Capacity Design: 5.7 m3 (200 ft3). Orientation: Vertical. Width: 1,372 mm (54 in). Height: 1,219 mm (48 in). Length: 1,346 mm (53 in).

Capacity Design: 5.7 m3 (200 ft3). Orientation: Vertical. Width: 1,372 mm (54 in). Height: 1,219 mm (48 in). Length: 1,346 mm (53 in). Support Type: Lugs.

With three air hammers. Capacity Design: 45.3 m3 (1,600 ft3). Orientation: Vertical. Width: 2,438 mm (96 in). Height: 9,449 mm (372 in). Support Type: Lugs.

15 HP drive on live bottom Capacity Design: 12.7 m3 (450 ft3). Orientation: Vertical. Width: 1,829 mm (72 in). Cone Length: 1,372 mm (54 in). Length: 4,420 mm (174 in). Live Bottom: Yes.

agitated weigh feed hopper, clamped flat top, weld coned bottom, agitator driven by 1 HP, 3/50/230 volt, 1715 rpm motor via 195:1 ratio SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, which are mounted on a carbon steel frame Capacity Design: 0.4 m3 (14.2 ft3). Orientation: Vertical. Width: 1,000 mm (39.4 in). Cone Length: 500 mm (19.7 in). Length: 350 mm (13.8 in). Support Type: Lugs.

30 Cu. Ft. Overall size is 44" x 48" X 54" high, with a cone shaped bottom. These bins are stackable and have lugs and fork pockets, for moving by either crane or forklift. Top opening is 22" diameter round, bottom opening is 12' with a manual locking butterfly valve. Designed for moving bulk powders. Capacity Design: 0.85 m3 (30 ft3). Orientation: Vertical. Width: 1,219 mm (48 in). Height: 1,372 mm (54 in). Length: 1,118 mm (44 in). Support Type: Legs.

Live bottom motion generator (53-VM-510) is a type CD18-5380, serial # 837356. rated for 5380 lbs of force 1800 rpm. 3 HP, 230/460 volts 3 ph. 60 Hz. Capacity Design: 1.84 m3 (65 ft3). Orientation: Vertical. Width: 2,286 mm (90 in). Height: 2,210 mm (87 in). Length: 2,210 mm (87 in). Support Type: Legs. Live Bottom: Yes.

fork liftable product tote bin Capacity Design: 1 m3 (35.3 ft3). Orientation: Vertical. Width: 1,100 mm (43.3 in). Cone Length: 1,200 mm (47.2 in). Height: 1,000 mm (39.4 in). Length: 1,100 mm (43.3 in).

fork liftable product tote bin Capacity Design: 1 m3 (35.3 ft3). Orientation: Vertical. Width: 1,100 mm (43.3 in). Cone Length: 1,200 mm (47.2 in). Height: 1,000 mm (39.4 in). Length: 1,100 mm (43.3 in).

With bottom feeder and discharge conveyor, Cage ladder. Capacity Design: 111.6 m3 (3,940 ft3). Orientation: Vertical. Width: 3,353 mm (132 in). Cone Length: 1,448 mm (57 in). Height: 16,078 mm (633 in). Support Type: Legs. Live Bottom: Yes.

Has Live bottom- Can be used with bagger in basement below. Capacity Design: 5.7 m3 (200 ft3). Orientation: Vertical. Width: 1,829 mm (72 in). Cone Length: 914.4 mm (36 in). Height: 1,829 mm (72 in). Support Type: Legs. Live Bottom: Yes.

Has Live bottom- Can be used with bagger downstairs Capacity Design: 5.7 m3 (200 ft3). Orientation: Vertical. Width: 1,829 mm (72 in). Cone Length: 914.4 mm (36 in). Height: 1,829 mm (72 in). Support Type: Legs. Live Bottom: Yes.

bolt flat top, weld coned bottom. Capacity Design: 0.93 m3 (32.9 ft3). Orientation: Vertical. Width: 500 mm (19.7 in). Length: 730 mm (28.7 in).

working pressure: 0,04 bar@ 20°C, weld slight coned top, weld coned bottom, openings top: manway 500 mm, (1) DN 100, (2) DN 250, (1) DN 200, openings sidewall: (1) DN 100, openings cone section: (1)bottom outlet nozzle DN 250, (1) DN 100, (1) DN 50, Capacity Design: 38 m3 (1,342 ft3). Orientation: Vertical. Width: 3,600 mm (141.7 in). Cone Length: 2,450 mm (96.5 in). Length: 3,300 mm (129.9 in).

