Name: Dryer-Spray
Brand: Niro
SKU: 8552

Stainless Steel 304 Niro SD-25 N-R Dryer-Spray

Type: Dryer-Spray

Manufacturer: Niro

Model: SD-25 N-R

Condition: Used

Material: Stainless Steel 304

Diameter: 3,400 mm (133.9 in)

Atomizer Type: Rotary Disc-Wheel

multifunctional Spray dryer system with rotary atomization and baghouse filter. on Zinc Oxide, but can dry other inorganic compounds. This spray dryer is an all welded unit comprised of a chamber and cone with the following dimensions: 3.4m diameter x 4.8m straight side x 2.3m coned bottom, 700mm x 400mm access door. The chamber is equipped with pneumatic hammers for helping powder discharge. This spray dryer configuration has a 2 point discharge system. The rotary atomizer is a Niro type F15-GVWO-NPSS rotary atomizer, serial # 767, Drying gas is supplied by a Niro direct gas fired air heater with Maxon airflow burner type NP-35.5, fabrication # 471, liquid petroleum gas fired, 297 kw nominal load, gas supply pressure 8mbar (min), 21 mbar (max). Product/ drying gases are separated by a bag filter, a 31 square meter (339 square feet) Includes the following optional accessories: (1) Brass Hydra-cell spray pump, type G16XDTHFECA, serial # 142602, driven by 2.2/2.55 kw, 3/50/220-240/380-420/440-480 volt, 1420/1720 rpm motor. (1) 1700 liter 304 s/steel feed tank with feed pump, open top, weld coned bottom, 1.4m diameter x 1000mm straight side, Mono Merlin rotary feed pump, type SAB2241VN8, tank and pump mounted on (4) c/steel frame with legs. (1) 250 liter 304 s/steel feed tank with clamp on Lightnin agitator, open top, weld coned bottom, 1.2m diameter x 700mm straight side, Lightnin agitator model LP-75-VH, serial # Q54279, driven by 0.75 kw, 3/50/220/380/420 volt, 1400 rpm motor, tank mounted on (4) c/steel legs. (1) Gericke s/steel centrifugal sifter, type CSM-722-MK2, serial # CM2-7072, 600mm long x 330mm wide,(1) s/steel 3110 m3/hr. @ 160 degrees C fan, manufactured by B.Bille, type HT35-530, fan speed 2900 rpm, 11 kw, 2930 rpm motor. (1) Spiroflow screw conveyor, 60mm diameter x approximately 3m long plastic tube with s/steel screw, driven by 1.75 kw, 3/50/254/277/440 volt, 1115 rpm motor, (1) s/steel 1 ton tote bin, 1m x 1m x 1m deep,

Evaporation Rate: 210 kg/h (463 lb/h). Inlet Temperature: 435 °C (815 °F). Outlet Temperature: 130 °C (266 °F). Heating Type: Gas.

3,400 mm (133.9 in) Stainless Steel 304 Dryer-Spray

Type: Dryer-Spray

Manufacturer: Niro

Model: SD-25 N-R

Condition: Used

Material: Stainless Steel 304

Diameter: 3,400 mm (133.9 in)

Atomizer Type: Inline Mixing Nozzle

multifunctional spray dryer system, with nozzle type atomization, and baghouse filter. on Zinc Oxide, but can dry other inorganic compounds. This spray dryer is an all welded unit comprised of a chamber and cone with the following dimensions: 3.4m diameter x 4.8m straight side x 2.3m coned bottom, 700mm x 400mm access door, chamber with pneumatic hammers for helping powder discharge, Drying gas is supplied by a Niro direct gas fired air heater with Maxon airflow burner type NP-35.5, fabrication # 472, liquid petroleum gas fired, 334 kw nominal load, gas supply pressure 8mbar (min), 21 mbar (max). Product/ drying gases are separated by a bag filter: a 31 square meter (339 square feet) The system also includes the following optional accessories. (1) s/steel centrifugal spray pump, manufactured by Pasilac, type K2-3805-185, serial # 137868, driven by an electric motor. (1) 1700 liter 304 s/steel feed tank with clamp on agitator, open top, weld coned bottom, 1.5m diameter x 1000mm straight side, air driven agitator, tank mounted on (4) carbon steel legs. (1)600mm diameter s/steel single deck vibratory sieve, type VSC600-1-SS, manufactured by Vibrodynamics, serial # 664P driven by 0.5 kw, 3/50/380/420 volt, 1440 rpm motor. (1) s/steel 3110 m3/hr @ 160 deg C fan, manufactured by B.Bille, type HT35-530, fan speed 2790 rpm, 11 kw, 2930 rpm motor. (1) Feluwa high pressure feed pump, type SGL-232/3-K50-M190-ZW, serial # 21/26322, 0.47 m3/hr., 1.5 kw, 1400 rpm.

Evaporation Rate: 210 kg/h (463 lb/h). Inlet Temperature: 425 °C (797 °F). Outlet Temperature: 130 °C (266 °F). Heating Type: Gas.