Stainless Steel 304 Dryer-Wyssmont 2,130 mm (83.9 in) For Sale - IPP# 89433

Type: Dryer-Wyssmont

Manufacturer: Krauss Maffei

Model: VTT20/11-2/90-4

Condition: Used

Material: Stainless Steel 316L

Diameter: 63,500 mm (2,500 in)

Number of Trays: 11

316L stainless steel (1.4571/1.4435) continuous vacuum plate dryer, 27.5 square meter heat surface area, manufactured by Krauss Maffei, fabrik #3608, KM order #365297/2/001, vessel 20 mbar @ 95 degrees C (11820 liter), (6) 1750mm diameter & (5) 1930mm diameter 316Ti stainless steel (1.4571) steam heated plates, each plate fitted with a scraper , plates 6 & 8 fitted with a crushing roller, vessel 2.5m diameter x 1881mm straight side, bolt dished top, bolt truncated flat bottom, under driven by 1.1kw, 3/50/415 volt, 700 rpm Exd 11B T5 motor via a vari-speed Lenza gearbox, 1160/1600-10.5/1.71 rpm, 1:6 ratio, packed gland on shaft, Openings: top : 1-500mm manway, 1-400mm (vacuum), 1-150mm (product inlet), 2-50mm (standby’s), straight side: 4-500mm manways, 1-125mm (heating inlet plate 3 & 4), 1-65mm (heating inlet plate 1 & 2), 2-50mm (standby & vacuum gauge), 1-40mm (heating inlet plate 11), bottom side: 2-175mm (hand holes), 1-100mm (level feeler), 2-65mm (heating outlet plate 1,2,3 & 10), 1-40mm (heating outlet plate 11), bottom: 1-200mm (product outlet with blind cover), 1-150mm (product outlet, Product inlet and outlet with a stainless steel rotary lock valve, driven by 2.2kw, 3/50/415 volt, 2850 rpm Exd 11B T5 motor via a vari-speed gearbox, 2800/0 to 1058 rpm, steam heated shaft with rotary union joint process data 55kg/hour of final product, initial moisture 65% rel. to 35% purity, residual moisture 35% rel. to 65% purity, density (moist) 392-471 kg/m3, density (dry) 245-318 kg/m3, drying temperature 65 degrees C, drying time 45-65 minutes, pressure in dryer 10 bar, mass flow of wet material 55 x 0.65 : 0.35 = 102 kg/hour, volume of wet material 102 : (0.392...0.471) = 260 – 217 liter/hour

Shelves MOC: Stainless Steel 316. Temperature: 95 °C (203 °F).

Type: Dryer-Wyssmont

Manufacturer: Krauss Maffei

Model: TTB-20/8

Condition: Used

Material: Stainless Steel 316

Diameter: 1,926 mm (75.8 in)

Height: 1,424 mm (56.1 in)

20.2 square meter, plate dryer/cooler, Drying surface: 188 sq ft (17.5 sq meter); cooling surface: 29 sq ft (2.7 sq meter). Initial moisture: 40%, residual moisture: 0.5%; drying temp: 100-105 degrees C, drying time 38.5 minutes; cooling temperature: 35 degrees C, cooling time: 5.5 mins. (8) plates cored for steam heating, 1763mm/1926mm diameter. (2) raker agitators on each plate, (2) heater banks. Max working pressure: 11 bar. Unit direct driven by Lonze varispeed gearbox, belt driven by 1.5 KW, 3/50/415 volt, 1440 rpm flameproof motor. Chamber size: 2038mm diameter x 1424mm high. All wetted parts are 316 stainless steel. (2) 1345mm high x 888mm wide inspection doors with (2) 300mm x 228mm sight glasses on each door. Openings: 1-200mm discharge, 16-37mm plate inlets/outlets, 4-25mm on heater banks, 1-228mm dust outlet, 1-300mm feed.

Number of Trays: 8. Shelves MOC: Stainless Steel 316. Temperature: 105 °C (221 °F).

Type: Dryer-Wyssmont

Manufacturer: Krauss Maffei

Model: TTB20/16

Condition: Used

Material: Stainless Steel Other

Diameter: 1,930 mm (76 in)

Height: 3,048 mm (120 in)

40.3 sq meter turbo dryer CS dryer housing 6'4" dia x 10' hig Trays are under driven, with a gear drive, requires a 2HP motor( none with unit)

Tray Diameter: 1,524 mm (60 in). Number of Trays: 16. Shelves MOC: Stainless Steel Other. Orientation: Vertical.

Type: Dryer-Wyssmont

Manufacturer: Krauss Maffei

Model: TTB27/35

Condition: Used

Material: Stainless Steel 316

Diameter: 4,343 mm (171 in)

Height: 8,800 mm (346.5 in)

175 square meter (1,883 square feet), plate dryer. 316 stainless steel lined jacket housing, Heating coil 4 bar (58 psi), 6 bar test pressure. 11KW (15 HP) drive motor with reduction gearbox. Outside diameter is 4350mm (14'3" ).

Tray Diameter: 2,743 mm (108 in). Number of Trays: 33. Temperature: 110 °C (230 °F).