1.4571/HII falling film evaporator carbon steel shell internal; -1/9 bar @ 250 ° C jacket, internal 1291 l, jacket 1.020 l
Type: Evaporator
Subtype: Rising/Falling Film
Manufacturer: Kleiser Gmbh
Condition: Used
Material: Stainless Steel Austenitic
Total Heat Transfer Surface Area: 90 m² (968.8 ft²)
Pressure: 6 bar (87 psi)
both sides , 4.685 l internal, 1.100 l jacket total height 8.550 mm
Temperature: 200 °C (392 °F). Vacuum: Yes.
Type: Evaporator
Subtype: Rising/Falling Film
Manufacturer: Kleiser Gmbh
Condition: Used
Material: Stainless Steel Austenitic
Evaporation Rate: 6,700 kg/h (14,771 lb/h)
Orientation: Vertical
single effect vertical falling film evaporator jacket -1/6 bar @ 200 degrees C (1100 liter), 6.7 m3/hour evaporation rate Fabrik #3981 single pass tubeside, 316Ti (1.4571) stainless steel tubesheets, 800mm diameter 316Ti stainless steel shell with expansion joint, 7m overall length, (2) 316Ti stainless steel (1.4571) dished heads evaporator with (1) 316Ti stainless steel (1.4571) expansion boiler, 1227 liter, 800mm diameter x 2250mm, pressure and vacuum resistant, manual valves and control valves
Pressure: 6 bar (87 psi). Temperature: 200 °C (392 °F). Vacuum: Yes.
Type: Evaporator
Subtype: Rising/Falling Film
Manufacturer: Kleiser Gmbh
Condition: Used
Material: Stainless Steel 316
Evaporation Rate: 9,400 kg/h (20,723 lb/h)
Orientation: Vertical
single effect falling film evaporator pressure internal -1/6 bar @ 200 degrees C (1291 liter), jacket -1/6 bar @ 200 degrees C (1020 liter) 9.4 m3/hour evaporation rate single pass tubeside, 316Ti (1.4571) stainless steel tubesheets, 700mm diameter 316Ti stainless steel (1.4571) shell with expansion joint, 7250mm overall length, (1) 316Ti stainless steel (1.4571) dished head, (1) 316Ti stainless steel (1.4571) bonnet head evaporator with (1) 316Ti stainless steel (1.4571) expansion boiler, 1227 liter, 800mm diameter x 2250mm, pressure and vacuum resistant, manual valves and control valves
Pressure: 6 bar (87 psi). Temperature: 200 °C (392 °F). Vacuum: Yes.
Type: Evaporator
Subtype: Rising/Falling Film
Manufacturer: Wiegand/Becker
Condition: Used
Material: Stainless Steel Austenitic
Clad: Yes
Evaporation Rate: 100 kg/h (220.5 lb/h)
Total Heat Transfer Surface Area: 3.8 m² (40.6 ft²)
single effect falling film evaporator system, product feed approximately 300 kg/hr @ 20 degrees C, product output approximately 200 kg/hr @ 50 degrees C, system includes:
shell -1/3.2 bar @ 150 degrees C (66 liter),
220mm diameter 316 stainless steel (1.4571) shell, with expansion bellows, insulated and clad,
(1) 300 liter 316 stainless steel (1.4571) vertical jacketed separator vessel, manufactured by Wiegand/Becker, pressure internal -1/3.2 bar @ 150 degrees C, jacket: -1/3.2 bar @ 150 degrees C, 508mm diameter x 1500mm straight side
insulated and clad,
(1) 316 stainless steel (1.4571) tube, shell and head vertical preheater/condenser,
manufactured by Wiegand/Becker, serial #3681,
pressure tubeside -1/3.2 bar @ 150 degrees C (46 liter), shell -1/3.2 bar @ 150 degrees C, (5.6 liter), 140mm diameter x 4m long 316 stainless steel shell, (2) 316 stainless steel (1.4571) bolt dished heads, mounted on lugs, insulated and clad,
(1) 316 stainless steel(1.4571) tube, shell and head vertical condenser, manufactured by Wiegand/Becker,
serial #3682, pressure tubeside -1/3.2 bar @ 150 degrees C (61 liter), shell -1/3.2 bar @ 150 degrees C (25 liter), 168mm diameter x 3944mm long 316 stainless steel shell. (2) 316 stainless steel (1.4571) flat heads, Mounted on lugs, insulated and clad,
(3) 316 stainless steel(1.4571) centrifugal circulation pumps, manufactured by Fristam/Stamp, (1) pump is a type FP712/120KF and (2) are type FP712/130KF, 1.1 kW/2900 rpm, openings DN40/PN16 inflow and (1) DN40/PN16 outlet
driven by 1.1 kW, 220-380V/50 Hz/ 2840 rpm, ex proof (T3) motor, mounted on baseplate;
Other ancillaries include, carbon steel framework, control panel, miscellaneous stainless steel pipework,
Pressure: 3.2 bar (46.4 psi). Temperature: 150 °C (302 °F). Vacuum: Yes.