Stainless Steel 304 Szgvari 1 Shot And Sand Mill - IPP# 92512

Type: Mill

Subtype: Shot And Sand

Manufacturer: FrymaKoruma

Model: MS50

Condition: Used

Material: Stainless Steel 304

Drive Power: 54.4 kW (73 HP)

Pressure: 4 bar (58 psi)

coBall mill This production size stirrer-bead mill is designed for the finest grinding of suspensions and high viscous products down to Nano- Range. This mill has the following specifications: Throughput; 0.7-2.2 gpm, Pressure resistance; 58 psi, Grinding chamber volume; 2 Gallons, Rotor driving capacity; 49-73 hp, weight 3850 lbs.
Controls are 110 volt, Machine 460 volt. Air humidity from 0-80%, Ambient air; As dust free as possible. Mechanical seal on grinding chamber

Temperature: 90 °C (194 °F).

Type: Mill

Subtype: Shot And Sand

Manufacturer: FrymaKoruma

Model: MS12

Condition: Used

Material: Stainless Steel 304

Drive Power: 3 kW (4 HP)

Pressure: 2 bar (29 psi)

This lab size stirrer-bead mill is designed for the finest grinding of suspensions and high viscous products down to Nano- Range This mill has the following specifications: Throughput; 0.044-0.132 gpm, Pressure resistance;29 psi, Grinding chamber volume; 0.13 Gallons,
Rotor driving capacity; 4 hp, weight 353 lbs.
Controls are 110volt, Machine 460 volt.
Operating conditions: Temperature; from 0-90 degrees C. Air humidity from 0-80%, Ambient air; As dust free as possible. Mechanical seal on grinding chamber

Temperature: 90 °C (194 °F).

Type: Mill

Subtype: Shot And Sand

Manufacturer: Asada Machine Works

Condition: Used

Material: Stainless Steel 304

Capacity (Design): 0.22 m3 (7.8 ft3)

Diameter: 444.5 mm (17.5 in)

Dual Mounted jacketed, Mecha Gaper grain mills The design is two seperated complete mill mounted on a common stand. with UL label Closed design suitable for solvent based coatings Each chamber has a SS cooling jacket and a SS internal liner designed for easy replacement/maintenance Disks are UHMW (non metalic high wear material).
Bottom inlet, top discharge, with top sample port, all with sanitary style fittings.

Type: Mill

Subtype: Shot And Sand

Condition: Used

Material: Stainless Steel 304

Diameter: 165.1 mm (6.5 in)

Drive Power: 14.9 kW (20 HP)

4-station Premier type small-media sandmill system. Consists of (4) 6 1/2" ID x 12" 304SS closed head horiz chambers mtd on common unit. Each chamber has rotary gear pump mtd underneath. W/controls and gauges.