Quote Cart
nternal surfaces have a #4 finish. Bottom head has 11.1 turns 4" half pipe, straight side have three zones 6" half pipe, at 20 turns (top), 26 turns (middle) and 24 turns (bottom) . Four internal baffles side wall mounted 14" wide x 38'6" long bolted 2.25" off the wall mounted at 90 degrees apart.
Agitator drive is 600 Hp variable speed Chemineer right angle mixer drive, with three sets of 4 blade impellers, with a Chesterton 222 style mechanical seal. Agitator shaft runs in a steady bearing at bottom of the tank.
Type: Fermenter
Condition: Used
Material: Stainless Steel 316
Capacity: 340 L (89.8 gal)
Agitation: Yes
Model ESRV agitator drive, 2.55:1 ratio. bottom driven by 4 HP, 1440 rpm motor.
Diameter: 457.2 mm (18 in). Length: 2,057 mm (81 in). Orientation: Vertical.
Type: Fermenter
Manufacturer: B.Braun + Diessel Biotech GMBH
Model: V20D
Condition: Used
Material: Stainless Steel 316
Capacity: 20 L (5.3 gal)
Agitation: Yes
Stainless steel jacket on straight side only, 4-blade marine agitator, underdriven by 0.25 kw, 3/50/220/380 volt, 2800 rpm motor via gearbox, level glass on straight side,
Diameter: 200 mm (7.9 in). Length: 520 mm (20.5 in). Pressure: 3 bar (43.5 psi). Temperature: 150 °C (302 °F). Vacuum: Yes. Jacket Pressure: 3 bar (43.5 psi). Jacket Temperature: 150 °C (302 °F).
Type: Fermenter
Manufacturer: Tankki OY
Condition: Used
Material: Stainless Steel 316
Capacity: 12,500 L (3,303 gal)
Agitation: Yes
fermenter Tankki OY agitator drive, serial # 8420, driven by Sew-Eurodrive, type FAF80-DV160-M4, 11kw, 3/50/400/690 volt, 1440-105 rpm geared motor, (3) 6-blade turbine type agitators, dry running mechanical seal,
Diameter: 2,200 mm (86.6 in). Length: 2,500 mm (98.4 in). Orientation: Vertical. Pressure: 4 bar (58 psi). Temperature: 160 °C (320 °F). Vacuum: Yes. Jacket Pressure: 4 bar (58 psi). Jacket Temperature: 160 °C (320 °F).
Type: Fermenter
Manufacturer: Biolafitte
Condition: Used
Material: Stainless Steel 316
Capacity: 430 L (113.6 gal)
Agitation: Yes
321 stainless steel jacket on straight side only, 4-blade turbine impellor, under belt driven by 7.5 kw, 3 phase, 50Hz, 380/660 volt, 1450/118/472 rpm SEW-Usocome geared motor, Burgmann mechanical seal, includes pipework, valves, filter, pump.
Diameter: 650 mm (25.6 in). Length: 1,080 mm (42.5 in). Pressure: 3 bar (43.5 psi). Jacket MOC: Stainless Steel 321.