Quote Cart
with #4 finish for product contact, sanitary double cone blender, Rated for max. density 70 lbs./cu. ft., Rotation from drive side is clockwise, speed is 11.3 rpm. Agitator speed is 3300 rpm. With sanitary Gemcomatic assembly for discharge to drums. Auto loading, Chopper with out blade. 18" port. With NEMA 12 Control Panel, including circuit breaker and local controls. Agitator motor with 20 HP, 1800 rpm, 3 ph/60 Hz/ 230/460v. TEFC with a 256T frame.
Drive motor is 7.5 HP,1800 RPM, 3 ph/60 Hz/ 230/460v. TEFC with a 213T frame
main braking motor is 3 HP, 1800 rpm,3 ph/60 Hz/ 230/460v. TEFC with a 213T frame. Both drive and brake are tied in through a Symcyclo gear reduction drive at 17:1 ratio. Sanitary covers over drives and legs.
Type: Mixer-Twin Shell & Double Cone
Manufacturer: Gemco
Model: HT-SP-AGII
Condition: Used
Material: Stainless Steel 304
Capacity Design: 0.85 m3 (30 ft3)
Capacity Operating: 0.57 m3 (20 ft3)
Porta Hopper double cone Blender with intensifier bar
with (2) Hopper bottoms. Intesifier bar is set up for dry mixing, has liquid capabilities
56" diameter shell
gear head motor for blender drive. Blend speed 13.
4 RPM-Maximum desity of charge 125 lbs./cu.ft.
Intensifier Bar: Yes. Product Density: 1,200 kg/m3 (75 lb/ft3).
Type: Mixer-Twin Shell & Double Cone
Manufacturer: Gemco
Model: Gemcomatic
Condition: Used
Material: Stainless Steel 304
Capacity Design: 1.51 m3 (53.3 ft3)
Capacity Operating: 1 m3 (35.3 ft3)
double cone blender
with intensifier bar
rated 55 lbs/CuFt
Has liquid addition capabilities
Internal Finish #4 polish (20-25 Micro Inch)
Pneumatic valve on blender f eed opening
2 HP gear head motor for blender drive
Other general notes: Vessel speed(rpm), 14.6, Positioning speed (rpm) 1.46, Agitator speed (FPM) 4900 approx., Total Volume (CF) 53.3.
Intensifier Bar: Yes. Internal Finish: #4 Ra50. Product Density: 881 kg/m3 (55 lb/ft3).
Type: Mixer-Twin Shell & Double Cone
Manufacturer: Paul O Abbe
Model: RVB 36
Condition: Used
Material: Stainless Steel 304
Capacity Design: 0.85 m3 (30 ft3)
Capacity Operating: 0.57 m3 (20 ft3)
twin shell blender
36" shell diameter with 18" manway diameter
with air operated butterfly valve
Electrical requirements are 230/460, 3 ph, 60 hz
Vessel Pressure: 1.01 bar (14.7 psi). Vessel Temperature: 37.8 °C (100 °F).
Type: Mixer-Twin Shell & Double Cone
Manufacturer: Patterson Kelly
Condition: Used
Material: Stainless Steel 304
Capacity Design: 0.42 m3 (15 ft3)
Capacity Operating: 0.28 m3 (10 ft3)
twin shell blender
90 lbs. cu.ft. maximum density
shell diameter is 24", manway diameter is 17 & 3/4"
with a air operated butterfly valve
Electrical requirement is 208/230/460 volts, 3 ph, 60 hz. With brake
Product Density: 1,450 kg/m3 (90 lb/ft3).