Quote Cart
30 Cu. Ft. Overall size is 44" x 48" X 54" high, with a cone shaped bottom. These bins are stackable and have lugs and fork pockets, for moving by either crane or forklift. Top opening is 22" diameter round, bottom opening is 12' with a manual locking butterfly valve. Designed for moving bulk powders.
Type: Bin
Condition: Used
Material: Stainless Steel 304
Clad: Yes
Capacity Design: 0.3 m3 (10.6 ft3)
Orientation: Vertical
hopper welded top, feed has s/steel rotary lock valve driven by 2-speed motor, 0.5 kw, 3/50/380-420/220-240 volt, 1400 rpm or 0.5kw, 3/60/440-480/250-280 volt, 1690 rpm, openings top 1-200mm (feed), 1-50mm, side 1-50mm, 1-25mm (sensor), bottom 1-250mm, with insulation and cladding
Width: 680 mm (26.8 in). Cone Length: 1,100 mm (43.3 in). Length: 300 mm (11.8 in). Support Type: Lugs.
Type: Bin
Manufacturer: K-Tron
Model: K-module
Condition: Used
Material: Stainless Steel 304
Capacity Design: 0.4 m3 (14.2 ft3)
Orientation: Vertical
agitated weigh feed hopper, clamped flat top, weld coned bottom, agitator driven by 1 HP, 3/50/230 volt, 1715 rpm motor via 195:1 ratio SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, which are mounted on a carbon steel frame
Width: 1,000 mm (39.4 in). Cone Length: 500 mm (19.7 in). Length: 350 mm (13.8 in). Support Type: Lugs.
Type: Bin
Manufacturer: K-Tron
Condition: Used
Material: Stainless Steel 304
Capacity Design: 0.011 m3 (0.39 ft3)
Width: 1,000 mm (39.4 in)
agitated weigh feed hopper clamped flat top, weld coned bottom agitator driven by approximately a 1 HP, 3/50/230 volt, 1715 rpm motor via 195:1 ratio SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, bottom outlet with a screw discharge conveyor, driven by a 1.5 hp, 3/50/180 volt motor, which are mounted on a carbon steel frame with wheels
Cone Length: 540 mm (21.3 in). Length: 370 mm (14.6 in). Support Type: Lugs.
Type: Bin
Manufacturer: K-Tron
Model: K-modular
Condition: Used
Material: Stainless Steel 304
Capacity Design: 0.003 m3 (0.11 ft3)
Width: 600 mm (23.6 in)
agitated weigh feed hopper clamped flat top, weld coned bottom agitator driven by approx 1 HP, 3/50/230 volt, 1715 rpm motor via SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, bottom outlet with a screw discharge conveyor, driven by a 1.5 hp, 3/50/180 volt motor which are mounted on a carbon steel frame with wheels
Cone Length: 400 mm (15.7 in). Length: 300 mm (11.8 in). Support Type: Lugs.