3 phase, 50Hz, 400 volt, 11kW, temperature upto 100 degrees C, can be used with 4 x 200 liter drums on 1 pallet or 1 x 1000 liter IBC, stainless steel hinged single front door, (1) internal circulation fan, driven by 0.75kW, 3/50/230-400 volt, 2760 rpm motor, built on controls,

Missing 4 pans

NFPA class A drum warming oven. designed for BOC Anhydride and acetic acid Purge time 10 minutes input 124,000BTUH at 75 psi Complete with fire protection and controls.

MDMT -20 degrees F at 50 psi where seven are usable Tray dimensions are 24" wide x 37" deep x 2.5" high. Total tray capacity is 9 cubic foot The chamber door has two 9" sight glasses

steam heated vacuum shelf dryer shelves @ 3" spacing With 22 304SS tray 18" wide x 35" long x 2" deep

3 phase, 50Hz, 400 volt, 11kW, temperature upto 100 degrees C, can be used with 4 x 200 liter drums on 1 pallet or 1 x 1000 liter IBC, stainless steel hinged single front door, (1) internal circulation fan, driven by 0.75kW, 3/50/230-400 volt, 2760 rpm motor, built on controls,

• See parts tab 245566.01--Vacuum pump skid, with a 304 SS Kinney Liquid ring vacuum pump Model KLRC-100, KC53 PN # 9-03484, serial # 100230401-1, rated for 139 CFM, 1,5" inlets & outlets, Direct driven by a Baldor 7.5 HP AC motor rated for Hazardous Locations. No. A-168221, 230/460- 60Hz. UL Listed.

vacuum oven. operating vacuum 0.667 mbar heating rated 18 KW nominal, vacuum pump 0.75 KW 3/50/415 volt Drying chamber 610mm diameter x 1065mm deep Drying chamber heated by electric elements spaced equally on exterior of chamber Unit with (4) Busch single stage rotary vane vacuum pump. Model R-5. Built-on controls consisting of: start/stop button for heating and vacuum pump, temperature controller, temperature safety trip, pressure gauge. Unit fully enclosed in cabinet.

operating vacuum 0.667 mbar heating rated 18 KW nominal, vacuum pump 0.75 KW 3/50/415 volt Drying chamber 610mm diameter x 1065mm deep Drying chamber heated by electric elements spaced equally on exterior of chamber Unit with (4) Busch single stage rotary vane vacuum pump. Model R-5. Built-on controls consisting of: start/stop button for heating and vacuum pump, temperature controller, temperature safety trip, pressure gauge. Unit fully enclosed in cabinet.

Shelf Dryer Chamber rated FV, with 3" spacing between shelves. (18) usable shelves. Hinged front door with (2) sight glasses, hand wheel closers.

• Vinyl coated shelf dryer. Shelf temperature estimated ~212° F 58" wide x 79" long on 3" spacing.
• Cast Iron housing with internal coating, Ceilcoat Flakeline 2226F, hinged doors on the front and back of chamber, Chamber bolts together in center.
• Each door has 6" sight glasses on the doors. Swing bolt closers on the doors.

chrome plated lab size electrically heated sample oven Rated 500 watt, 220 volt Internal chrome plated chamber Currently has (1) 440mm long x 320mm deep wire mesh removable shelf (space for 4) Built-on heater and temperature controls. Hinged front door with 30mm inspection port, chamber rear with 30mm vent

• Hot water generator for a Stokes shelf dryer. Size 2" x 1" x 5" A 5 sq.ft. carbon steel, Bell and Gosset heat exchanger, driven by a 7.5 hp. Baldor electric motor, at 3500 rpm. Serial # 92X80103-10. . NB # 29680. Rated for shell 150 psi at 375 degrees F, tubes 150 psi at 375 degrees F.
• With Taylor chart recorders and explosion proof switches.
• Requires connections for Steam, 40 psi at 1" feed line, Water 2" inlet and outlet lines.

