Quote
Quote Cart
clear all items

Carbon Steel Kato A261820000 Power Generator - IPP# 210492

  • Carbon Steel Kato A261820000 Power Generator - IPP# 210492 Carbon Steel Kato A261820000 Power Generator - IPP# 210492
  • Carbon Steel Kato A261820000 Power Generator - IPP# 210492 Carbon Steel Kato A261820000 Power Generator - IPP# 210492
  • Carbon Steel Kato A261820000 Power Generator - IPP# 210492 Carbon Steel Kato A261820000 Power Generator - IPP# 210492
  • Carbon Steel Kato A261820000 Power Generator - IPP# 210492
  • Carbon Steel Kato A261820000 Power Generator - IPP# 210492
  • Carbon Steel Kato A261820000 Power Generator - IPP# 210492
Overview
Power Generator
Kato
A261820000
Used
Carbon Steel
Capacity
0.28 MW
Other Specifications
428.5 amp
480
60
3
Steam
Yes
Drive
283 kW (379.5 HP)
Dimensions
3,450 mm (136.7 in)
1,000 mm (40 in)
1,050 mm (41 in)

Skid mounted turbine generator package This set is designed to recover the work available in high pressure steam that would normally be lost when the steam passes through a pressure reducing valve The system consists of a backpressure steam turbine driving a synchronous generator mounted on a skid The control system automatically controls the flow of the steam through the turbine, thereby controlling the pressure in the low pressure header. The major components are as follows: Turbine by Coppus Engineering, Model # RLHA-19, Serial # 94H9489. This is a single-stage, impulse type turbine. Capable of delivering 404 HP at 3600 rpm, designed for 23,075 lbs. /hr, of dry saturated steam at 210 psi.
Generator is manufactured by Kato, and is high efficiency design, synchronous, and brushless, and revolving field style ; Type: 26182 Operating at 3600 rpm, delivering 480 volt, 3 ph, 60 Hz, 283 kW of output. Alternator kW continuous, 285, 60 Hz, 277/480v, 428.5 amps. Exciter Arm "C" # 3007-10, Exciter Field "C" # 18058-10. The control panel and circuit breaker handle synchronization, metering, protection and other functions.

Similar Equipment

Carbon Steel Elliott BYRH-UG Power Generator

Type: Power Generator

Manufacturer: Elliott

Model: BYRH-UG

Condition: Used

Material: Carbon Steel

Capacity: 1.01 MW

Amperage: 163 amp

Elliott steam turbine generator set with Elliott turbines Single stage back pressure style units. We believe this unit has zero run hours since the overhaul. Engine, gearbox and generator are mounted in a common skid. Rated Power - 1350HP/1007kW; Rated Turbine Speed - 5750 RPM; Rated Inlet Steam Pressure - Gauge - 599 PSI; Rated Steam Temperature - 750 Deg F; Rated Exhaust Pressure - 155 PSI. Gear Drive is a model # C4 R4, Serial # B102145C-G2, Rated power 1350, Service factor 1.66, High speed shaft;5750, Low speed shaft;1815 , Tag # 802654 C4 2625. Alternater is built by BBC (Brown Boveri) Serial # C36-A076-101, Drive end bearing 6322/C3, opposite drive end bearing 6320/C3. Time rated continuous; Frame # 717, enclosure is drip proof; rated ambient temp. 40 degrees C. With twin Amtek oil coolers and 1.5 hp oil pump.

Voltage: 4,160. Cycle: 60. Phase: 3. Drive Power: 1,000 kW (1,350 HP). Power Transmission: Gear. Powered By: Steam. Controls: Yes.

10.2 MW Ideal Electric Generator designed to be driven by a steam turbine.

Type: Power Generator

Manufacturer: Ideal

Condition: Used

Material: Carbon Steel

Capacity: 10.2 MW

Amperage: 1,600 amp

  • Can be used with Terry condensing turbine IPP stock # 212616.
  • Ideal Generator. The generator is an electric, four pole synchronous AC brushless generator.
  • Horizontal design, two bearing style, with single shaft extension.
  • Windings intended to be WYE with full six leads, brought out, and equipped with damper windings to facilitate parallel operation with other generators.
  • Bearings are sleeve type and electrically insulated and forced oil is fed from an outside source. Bearings are also equipped with dial thermometers, return sight flow glass', and RTD protection. The bearings are also equipped with vibration probes in an X-Y orientation.
  • Space heaters are also included and operate at 2400 watts, 120 vac, 60 hz.

Voltage: 4,160. Cycle: 60. Phase: 3. Power Transmission: Direct Coupled. Powered By: Steam.

Caterpillar G3516 800KW Power Generator

Type: Power Generator

Manufacturer: Caterpillar Inc

Model: G3516

Condition: Used

Material: Carbon Steel

Capacity: 0.8 MW

Amperage: 1,200 amp

Natural Gas Generator Set Number 20502 Cat Engine Model G3516 SITA SN 3RC00095,1085HP The drivers are V-16, Spark ignition, Turbo charged and after cooled. These machines have been serviced by the OEM since start up and until shut down Operating speed 1200RPMs4 wire, Exciter 27V/80A, max temperature rise 115°C by resistance. Paired with a vertical heat exchanger 5’3”diax12’H

Voltage: 480. Cycle: 60. Phase: 3. Operational Hours: 162,430. Drive Power: 809 kW (1,100 HP). Fuel Type: Natural Gas. Power Transmission: Direct Coupled. Powered By: Engine. Engine Manufacturer: Caterpillar. Engine Model Number: G3516. Drive engine number of cylinders: 16. Engine Horsepower: 1,085. Batteries: Yes. Battery Charger: Yes.

Caterpillar G3516 800KW Power Generator

Type: Power Generator

Manufacturer: Caterpillar Inc

Model: G3516

Condition: Used

Material: Carbon Steel

Capacity: 0.8 MW

Amperage: 1,200 amp

Natural Gas Electric Generator Set Number 20502Cat Engine Model G3516 SITA SN 3RC00088,1085HPThe drivers are V-16, Spark ignition, Turbo charged and after cooled. These machines have been serviced by the OEM since start up and until shut downOperating speed 1200RPMs4 wire, Exciter 27V/80A, max temperature rise 115°C by resistance. Paired with a vertical heat exchanger 5’3”diax12’H

Voltage: 480. Cycle: 60. Phase: 3. Operational Hours: 160,295. Drive Power: 800 kW (1,050 HP). Fuel Type: Nat_Gas. Engine Manufacturer: Caterpillar. Engine Model Number: G3516. Drive engine number of cylinders: 16. Engine Horsepower: 1,085. Batteries: Yes. Battery Charger: Yes. Controls: Yes.