2" flanged center btm outlet. Bolted cone top Bolted cone top. Approx 18' high. Capacity Design: 1.84 m3 (65 ft3). Width: 1,219 mm (48 in). Height: 5,486 mm (216 in). Length: 1,524 mm (60 in). Support Type: Lugs.

flat top and btm. Hoover Products tote bin. Openings: top 1-22" w/loose cover, 1-2"; btm 1-2 1/2". Stacking legs. Dot #57, tare weight 515 lbs. Capacity Design: 1.5 m3 (53 ft3). Width: 1,219 mm (48 in). Height: 1,067 mm (42 in). Length: 1,219 mm (48 in).

tote bin open top, flat btm. Capacity Design: 0.76 m3 (27 ft3). Width: 914.4 mm (36 in). Length: 1,067 mm (42 in).

tote bin open top, flat bottom Capacity Design: 0.76 m3 (27 ft3). Width: 914.4 mm (36 in). Length: 1,067 mm (42 in).

with dish head and cone bottom Rated for atmospheric with a 3/16" wall thickness Capacity Design: 11.2 m3 (396 ft3). Orientation: Vertical. Width: 914.4 mm (36 in). Cone Length: 2,134 mm (84 in). Length: 3,048 mm (120 in). Support Type: Lugs.

pressure 0,9 bar @ 250 deg C, volume 100 liter weld dished top and bottom openings top: 1-210mm, 2-12mm, bottom: 1-100mm, Capacity Design: 0.1 m3 (3.5 ft3). Orientation: Vertical. Width: 470 mm (18.5 in). Cone Length: 400 mm (15.7 in). Length: 370 mm (14.6 in). Support Type: Legs.

pressure 0,9 bar @ 250 deg C, volume 100 liter weld dished top and bottom, openings top: 1-210mm, 2-12mm, bottom: 1-100mm, Capacity Design: 0.1 m3 (3.5 ft3). Orientation: Vertical. Width: 470 mm (18.5 in). Cone Length: 400 mm (15.7 in). Length: 370 mm (14.6 in). Support Type: Legs.

fork liftable product hopper pressure rated 3 psi @ 100 degrees F Capacity Design: 2 m3 (70.6 ft3). Orientation: Vertical. Width: 1,219 mm (48 in).

fork liftable product hopper pressure rated 3 psi @ 100 degrees F Capacity Design: 2 m3 (70.6 ft3). Orientation: Vertical. Width: 1,219 mm (48 in).

agitated weigh feed hopper clamped flat top, weld coned bottom agitator driven by approximately a 1 HP, 3/50/230 volt, 1715 rpm motor via 195:1 ratio SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, bottom outlet with a screw discharge conveyor, driven by a 1.5 hp, 3/50/180 volt motor, which are mounted on a carbon steel frame with wheels Capacity Design: 0.011 m3 (0.39 ft3). Width: 1,000 mm (39.4 in). Cone Length: 540 mm (21.3 in). Length: 370 mm (14.6 in). Support Type: Lugs.

agitated weigh feed hopper clamped flat top, weld coned bottom agitator driven by approx 1 HP, 3/50/230 volt, 1715 rpm motor via SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, bottom outlet with a screw discharge conveyor, driven by a 1.5 hp, 3/50/180 volt motor which are mounted on a carbon steel frame with wheels Capacity Design: 0.003 m3 (0.11 ft3). Width: 600 mm (23.6 in). Cone Length: 400 mm (15.7 in). Length: 300 mm (11.8 in). Support Type: Lugs.

clamped flat top, weld coned bottom agitator driven by 5 HP, 3/50/230 volt, 1750 rpm motor via SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, bottom outlet with a screw discharge conveyor, driven by a 0.5 hp, 3/50/180 volt motor, which are mounted on a carbon steel frame with wheels Capacity Design: 0.002 m3 (0.08 ft3). Width: 600 mm (23.6 in). Cone Length: 580 mm (22.8 in). Length: 120 mm (4.7 in). Support Type: Lugs.

With internals polished to #4 140 grit finish. rated FV/45psig @ -20 to 250 degrees F. Top nozzle schedule (1) 1”, (1) 2”, (3) 3”, (1) 10”, 18” hinged man way. CIP spray ball. Capacity Design: 3.6 m3 (128 ft3). Orientation: Vertical. Width: 1,168 mm (46 in). Cone Length: 819.2 mm (32.3 in). Length: 2,388 mm (94 in). Support Type: Lugs.

