attritor Open top with welded cone bottom Charge is 5/16" chrome plated steel (52100) shot Operating liquid level is 185 gallons Agitation is by a two speed Reliance 25/8.3 hp, 1800/600 rpm AC motor through a Sym-Cyclo gearbox With front side door for media change Motor & drive on trolley for shaft & media changing Insulated Capacity (Design): 1.14 m3 (40.1 ft3). Diameter: 1,067 mm (42 in). Drive RPM: 51. Powered By: Electric.

attritor Open top with welded cone bottom. Charge is 5/16" chrome plated steel (52100) shot. Operating liquid level is 185 gallons. Agitation is by a two speed Reliance 25/8.3 hp, 1800/600 rpm,
AC motor through a Sym-Cyclo gearbox. With front side door for media change Motor & drive on trolley for shaft & media changing. Insulated. Capacity (Design): 1.14 m3 (40.1 ft3). Diameter: 1,067 mm (42 in). Drive RPM: 51. Powered By: Electric.

Series 2000 Type: DRS2000/5 Type 139 All piping and support equipment stainless steel. Mill and motor mounted on stainless steel base with cooler and micro motion feed control. Micro motion complete with transmitter MDL T050T6215CAUE2222. Capacity (Design): 0.003 m3 (0.11 ft3). Drive Power: 11.2 kW (15 HP). Pressure: 25 bar (362.6 psi). Temperature: 200 °C (392 °F). Powered By: Electric.

Mikro Bantam hammer and screen mill. Six forged stirrup style hammers.
Lab size with a Reliance AC motor rated for 1725 rpm driven through a Dodge Gearmaster XL speed increaser. Portable, cart mounted on dollies for easy movement. On board control panel with explosion proof motors and controls. Drive Power: 0.25 kW (0.33 HP). Drive RPM: 14,000. Powered By: Electric.

Mikro Pulverizer hammer mill Reliance duty master AC motor rated for 3520 rpm, drives the mill with 6 sets of swing hammers, of the forged stirrup type Chamber has a removable cover for cleaning and maintenance. Chamber is fed with a screw type feeder, powered by a Reliance Duty Master ac motor rated for 0.25 hp at 1725 rpm through a Dodge reducer. With explosion proof motors and controls Diameter: 88.9 mm (3.5 in). Drive Power: 5.6 kW (7.5 HP). Drive RPM: 9,600. Powered By: Electric.

316SS (product contact), sifter, polished with mirror finish, Multi Mill ,with Bead impact knife blade. Sanitary and cGMP construction. 1400 mm height, 330mm diameter, 316 SS perforated screen .5 mm thick, 316SS shaft 38mm diameter x 410mm long, 316 SS knife (20 mm x 55 mm x 6 mm thick) frame 304 cladded, (2) 316 ss blade scrapers (20 mm x 20 mm x 50 mm), mechanical seal, w/ charging hopper. Hindustan Motor: 2.2KW 3/60/220 w/ VFD Bolted to base plate with caster wheels (4) Diameter: 330 mm (13 in). Drive Power: 2.2 kW (3 HP). Powered By: Electric.

Reitz "Disinigretor" Hammer mill Blades are 12" long with a 2.5" deep product chamber Drive Power: 2.2 kW (3 HP). Powered By: Electric.

Hammers belt Inlet dimensions with O.R.C. Cover 12" x 10.75". Discharge chute 16" x 22.5" Diameter: 355.6 mm (14 in). Drive Power: 5.6 kW (7.5 HP). Powered By: Electric.

Hammermill Disintegrator 18" diameter rotor with 32 hammers Diameter: 457.2 mm (18 in). Drive Power: 37.3 kW (50 HP). Powered By: Electric.

Drive Power: 7.5 kW (10 HP). Drive RPM: 3,510. Powered By: Electric.

rotor speed 3000 rpm 3/50/220/380/440 volt 3" bottom diameter 316 s/steel feed chute, 5" x 2" 316 s/steel discharge chute, built on on/off switch Diameter: 254 mm (10 in). Drive Power: 3.7 kW (5 HP). Drive RPM: 3,000.

hammer mill Diameter: 406.4 mm (16 in). Drive Power: 11.2 kW (15 HP).

316 SS contact with 304 SS parts jacketed colloid mill 0.75" inlet and outlet with Tri-Clover style fittings Jacket inlets and outlets are 0.50" Dolly stand mounted with on board controls including a GSz Variable Frequency Drive Machine # 2.2KNE2 Frame4 ND90L Shipping dimensions: 52" x 18" x 35" Drive Power: 2.2 kW (3 HP).