Quote Cart
CS/SS centrifugal blower system Houston-Texas with Rotary Lobe GAS pump, mfd by Roots, serial # 50289 RP71, Type Wispair. Inlet temp 135 deg F, inlet air 1758 icfm, inlet pressure 14.70 psia, discharge pressure 23.90 psia @ 516 rpm Inlet nozzle 12", outlet nozzle 10". Arrangement: horiz case CS, impellor 304SS. W/Carbone ring air seal. 1. silencer: model SDS-10, part # 58-310-AZ, serial # 11018-92-2 2. silencer: model RISY-10, part # 54-210-FH, serial # 11018-92-2 Motor data: 460V/191A/60HZ/1191 rpm, mfd by W/Marathon, model 150 HP # XD 449TTFS6589 AN V-belt driven. System includes cooling air tower, model AA-2000-10, serial # 392-B2827-1, mfd by Xchanger Inc. Hopkins-Minnesota.
Type: Blower
Manufacturer: Fuller Co.
Model: 16X48V-6821 W.S.
Condition: Used
Material: Carbon Steel
Blower Type: Rotary
Flow Rate: 22,118 m3/h (13,018 CFM)
Sutorbilt Positive Displacement Rotary type liquid sealed vacuum pump/blower Series 3200W. 158 BHP With splash oil lubrication system.
Inlet Diameter: 508 mm (20 in). Outlet Discharge Diameter: 508 mm (20 in). Temperature: 37.8 °C (100 °F). Motor Power: 117.8 kW (158 HP). Pressure: 0.34 bar (4.9 psi).
Type: Blower
Manufacturer: Gebhardt Ventilatoren
Model: P2M-F3W2C-RRBLG270
Condition: Used
Material: Carbon Steel
Blower Type: Exhaust
Flow Rate: 2,664 m3/h (1,568 CFM)
6mbar @ 100 degrees C type 1MJ60802CA31-Z
Speed (RPM): 3,550. Temperature: 100 °C (212 °F). Motor Power: 0.75 kW (1.01 HP). Motor Speed (RPM): 2,840. Power Transmission: Direct Coupled. Pressure: 0.006 bar (0.09 psi).
Type: Blower
Manufacturer: Hansa
Model: EF 125-3X/R
Condition: Used
Material: Carbon Steel
Flow Rate: 800 m3/h (470.9 CFM)
Motor Power: 2.5 kW (3.4 HP)
Radial fan
Motor Speed (RPM): 3,194. Power Transmission: Belt.
Type: Blower
Manufacturer: Robuschi
Condition: Unused
Material: Carbon Steel
Flow Rate: 1,072 m3/h (631 CFM)
Speed (RPM): 4,800
Positive Displacement Rotary Lobe blower Series RBS, size 65/F includes Inlet and Exhaust filters. With patented special three lobe profile rotors with LOW-pulse system to reduce the pressure pulsations. Flow rate up to 1072 m3/h , solute inlet pressure starting from 450 mbar, maximum outlet temperature 150°C Material: rotor, shaft and housing (steel casting) Material: tooth wheels (18NiCrMo 5)
Temperature: 150 °C (302 °F). Motor Power: 4 kW (5.4 HP). Power Transmission: Belt. Pressure: 0.14 bar (2 psi).