belt flaker, with Accu-Drop Pastillator and Variable Speed Drive Belt system is 60" wide x 75 feet long. With six (138" x 59" x 5'5") water collectors 190 Gallon rated for 55 degrees F Six water spray systems, 116" x 2" OD. Hot melt is feed through a rotoform with steam to keep wax in a liquid state. Shell side(product side) rated for 400 degrees F, tube side, (steam) rated for 300-350 degrees F. Rotoform is 59" long x 3.25" diameter Main Belt is driven by a Euro drive variable-speed with a helical reducer 3 HP gear ratio 34.26:1 Overall belt speed is from 25 FPM up to 125 FPM. (This can also be adjusted with different sprockets.) Overall shipping dimensions are 75" wide x 66" tall (to top of mounted pastillator) x 75' long. Belt thickness is 0.040", belt height is 48". Flaker Width: 1,524 mm (60 in). For Belt: Length of Flaker: 20,117 mm (792 in). Area of Flaker: 30.7 m² (330 ft²). Orientation: Horizontal. Single Belt or Double Belt ?: Single. Flaker Feed Type: Heated Refeed Pastillator.
belt flaker, with Accu-Drop Pastillator and Variable Speed Drive Belt system is 60" wide x 75 feet long. With six (138" x 59" x 5'5") water collectors 190 Gallons rated for 55 degrees F. Six water spray systems, 116" x 2" OD. Hot melt is feed through a rotoform, with steam to keep hot melt in a liquid state. Shell side (Product side) rated for 400 degrees F, tube side, (steam) rated for 300-350 degrees F. Rotoform is 59" long x 3.25" diameter Main Belt is driven by a Euro drive variable-speed, with a helical reducer 3 HP gear ratio 34.26:1 Overall belt speed is from 25 FPM up to 125 FPM. (This can also be adjusted with different sprockets.) 1750 rpm. 2.77 HP, service factor 1 with output torque 892. The rated temperature range is 51-110 degrees F. Driven by a 1 hp AC motor, continuous duty TEFC. Model # DF26DT1001.54, serial # 88075 1570.07. Flaker Width: 1,524 mm (60 in). For Belt: Length of Flaker: 20,117 mm (792 in). Area of Flaker: 30.7 m² (330 ft²). Orientation: Horizontal. Single Belt or Double Belt ?: Single. Flaker Feed Type: Heated Refeed Pastillator.
Universal Twin Cylinder 12" x 8" lab sized dryer, flaker. Flaker Width: 304.8 mm (12 in). For Belt: Length of Flaker: 203.2 mm (8 in). Area of Flaker: 0.19 m² (2.1 ft²). Orientation: Horizontal. Flaker Feed Type: Submerged Feed Roll. Scraper: Yes. Scraper Details: Knife type Nip.
with Type ZN stainless steel dosing system (tube needle system) can be heated rated 100 to 200 KG/Hr Unit has an endless belt 1.2 meter wide, 1mm thick,x 11.14 meter total length, 4 Meter working area with 1.4541SS (321SS) spray nozzles for belt cooling Unit has a CS frame covered with aluminum Flaker Width: 1,200 mm (47.2 in). For Belt: Length of Flaker: 4,000 mm (157.5 in). Area of Flaker: 4.8 m² (51.7 ft²). Orientation: Horizontal. Single Belt or Double Belt ?: Single.
1.5m wide x 24.85m long rotoform cooling conveyor/belt Drawing Number 6530. 5m long hot water section 17.5m cooling water section Cooling water capacity: 185 GPM @ 30 psi, Hot water zone has 16 sprays x 4 runs x 0.71 gpm (45.4 gpm), Cold water zone has 49 sprays x 4 runs x 0.71 gpm (139.1 gpm), 900mm diameter tension drum, 900mm diameter drive drum andvik Dropformer feed unit with hot oil heated weir, chain driven by 0.75 KW, 3/50/415 volt motor via varispeed gearbox. brass knife discharge, carbon steel support frame with sump tanks mounted under the belt, Flaker includes a discharge vibratory shaker for size classifacation, (3) Sihi Centrifugal cooling water pumps, Russel Finex inline water filter, Flaker Width: 1,500 mm (59.1 in). For Belt: Length of Flaker: 24,850 mm (978.3 in). Area of Flaker: 37 m² (398.3 ft²). Orientation: Horizontal. Single Belt or Double Belt ?: Single. Flaker Feed Type: Standard Drop Pastillator. Number of Cooling Zones for Belt: 4. Nozzles per Cooling Zone: 49. Scraper: Yes. Scraper Details: Discharge scraper - Brass MOC.
belt flaker 16' long drying section Flaker Width: 762 mm (30 in). For Belt: Length of Flaker: 4,877 mm (192 in). Area of Flaker: 3.7 m² (40 ft²). Orientation: Horizontal. Single Belt or Double Belt ?: Single.
