15kw, 3/50/380/660 volt, 1460 rpm

Air Operated Double Diaphragm pump without motor.