Stainless Steel Austenitic Kelzenber Dueren Dryer-Rotary Vacuum - IPP# 105572

Type: Dryer-Rotary Vacuum

Manufacturer: Engelsmann AG

Model: K127AM200/180

Condition: Used

Material: Stainless Steel Austenitic

Capacity Design: 0.25 m3 (8.8 ft3)

Capacity Working: 0.17 m3 (6 ft3)

Vacuum dryer system internal pressure rated -1/+1bar @ -10/+165 degrees C (volume 250 liter), jacket pressure rated -1/+8bar @ -10/+165 degrees C (volume 35 liter) type CD180M-4 3~/50Hz/230-400V/1,460rpm CE confirm, EExdeIICT4, system including: (1) 3.1m² 1.4571 stainless steel tube and shell heat exchanger/condenser, (1) 8m³/h @ 3m head iron cast centrifugal pump, (1) 50 liter 1.4571 stainless steel condensate receiver, (1) 20 liter 1.4571 stainless steel gas separator, (1) 17.5 liter 1.4571 stainless steel jacketed pressure tank, (1) Frequency converter on pallet, (2) stainless steel guards on pallet, (2) Valves and (1) chain on pallet, Accessories on pallet

Diameter: 600 mm (23.6 in). Length: 2,300 mm (90.6 in). Height: 2,195 mm (86.4 in). Temperature: 165 °C (329 °F). Pressure: 1 bar (14.5 psi). Rated for Vacuum: Yes. Heat Transfer Surface Area: 4.4 m² (47 ft²). Agitation Seal Type: Mechanical. Jacket Material: Stainless Steel Austenitic. Jacket Pressure: 8 bar (116 psi). Jacket Temperature: 165 °C (329 °F).

Type: Dryer-Rotary Vacuum

Manufacturer: Giovanola

Condition: Used

Material: Stainless Steel Austenitic

Capacity Design: 2.2 m3 (78.4 ft3)

Capacity Working: 1.6 m3 (56.5 ft3)

Rotary vacuum paddle dryer system system includes tanks, filters, pumps and other ancillaries

Diameter: 1,500 mm (59.1 in). Length: 3,985 mm (156.9 in). Height: 2,950 mm (116.1 in). Temperature: 165 °C (329 °F). Rated for Vacuum: Yes. Heat Transfer Surface Area: 5.1 m² (55.2 ft²). Shaft Cored and National Board Stamped: Yes. Orientation: Horizontal. Operational Mode: Batch. Agitation: Yes. Dust Collection: Yes. Jacket Material: Stainless Steel Other. Jacket Pressure: 6.5 bar (94.3 psi). Jacket Temperature: 165 °C (329 °F). Jacket Type: Half Pipe/Limpet.

Type: Dryer-Rotary Vacuum

Manufacturer: Giovanola

Condition: Used

Material: Stainless Steel Austenitic

Capacity Design: 10 m3 (353.1 ft3)

Capacity Working: 6.7 m3 (236.6 ft3)

internal design pressure -1/3.2 bar @ 200 degrees C (10000 liter), jacket 6 bar @ 200 degrees C (420 liter) jacketed rotary vacuum paddle dryer shaft/paddle 3 bar @ 200 degrees C (520 liter) (1) weld dished end, (1) bolt dished end paddle belt driven by 30kw motor, paddle speed 3 rpm paddle is cored for steam heating, rotary union joint, center bottom outlet

Diameter: 1,794 mm (70.6 in). Length: 4,491 mm (176.8 in). Temperature: 200 °C (392 °F). Pressure: 3.2 bar (46.4 psi). Rated for Vacuum: Yes. Heat Transfer Surface Area: 25.1 m² (270 ft²). Shaft Cored and National Board Stamped: Yes. Agitation: Yes. Jacket Material: Stainless Steel 316. Jacket Pressure: 6 bar (87 psi). Jacket Temperature: 200 °C (392 °F). Jacket Type: Half Pipe/Limpet.

Type: Dryer-Rotary Vacuum

Manufacturer: 3V Cogeim

Model: EC10000

Condition: Used

Material: Stainless Steel Austenitic

Capacity Design: 10 m3 (353.1 ft3)

Capacity Working: 6.7 m3 (236.6 ft3)

jacketed rotary vacuum paddle dryer Internal design pressure: -1/6 bar @ -10/150 degrees C (10180 liter) Coil jacket: 6 bar @ -10/150 degrees C (500 liter) Rotor/paddle: 6 bar @ -10/150 degrees C (300 liter) (1) bolt flat end (drive), (1) clamped flat end, rotor/paddle with union joint and cored for steam heating, rotor/paddle driven by approx 100kw motor via a gearbox center bottom discharge

Diameter: 1,800 mm (70.9 in). Length: 4,075 mm (160.4 in). Temperature: 150 °C (302 °F). Pressure: 6 bar (87 psi). Rated for Vacuum: Yes. Heat Transfer Surface Area: 22.7 m² (244 ft²). Shaft Cored and National Board Stamped: Yes. Orientation: Horizontal. Operational Mode: Batch. Jacket Material: Stainless Steel 321. Jacket Pressure: 6 bar (87 psi). Jacket Temperature: 150 °C (302 °F). Jacket Type: Half Pipe/Limpet.