Quote
Quote Cart
clear all items

Carbon Steel Apex B21E Dryer-Shelf - IPP# 704960

  • Carbon Steel Apex B21E Dryer-Shelf - IPP# 704960 Carbon Steel Apex B21E Dryer-Shelf - IPP# 704960
  • Carbon Steel Apex B21E Dryer-Shelf - IPP# 704960
Overview
Dryer-Shelf
Apex
B21E
Used
Carbon Steel
Capacity
2 m² (21.5 ft²)
Other Specifications
6
813 mm (32 in)
406.4 mm (16 in)
1.01 bar (14.7 psi)
Dimensions
Vertical
  • Electric heated carbon steel shelf dryer.
  • (6) 16" wide x 32" long x 1" deep trays @ 2 1/4" spacing. Trays with perforated bottom.
  • Electrics: 240 volt, 1 phase, 50 Hz. Electric fan heated, belt driven by 250 watt, 1/50/220/240 volt, 1420 rpm motor.

Similar Equipment

Hot water Generator for a Stokes 600-540 Shelf Dryer

Type: Dryer-Shelf

Manufacturer: Stokes

Model: 600-540

Condition: Used

Material: Carbon Steel

Orientation: Vertical

Temperature: 190.6 °C (375 °F)

  • Hot water generator for a Stokes shelf dryer. Size 2" x 1" x 5" A 5 sq.ft. carbon steel, Bell and Gosset heat exchanger, driven by a 7.5 hp. Baldor electric motor, at 3500 rpm. Serial # 92X80103-10. . NB # 29680. Rated for shell 150 psi at 375 degrees F, tubes 150 psi at 375 degrees F.
  • With Taylor chart recorders and explosion proof switches.
  • Requires connections for Steam, 40 psi at 1" feed line, Water 2" inlet and outlet lines.

Carbon Steel Stokes 338-J-16 Dryer-Shelf

Type: Dryer-Shelf

Manufacturer: Stokes

Model: 338-J-16

Condition: Used

Material: Carbon Steel

Heat Transfer Surface Area: 18.2 m² (195.5 ft²)

Vacuum Rated: Yes

  • Vacuum shelf dryer chamber only. Hinged door w/quick opening bolts. 50 psi shelf working pressure, full vacuum internal. (16) shelf capacity (7 shelves removed),set up for drum and shelf drying. Lot #P65883.

Number of Shelves: 16. Shelf Pressure: 3.4 bar (50 psi).

Carbon Steel Caltherm Dryer-Oven

Type: Dryer-Oven

Manufacturer: Caltherm

Condition: Used

Material: Carbon Steel

Capacity: 4.1 m3 (144 ft3)

Temperature: -16.7 °C (2 °F)

electric heated oven with two chambers 23" x 35" 39" each with (2) shelves made of c/steel rollers, distance between shelves 15", (2) hinged front doors, rear mounted fan driven by 0.75/0.99kw, 3/50/220-260/380-420/256-277/440-460 volt, 1385/1680 rpm motor, built on control panel, oven with a trolley, manual raise/lower mechanism, c/steel rollers for rolling objects into oven Previous use: Glass Moulds max weight 350kg

Heating Type: Electric. Number of Shelves: 4. Shelves MOC: Carbon Steel. Operational Mode: Batch.

Carbon Steel Dryer-Shelf

Type: Dryer-Oven

Manufacturer: Barlow Whitney

Model: E250-VACO-H-2442

Condition: Used

Material: Carbon Steel

Capacity: 0.06 m3 (2 ft3)

Temperature: 250 °C (482 °F)

operating vacuum 0.667 mbar heating rated 18 KW nominal, vacuum pump 0.75 KW 3/50/415 volt Drying chamber 610mm diameter x 1065mm deep Drying chamber heated by electric elements spaced equally on exterior of chamber Unit with (4) Busch single stage rotary vane vacuum pump. Model R-5. Built-on controls consisting of: start/stop button for heating and vacuum pump, temperature controller, temperature safety trip, pressure gauge. Unit fully enclosed in cabinet.

Heating Type: Electric. Orientation: Vertical. Vacuum Rated: Yes. Number of Shelves: 5. Number of Trays: 2.