Stainless Steel 316 Luwa SMS D-850/4700/10 Dryer-Thin Film - IPP# 70263

Type: Dryer-Thin Film

Manufacturer: Luwa SMS

Model: D-850/4700/10

Condition: Used

Material: Stainless Steel 316L

Heat Transfer Surface Area: 11 m² (118.4 ft²)

Internal Pressure Rating: 0.5 bar (7.3 psi)

thin film continuous contact dryer. pressure internal 0.5 bar and full vacuum @ 220 degrees C. Jacket rated 13 bar @ 220 degrees C, Shell 850mm diameter x 4800mm long, Rotor was driven by 30 KW, 3/50/380 volt, 260 rpm output speed.

Internal Temperature Rating: 220 °C (428 °F). Jacket Pressure: 13 bar (188.5 psi). Jacket Temperature: 220 °C (428 °F). Orientation: Horizontal. Vacuum Rated: Yes. Shell Diameter: 850 mm (33.5 in). Shell Length: 4,800 mm (189 in).

Type: Dryer-Thin Film

Manufacturer: Luwa SMS

Model: DK600/4500/10

Condition: Used

Material: Stainless Steel 316

Heat Transfer Surface Area: 7.5 m² (80.7 ft²)

Internal Pressure Rating: 0.5 bar (7.3 psi)

thin film continuous contact dryer (cooler) Jkt rated 8 bar @ 50 deg C Shell 600mm dia (24") x 4.492m (177") long

Internal Temperature Rating: 120 °C (248 °F). Jacket Pressure: 8 bar (116 psi). Jacket Temperature: 50 °C (122 °F). Orientation: Horizontal. Shell Diameter: 600 mm (23.6 in). Shell Length: 4,492 mm (176.9 in).

Type: Dryer-Thin Film

Manufacturer: Luwa SMS

Model: DK600/4500/10

Condition: Used

Material: Stainless Steel 316

Heat Transfer Surface Area: 7.5 m² (80.7 ft²)

Internal Pressure Rating: 0.5 bar (7.3 psi)

thin film continuous contact dryer (cooler). Jkt rated 8 bar @ 50 deg C, Shell 600mm dia (24") x 4.492m (177") long. Rotor driven by 25 KW, 3/50/380 volt motor, 260 rpm output speed.

Internal Temperature Rating: 120 °C (248 °F). Jacket Pressure: 8 bar (116 psi). Jacket Temperature: 50 °C (122 °F). Orientation: Horizontal. Shell Diameter: 600 mm (23.6 in). Shell Length: 4,492 mm (176.9 in).

Type: Dryer-Thin Film

Manufacturer: Luwa SMS

Model: 850/4700/10

Condition: Used

Material: Stainless Steel 316

Heat Transfer Surface Area: 11 m² (118.4 ft²)

Internal Pressure Rating: 0.5 bar (7.3 psi)

thin film continous contact dryer. Jkt rated 13 bar @ 220 deg C, int rated 0.5 bar and full vac @ 220 deg C. Shell 850mm (34") dia x 4800mm (15.8') long

Internal Temperature Rating: 220 °C (428 °F). Jacket Pressure: 13 bar (188.5 psi). Jacket Temperature: 220 °C (428 °F). Orientation: Horizontal. Vacuum Rated: Yes. Shell Diameter: 850 mm (33.5 in). Shell Length: 4,800 mm (189 in).