508mm diameter x 508mm face pilot size 316 stainless steel drum flaker 316 stainless steel jacketed feed pan with manual raise/lower mechanism carbon steel knife with a copper replaceable blade and manual adjustment 304 stainless steel discharge chute, drum openings: 2-40mm, feed pan openings: 2-25mm Flaker Width: 508 mm (20 in). Scraper: Yes. Scraper Details: Carbon steel with copper replaceable blade and manual adjustment.
chrome plate drum only For use with Gouda drum flaker
Single drum flaker Grooved drums, 1/8" groove every 1" 316SS vac chamber housing. W/spare drum Roll face is grooved on 1' spacings Flaker Width: 1,524 mm (60 in). Area of Flaker: 21.2 m² (228 ft²). Orientation: Horizontal.
Stokes 2-roll chrome plated flaker Has cored rollers for heating and cooling Has knife discharge Fixed roll spacing Masters gearhead varispeed motor UL labelled motor Flaker Width: 203.2 mm (8 in). Area of Flaker: 0.65 m² (7 ft²). Scraper: Yes.
chrome plated drum only Cast iron construction Flaker Width: 1,067 mm (42 in). Area of Flaker: 7.9 m² (85 ft²). Orientation: Horizontal.
chrome plated single drum flaker Drum pressure 0.42 bar DC thyristor controlled varispeed drive. Roll speed 10-100 rpm. Heating low pressure steam system of 0.1 bar. Doctor manual adjustable knife made of carbon steel. Drum gear driven by 4 KW, 3/50/380 volt 1440 rpm flameproof motor Drum speed 2-18 rpm. Drum and applicator roll cored for steam/cooling Flaker Width: 28 mm (1.1 in). Area of Flaker: 26 m² (279.9 ft²). Orientation: Horizontal. Scraper: Yes. Scraper Details: manual adjustable, made of carbon steel.
Pharmaceutical grade Top of belt is steam heated bottom is chilled water cooled variable speed, 0.75 kW 3/50/220/380V System equipped with SIHI cooling water vacuum pump driven by 2.5 kW 3/50/380V, 1430 RPM motor. Flaker Width: 1,200 mm (47.2 in). For Belt: Length of Flaker: 2,000 mm (78.7 in). Area of Flaker: 2.4 m² (25.8 ft²). Orientation: Horizontal. Single Belt or Double Belt ?: Single.
ZN stainless steel dosing system (tube needle system) can be heated, rated 100 to 200 KG/Hr. Unit has an endless belt Unit has an endless belt, 1.2 meter wide, 1mm thick,x 11.14 meter total length, 4 Meter working area with 1.4541SS (321SS) spray nozzles for belt cooling Unit has a CS frame covered with aluminum. Flaker Width: 1,200 mm (47.2 in). For Belt: Length of Flaker: 4,000 mm (157.5 in). Area of Flaker: 4.8 m² (51.7 ft²). Orientation: Horizontal. Single Belt or Double Belt ?: Single.
Pastillator with type: ZN stainless steel dosing system (tube needle system) can be heated, rated: 100 to 200 kg/hr, unit has an endless belt 1.2 meter wide, 1 mm thick x 11.14 meter total length 4 meter working area, with 1.4541 s/steel (321s/steel) spray nozzles for belt cooling Unit has a c/steel frame covered with aluminum. Flaker Width: 1,200 mm (47.2 in). For Belt: Length of Flaker: 4,000 mm (157.5 in). Area of Flaker: 4.8 m² (51.7 ft²). Orientation: Horizontal. Single Belt or Double Belt ?: Single.
with (2) 20” wide water cooled chrome plated calender rolls on the belt feed end to smooth out the hot product dropping onto the chill belt Rolls are driven by a varispeed drive, one roll is 7" diameter, the other is 16" diameter Material drops onto a stainless steel water cooled belt (similar to a Sandvick). With lump breaker on the discharge end of belt to break up cooled product Chipped product drops into a 6" SS rotary airlock valve then is pneumatically conveyed to a pre-breaker. Flaker Width: 609.6 mm (24 in). For Belt: Length of Flaker: 4,267 mm (168 in). Area of Flaker: 2.6 m² (28 ft²). Orientation: Inclined. Single Belt or Double Belt ?: Single.