Welded dish top and welded cone bottom with internals polished to #4 140 grit finish. rated FV/90psig @ -20 to 250 degrees F. Top nozzle schedule (1) 1”, (1) 2”, (3) 3”, (1) 10”, 18” hinged man way. Bottom outlet is a 26” flange connected to a cone bottom discharge chute. Capacity Design: 3.6 m3 (128 ft3). Orientation: Vertical. Width: 1,168 mm (46 in). Cone Length: 812.8 mm (32 in). Length: 2,388 mm (94 in). Support Type: Lugs.

storage bin Rated FV/90psig @ -20 to 250 degrees F. Welded dish top and welded cone bottom Rated for 1000 Gallons. with internals polished to #4 140 grit finish. Top nozzle schedule (1) 1”, (1) 2”, (3) 3”, (1) 10”, 18” hinged man way. Bottom outlet is a 26” flange connected to a cone bottom discharge chute. Capacity Design: 3.8 m3 (133 ft3). Orientation: Vertical. Width: 1,219 mm (48 in). Cone Length: 1,219 mm (48 in). Length: 2,438 mm (96 in). Support Type: Lugs.

hopper welded top, feed has s/steel rotary lock valve driven by 2-speed motor, 0.5 kw, 3/50/380-420/220-240 volt, 1400 rpm or 0.5kw, 3/60/440-480/250-280 volt, 1690 rpm, openings top 1-200mm (feed), 1-50mm, side 1-50mm, 1-25mm (sensor), bottom 1-250mm, with insulation and cladding Capacity Design: 0.3 m3 (10.6 ft3). Orientation: Vertical. Width: 680 mm (26.8 in). Cone Length: 1,100 mm (43.3 in). Length: 300 mm (11.8 in). Support Type: Lugs.

IBC fork liftable hopper, weld flat top, weld coned bottom (off center), openings top: 1-420mm with hinge, bottom: 1-250mm with valve Capacity Design: 427 m3 (15,079 ft3). Width: 1,000 mm (39.4 in). Cone Length: 660 mm (26 in). Length: 340 mm (13.4 in).

IBC fork liftable hopper, weld flat top, weld coned bottom (off center) openings top: 1-420mm with hinge, bottom: 1-250mm with valve Capacity Design: 427 m3 (15,079 ft3). Width: 1,000 mm (39.4 in). Cone Length: 660 mm (26 in). Length: 340 mm (13.4 in).

IBC fork liftable hopper, weld flat top, weld coned bottom (off center) openings top: 1-420mm with hinge, bottom: 1-250mm with valve Capacity Design: 427 m3 (15,079 ft3). Width: 1,000 mm (39.4 in). Cone Length: 660 mm (26 in). Length: 340 mm (13.4 in).

fully insulated and cladd, handrail around top, Capacity Design: 304 m3 (10,736 ft3). Orientation: Vertical. Width: 6,000 mm (236.2 in). Cone Length: 5,000 mm (196.9 in). Length: 231,140 mm (9,100 in). Support Type: Legs.

fully insulated and cladd, handrail around top, Capacity Design: 117 m3 (4,132 ft3). Orientation: Vertical. Width: 3,500 mm (137.8 in). Cone Length: 2,880 mm (113.4 in). Length: 284,988 mm (11,220 in). Support Type: Legs.

mounted on a stainless steel skirt with a carbon steel frame with legs, handrail around top, Capacity Design: 117 m3 (4,132 ft3). Orientation: Vertical. Width: 3,500 mm (137.8 in). Cone Length: 2,880 mm (113.4 in). Length: 284,988 mm (11,220 in). Support Type: Legs.

fully insulated and cladd, handrail around top, Capacity Design: 117 m3 (4,132 ft3). Orientation: Vertical. Width: 3,500 mm (137.8 in). Cone Length: 2,880 mm (113.4 in). Length: 284,988 mm (11,220 in). Support Type: Legs.

fully insulated and cladd, handrail around top, Capacity Design: 117 m3 (4,132 ft3). Orientation: Vertical. Width: 3,500 mm (137.8 in). Cone Length: 2,880 mm (113.4 in). Length: 284,988 mm (11,220 in). Support Type: Legs.

fully insulated and cladd, handrail around top, Capacity Design: 117 m3 (4,132 ft3). Orientation: Vertical. Width: 3,500 mm (137.8 in). Cone Length: 2,880 mm (113.4 in). Length: 11,220 mm (441.7 in). Support Type: Legs.

handrail around the top, Capacity Design: 117 m3 (4,132 ft3). Orientation: Vertical. Width: 3,500 mm (137.8 in). Cone Length: 2,880 mm (113.4 in). Length: 284,988 mm (11,220 in). Support Type: Legs.

fully insulated and cladd, handrail around top, Capacity Design: 304 m3 (10,736 ft3). Orientation: Vertical. Width: 6,000 mm (236.2 in). Cone Length: 5,000 mm (196.9 in). Length: 231,140 mm (9,100 in). Support Type: Legs.