multifunctional spray dryer system, with nozzle type atomization, and baghouse filter. on Zinc Oxide, but can dry other inorganic compounds. This spray dryer is an all welded unit comprised of a chamber and cone with the following dimensions: 3.4m diameter x 4.8m straight side x 2.3m coned bottom, 700mm x 400mm access door, chamber with pneumatic hammers for helping powder discharge, Drying gas is supplied by a Niro direct gas fired air heater with Maxon airflow burner type NP-35.5, fabrication # 472, liquid petroleum gas fired, 334 kw nominal load, gas supply pressure 8mbar (min), 21 mbar (max). Product/ drying gases are separated by a bag filter: a 31 square meter (339 square feet) The system also includes the following optional accessories. (1) s/steel centrifugal spray pump, manufactured by Pasilac, type K2-3805-185, serial # 137868, driven by an electric motor. (1) 1700 liter 304 s/steel feed tank with clamp on agitator, open top, weld coned bottom, 1.5m diameter x 1000mm straight side, air driven agitator, tank mounted on (4) carbon steel legs. (1)600mm diameter s/steel single deck vibratory sieve, type VSC600-1-SS, manufactured by Vibrodynamics, serial # 664P driven by 0.5 kw, 3/50/380/420 volt, 1440 rpm motor. (1) s/steel 3110 m3/hr @ 160 deg C fan, manufactured by B.Bille, type HT35-530, fan speed 2790 rpm, 11 kw, 2930 rpm motor. (1) Feluwa high pressure feed pump, type SGL-232/3-K50-M190-ZW, serial # 21/26322, 0.47 m3/hr., 1.5 kw, 1400 rpm.