(2) 20” wide water cooled Rolls are driven by a varispeed drive, one roll is 7" diameter, the other is 16" diameter Material drops onto a stainless steel water cooled belt (similar to a Sandvick). With lump breaker on the discharge end of belt to break up cooled product Flaker Width: 609.6 mm (24 in). For Belt: Length of Flaker: 4,267 mm (168 in). Area of Flaker: 2.6 m² (28 ft²). Orientation: Inclined. Single Belt or Double Belt ?: Single.
single drum flaker, with dip tray working pressure 6.9 bar max, design pressure 6.9 bar @ 170 degrees C steam heated drum with rotary unions drum speed variable from 0.7 to 7 rpm, adjustable knife discharge with removeable plastic blades (missing) Flaker Width: 1,538 mm (60.6 in). Area of Flaker: 228 m² (2,454 ft²). Orientation: Horizontal.
approx 28.8 square meter 301 (NICRO 12.1)/304 stainless steel enclosed horizontal belt flaker with Pastillator 1.5m wide x 18000mm cooling length 301 (NICRO 12.1) stainless steel belt 19250mm belt length between center of rolls 38500mm total length of belt 1mm belt thickness, (3) cooling zones, zone 1 = 5.5m long (3 bar @ 5-9 degrees C), zone 2 = 6m long (3 bar @ 5-9 degrees C), zone 3 = 6.5m long (3 bar @ 5-9 degrees C), (179) plastic cooling nozzles, (2) 800mm wide 304 stainless steel drums belt enclosed in a 304 stainless steel housing, pneumatic operated belt tensioner, belt with bakelized fiber scraper blades (1) 120mm diameter x 1.4m wide 304 stainless steel RollDrop pastillator for distributing the liquid drops onto the cooling belt, 8mm toothed rotor pitch, type 3 x 1mm, comb material TEKAPEEK, 105 degrees C Pastillator with pneumatic operated raise/lower mechanism, belt with pneumatic operated knife discharge with a brass blade, 304 stainless steel water trays, built on controls, Thermo Scientific model MINI-11-101F weight integrator, emergency stop button and pull cord, all mounted on a Galvanised carbon steel frame, approx 20600mm total length of flaker, (1) discharge belt conveyor, Pastillator description: The product is fed at controlled temperature onto a roller rotor, whose rim is designed with teeth having regular shape and pitch. The liquid product slips constantly between the teeth pattern; drops are gathering on the back of every tooth, thanks to the complementary comb in touch with the toothed rotor. The formed drops are then deposited on the cooled steel belt, thanks to the centrifugal and gravitational force, generating simultaneously pastilles form. Flaker Width: 1,500 mm (59.1 in). For Belt: Length of Flaker: 18,000 mm (708.7 in). Area of Flaker: 28.8 m² (310 ft²). Orientation: Horizontal. Single Belt or Double Belt ?: Single. Flaker Feed Type: Standard Drop Pastillator. Number of Cooling Zones for Belt: 3. Nozzles per Cooling Zone: 60. Scraper: Yes. Scraper Details: bakelized fiber.
30" (800mm) dia x 40" (1000mm) long long chrome plate cast iron single drum flaker Totally enclosed in SS casing w/MS ribbing (not vac rated) Roll surface area: 0.5026 sq meter Fitted w/an unused replacement drum. New main roll bearings made in phosphor bronze in half bush arrangement. Applicator roll re-ground and re-chromed to original dia and Ra surface. Complete w/applicator tray. No motor or gearboxes w/this unit. Flaker Width: 800 mm (31.5 in). For Belt: Length of Flaker: 1,000 mm (39.4 in). Area of Flaker: 0.5 m² (5.4 ft²). Orientation: Horizontal.
face chrome plated single drum flaker/dryer Drum working pressure 5.5 bar, speed 3 to 21 rpm, cored for steam/hot oil heating Flaker Width: 300 mm (11.8 in). Area of Flaker: 1 m² (10.8 ft²). Orientation: Horizontal.
drum flaker/dryer Single drum design Drum and applicator roll cored for steam heating Drum driven by Carter gearbox, Size MF14/100340 2.71 KW @ 960 rpm belt driven by 3 KW, 3/50/415 volt, 700 rpm flameproof motor Applicator roll driven by Croft varispeed drive 316 stainless steel knife discharge with pneumatic adjustment 316 stainless steel drip tray with 316 stainless steel fume hood Openings: hood (2) 52" x 14" plastic inspection doors, 1-8"; tray 3-1". Flaker Width: 600 mm (23.6 in). Area of Flaker: 2.8 m² (30.4 ft²). Orientation: Horizontal. Scraper: Yes. Scraper Details: 316 stainless steel knife discharge with pneumatic adjustment.
301/321/316 stainless steel pilot scale horizontal belt flaker system with a pastillator size 300 x 4000mm fabrik #02.331 CE #2.02032, 321 stainless steel belt is driven by a 2.2kw motor via a 1.35kw 316 stainless steel top housing, belt tension mechanism, manually adjustable discharge scraper, belt with a 1.8 m3/hour 321 stainless steel cooling water system with 6-spray nozzles mounted on a carbon steel frame and is a stand alone unit, system also includes: (1) top mounted 321 stainless steel pastillator (drop former) with extension device for lateral retraction mechanism for cleaning 15-nozzles (1-row of 8, 1-row of 7), (1) electrically heated distribution tray (1) 0.06 m3/hour @ 80 to 100 degrees C product feed pump