Quote Cart
Strong Scott Solidaire dryer Material of construction SS, with CS outer Jacket. 188" thick. Removable rotor. Outboard bearings.
Type: Dryer- Ribbon & Paddle
Manufacturer: Bepex
Model: CRUJ-400
Condition: Unused
Material: Carbon Steel
Design Capacity: 11.3 m3 (400 ft3)
Operating Capacity: 7.1 m3 (250 ft3)
Continuator, Trough inside dimensions 69" diameter x 195" long, 214 Square foot heating surface. with a dome top cover, 25% of the dome cover has panel coils. The rotor is 18" diameter with 8" stub shafts, packing glands on shaft. outboard bearings. The rotor paddles are hard-faced. The rotor has a chain & sprocket drive, with a Foote Jones gear reducer, 38.7:1 ratio. 12 rpm screw speed, driven by 75 HP, 3/60/460 volt motor. Continuous design with an adjustable discharge weir. Designed for steam heat. If used as a hydrotreator for sludge, machine is rated 5.8 short tons.hr.
Vessel Pressure: 1.03 bar (15 psi). Vessel Temperature: 196.1 °C (385 °F). Jacket Pressure: 13.1 bar (190 psi). Jacket Temperature: 196.1 °C (385 °F). Operational mode: Continuous. Heating Transfer Surface Area: 19.9 m² (214 ft²). Heating Type: Steam. Ribbon Type: Paddles. Agitation Shaft Sealing: Packing.
Type: Dryer- Ribbon & Paddle
Manufacturer: Bepex
Model: CRUJ-400
Condition: Unused
Material: Carbon Steel
Design Capacity: 11.3 m3 (400 ft3)
Operating Capacity: 7.1 m3 (250 ft3)
Continuator, Trough inside dimensions 69" diameter x 195" long, 214 Square foot heating surface. with a dome top cover, 159.5 overall all height. 25% of the dome cover has panel coils. The rotor is 18" diameter with 8" stub shafts, packing glands on shaft. outboard bearings. The rotor paddles are hard-faced. The rotor has a chain & sprocket drive, with a Foote Jones gear reducer, 38.7:1 ratio. 12 rpm screw speed, driven by 75 HP, 3/60/460 volt motor. Continuous design with an adjustable discharge weir. Designed for steam heat. If used as a hydrotreator for sludge, machine is rated 5.8 short tons.hr.
Vessel Pressure: 1.03 bar (15 psi). Vessel Temperature: 196.1 °C (385 °F). Jacket Pressure: 13.1 bar (190 psi). Jacket Temperature: 201.7 °C (395 °F). Operational mode: Continuous. Heating Transfer Surface Area: 19.9 m² (214 ft²). Heating Type: Steam. Ribbon Type: Paddles. Agitation Shaft Sealing: Packing.
Type: Dryer- Ribbon & Paddle
Manufacturer: Bepex
Model: CRUJ-400
Condition: Unused
Material: Carbon Steel
Design Capacity: 11.3 m3 (400 ft3)
Operating Capacity: 7.1 m3 (250 ft3)
Bepex Continuator 214 Square foot heating surface. with a dome top cover, 159.5 overall all height. 25% of the dome cover has panel coils. The rotor is 18" diameter with 8" stub shafts, packing glands on shaft. outboard bearings. The rotor paddles are hard-faced. The rotor has a chain & sprocket drive12 rpm screw speed. Continuous design with an adjustable discharge weir. Designed for steam heat. If used as a hydrotreater for sludge, machine is rated 5.8 short tons.hr.
Vessel Pressure: 1.03 bar (15 psi). Vessel Temperature: 196.1 °C (385 °F). Jacket Pressure: 13.1 bar (190 psi). Jacket Temperature: 196.1 °C (385 °F). Operational mode: Continuous. Heating Transfer Surface Area: 19.9 m² (214 ft²). Heating Type: Steam. Ribbon Type: Paddles. Agitation Shaft Sealing: Packing.