Stainless Steel 304 Bin - IPP# 225278

Type: Bin

Condition: Used

Material: Stainless Steel 304

Clad: Yes

Capacity Design: 0.3 m3 (10.6 ft3)

Orientation: Vertical

hopper welded top, feed has s/steel rotary lock valve driven by 2-speed motor, 0.5 kw, 3/50/380-420/220-240 volt, 1400 rpm or 0.5kw, 3/60/440-480/250-280 volt, 1690 rpm, openings top 1-200mm (feed), 1-50mm, side 1-50mm, 1-25mm (sensor), bottom 1-250mm, with insulation and cladding

Width: 680 mm (26.8 in). Cone Length: 1,100 mm (43.3 in). Length: 300 mm (11.8 in). Support Type: Lugs.

Type: Bin

Manufacturer: K-Tron

Model: K-module

Condition: Used

Material: Stainless Steel 304

Capacity Design: 0.4 m3 (14.2 ft3)

Orientation: Vertical

agitated weigh feed hopper, clamped flat top, weld coned bottom, agitator driven by 1 HP, 3/50/230 volt, 1715 rpm motor via 195:1 ratio SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, which are mounted on a carbon steel frame

Width: 1,000 mm (39.4 in). Cone Length: 500 mm (19.7 in). Length: 350 mm (13.8 in). Support Type: Lugs.

Type: Bin

Manufacturer: K-Tron

Condition: Used

Material: Stainless Steel 304

Capacity Design: 0.011 m3 (0.39 ft3)

Width: 1,000 mm (39.4 in)

agitated weigh feed hopper clamped flat top, weld coned bottom agitator driven by approximately a 1 HP, 3/50/230 volt, 1715 rpm motor via 195:1 ratio SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, bottom outlet with a screw discharge conveyor, driven by a 1.5 hp, 3/50/180 volt motor, which are mounted on a carbon steel frame with wheels

Cone Length: 540 mm (21.3 in). Length: 370 mm (14.6 in). Support Type: Lugs.

Type: Bin

Manufacturer: K-Tron

Model: K-modular

Condition: Used

Material: Stainless Steel 304

Capacity Design: 0.003 m3 (0.11 ft3)

Width: 600 mm (23.6 in)

agitated weigh feed hopper clamped flat top, weld coned bottom agitator driven by approx 1 HP, 3/50/230 volt, 1715 rpm motor via SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, bottom outlet with a screw discharge conveyor, driven by a 1.5 hp, 3/50/180 volt motor which are mounted on a carbon steel frame with wheels

Cone Length: 400 mm (15.7 in). Length: 300 mm (11.8 in). Support Type: Lugs.