Rated FV @ 300 degrees on the housing,, with 3" spacing between shelves. Left hinged front door with (2) sight glasses, hand wheel closers. Complete with Stainless steel product trays, 28" W x 43" L x 2" H. Weight 9800 lbs. Number of Pans: 36. Pan Capacity: 50.4 ft3.

carbon steel chamber, Nickel shelf vacuum shelf dryer. 98% nickel heated shelves, 100mm spacing between shelves. Chamber pressure full vacuum, (1) hinged door with davit and 200mm diameter sight glass.

Devine vinyl coated shelf dryer Shelf temperature estimated ~212° F Unit has (16) coated cored shelves, 58" wide x 79" long on 3" spacing. Cast Iron housing with internal coating, Ceilcoat Flakeline 2226F, hinged doors on the front and back of chamber, Each door has 6" sight glasses on the doors. Swing bolt closers on the doors.

Vacuum Shelf Dryer, electrically heated. Shelves with 19 pans, 990mmx490mmx50mm, chamber volumn is 1,400 liters, Vacuum Shelf Dryer by 220V 3/ PE 50Hz, (1) control cabinet.

vacuum shelf dryer system, oil heated, (2) 470mm wide x 930mm long x 40mm deep stainless steel trays, built on control panel with heater, circulation pump, vacuum pump and thermal reset trip, unit with (1) oil circulation pump driven by 1 hp, 3/50/360/440 volt, 1420 rpm motor, (1) carbon steel single stage vacuum pump, manufactured by General engineering ltd, driven by 3 kw, 3/50/220-240/380-415 volt, 1420 rpm motor

vacuum shelf dryer. shelves cored for steam heating, Distance between shelves 3". Hinged front door with swing bolt closure. Also 2-3" sight glasses. Unit full insulation. Openings: vac 1-4", 2-2"; steam 4-3/4".

Devine vinyl coated shelf dryer Shelf temperature estimated ~212° F 58" wide x 79" long on 3" spacing. each shelf designed for liquid heat though a common manifold. Cast Iron housing with internal coating, Ceilcoat Flakeline 2226F, hinged doors on the front and back of chamber, chamber bolts together in center.
Each door has 6" sight glasses on the doors. Swing bolt closers on the doors.

approx 4 square meter useful surface area,

approx 600 liter volume,

built into wall design,

hinged front door,

halar lined chamber Nickel shelf vacuum shelf dryer 98% nickel shelves @ 100mm spacing Dryer cabinet 1600mm long x 1400mm wide x 2000mm high. Equipped with (1) hinged front door with davit and 200mm sight glass Internal pressure full vacuum Openings: 2-75mm, 1-150mm, 1-75mm

• Max steam pressure -3.5 barg
• vacuum tray dryer with mirror polish finish internal, rated for GMP use. Sanitary construction.
• Complete with vacuum condenser and condensate pot. Can be ASME stamped. With 3 heating plates(dummy on top) heating plate size 420 mm x 420 mm x 28 mm Working pressure 5 kg/cm2. Circulation designed for Steam/Water. Chamber rated for FV 1 kg/cm2. Door gasket is silicone rubber. Approximate dimensions of oven are 600 mm x 600 mm x 650 mm. Complete with 0.5 square meter shell and tube heat exchanger (316 SS tube side, 304 SS shell side, and a 30 liter condensate pot of 316 SS.
• If Hi therm oil is used, temperature can go up to 100 degrees C.

halar lined chamber, Nickel shelf, vacuum shelf dryer. Internal pressure full vacuum, 98% Nickel shelves @ 100mm spacing. (1) hinged front door with davit and 200mm sight glass. 2-75mm, 1-50mm nozzles @ top, 1-75mm on side. SS water seal vac pump (#89776).

Turbo dryer/washer w/hinged doors. (3) 24" x 16" ceramic panel heaters 3/60/208 volt, 40 amps max max w/temp recorder.