Quote
Quote Cart
clear all items
All Equipment Evaporators

Evaporators - Used and Surplus Inventory | IPP

Used evaporators for sale: efficient separation for solvent recovery and product concentration

Searching equipment…

Top Evaporators in stock

Highest-ranked available inventory for this selection.

Select a Evaporator type

Choose a subtype for a more focused set of listings.

Narrow these listings

Common Filters
Specifications

Available Evaporators

Showing 7 of 7 matching Evaporators. Search: "glass lined".

Stock Number: #86856
Orientation: Vertical
Diameter: 36 in
Height: 28 in
Additional Information:
  • 130 gal (500 liter), Open top, dish bottom. No bottom outlet.
More Details ⟶
Stock Number: #233281
Orientation: Vertical
Feed Heating: Yes
Additional Information:
  • Feed stock up to 33 GPM Aquesos waste
  • Individual Components:
  • IPP #233138: 18" diameter packed column, fabricated from C-22
  • IPP #233139 and 233140: 16 Sq. Ft., Hastelloy C-276 Plate and frame heaters
  • IPP #233141: 639 Sq. Ft., Asthenic Stainless Steel shell and tube heater
  • IPP #233142: 6,500 GPM Hastelloy elbow recirculation pump
  • IPP #233143: 5,000 Gallon, glass lined recirculation tank
  • IPP #233455: 169 Sq. Ft., 316 SS vertical shell and tube heat exchanger
  • IPP #233454: 484 Sq. Ft., 316 SS shell and tube condenser
  • IPP #233146: 12,000 Gallon, 304 SS, vertical storage tank
  • IPP #233496: 24" column, 316 SS Alloy Fab, 270" overall length.
More Details ⟶
Stock Number: #18493
Evaporation Rate: 535 lb/h
Total Heat Transfer Surface Area: 107.6 ft²
Orientation: Vertical
Diameter: 48 in
Height: 42 in
Temperature: 392 °F
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Drive Type: Pfaudler VS80-U21983
Additional Information:

Mfd by Balfour/Sybron Order #48621 Lined w/glass #3115 CS jkt 98 psi @ 392 deg F Has glass covered int rotor w/graphite wipers. Retaining pins and rotor shaft are titanium. jkt body section, 48" dia x 9'10" str side; and clamp jkt cone btm.Has 3-sections: clamped dish entrainment section, 48" dia x 42" str side; jkt body section, 48" dia x 9'10" str side; and clamp jkt cone btm.

Drive is Pfaudler Type VS80-U21983, belt driven by approx 10 HP motor w/mech seal on shaft.

More Details ⟶
Stock Number: #9771
Diameter: 40 in
Height: 24 in
Additional Information:

130 gal, open top tank/crystallizer. 46" OD top flange. W/poylpropylene hinged lid w/CS bracket for clamp-on mixer (not included).

More Details ⟶
Stock Number: #23886
Capacity (Design): 40 gallons
Orientation: Vertical
Diameter: 30 in
Straight-side Length: 16 in
Jacket Type: Standard
Jacket Material: Carbon Steel
Jacket Pressure: 60 psi
Jacket Temperature: 350 °F
Support: Legs
Additional Information:
  • Jacketed tank, open top. Ground clearance: 12"
  • Height 24" from top to jacket
  • No bottom outlet
More Details ⟶
Stock Number: #87722
Orientation: Vertical
Diameter: 32 in
Height: 28 in
Additional Information:

Tapered side.

More Details ⟶
Stock Number: #233950
Evaporation Rate: 16,350 lb/h
Vapor Body #1: IPP # 233941 -2000 Gallon fiberglass vapor body. IPP # - 233944-1900 gallon Fiberglass vapor body
Additional Information:

water evaporation rate @5 lbs./Hr. per Sq. Ft. of surface area Fiberglass double effect falling film evaporation system Designed to operate with corrosive conditions The system includes the following major components: Heaters, Vapor bodies, Vacuum system, Pumps, and major pieces of interconnecting piping All the major pieces of the system have individual stock numbers IPP # 233941 2000 Gallon fiberglass vapor body IPP # - 233944-1900 gallon Fiberglass vapor body IPP# 233942 2000 Sq. Ft. Graphite heater IPP # 233943 1272 Sq.Ft., Titanium heater IPP # -233945 and 233946 small graphite heat exchangers IPP# 233947, 233948, and 233951 Graphite heat exchagers IPP # 233956 and 233957, Titanium centrifugal pumps, IPP # 233958, 233959, and 233960 Teflon lined pumps

More Details ⟶

Browse used, surplus and secondhand evaporators from IPP – in stock and optimized for chemical, pharma and food processing

Save time and money with IPP’s ready-to-ship evaporators for distillation, purification and thermal separation

Used evaporators are thermal separation systems that concentrate solutions, recover solvents, or reduce waste volume by vaporizing liquid components. These systems are essential across industries where product purity, yield, and cost-efficiency matter. With more than 47 years of industry expertise, IPP offers used, secondhand and surplus evaporators from 20 complete plant sites and a massive inventory of over 15,000 systems ready to ship.

Evaporators are available in multiple configurations—falling film, rising film, forced circulation, wiped film and multiple-effect systems—each tailored for specific viscosity, temperature sensitivity and throughput needs.

Primary uses across industries

  • In pharmaceuticals, evaporators concentrate APIs and remove solvents during intermediate processing
  • In chemical manufacturing, they purify products and reclaim valuable solvents from process streams
  • In food and beverage, they concentrate juices, dairy products, extracts and syrups
  • In wastewater treatment, they reduce volume and recover reusable components

Types of materials processed

  • Heat-sensitive or solvent-based mixtures
  • Aqueous solutions, organic solvents and slurries
  • Viscous liquids and high-solid content mixtures

Common materials of construction

Evaporators are built for long service life, cleanability and chemical resistance:

  • Stainless steel for sanitary and corrosion-resistant applications
  • Hastelloy and other alloys for aggressive chemicals
  • Glass-lined steel for ultra-pure or reactive materials

Key features of industrial evaporators

  • Available as single-effect or multi-effect systems for energy efficiency
  • Options for vacuum operation to protect heat-sensitive materials
  • Integration with distillation, crystallization or solvent recovery units
  • Configurable heating sources: steam, hot oil, or electric
  • Designed for clean-in-place (CIP) and automated control systems

Learn more about evaporator types and applications in process industries from Chemical Engineering.

Find your evaporator at IPP

Search the IPP inventory or contact IPP’s equipment experts to locate the ideal used, secondhand or surplus evaporator for your facility. Whether for concentration, recovery or purification, IPP helps you save time and money with precision systems ready to ship.

Evaporator FAQ

Have questions about Evaporators or our services? Learn more about our products and why customers choose IPP.

What’s the difference between falling film and forced circulation evaporators?
Falling film evaporators are ideal for heat-sensitive materials and lower viscosities, while forced circulation systems handle higher solids and fouling-prone feeds.
Can used evaporators be modified for new applications?
Yes – many units can be reconfigured with new instrumentation, controls or materials of construction to meet changing process needs.
Are multi-effect evaporators more energy efficient?
Absolutely – they reuse vapor from one stage to heat the next, reducing overall steam consumption and operational costs.
What are the benefits of buying used or secondhand process equipment from IPP?
IPP provides faster lead times, cost savings and global support from a team with 47+ years of process plant experience.