Quote Cart
Jacketed Vacuum plate dryer, Order # 365306/2. jacket 4 bar @ 100 degrees C (21 liter), jacket test pressure 6.5 bar, 316L stainless steel (1.4435) jacket, Approximately 2.4m diameter x 1.4m straight side, weld dished top, bolt bottom. with (4x) 2000mm 316L stainless steel (1.4571) jacketed trays, approximately 2m diameter x 25mm deep with scrappers and (4x) smaller diameter plates with scrappers. internal shaft belt driven by 0.75 kw, 3/50/415 volt, 700 rpm Exd 11 BT5 motor via Lenze vari-speed gearbox, type 11-60-107-259, 1160-1600/10.5-171 rpm. Top head feed openings has a (1) Krauss Maffei 316L stainless steel (1.4435/1.4571) rotary vacuum seal, type VS20, working temperature 100 degrees C, direct driven by 2.8 kw, 3/50/415 volt, 280-1430 rpm Exd-11B-T4 motor. the discharge on the bottom head has (1) Krauss Maffei 316L stainless steel (1.4435/1.4571) rotary vacuum seal, type VS10, working temperature 100 degrees C, direct driven by 2.1 kw, 3/50/415 volt, 280-1430 rpm Exd motor. Controls available for both seals. Dryer includes (2) Nash stainless steel vacuum pumps, size SC-5-SS, driven by 30 kw, 3/50/415 volt, 1460/1470 rpm Exd-11B-T4 motor. top head and straight side have insulation and cladding.
Type: Dryer-Wyssmont
Manufacturer: Krauss Maffei
Model: VTT20/11-2/90-4
Condition: Used
Material: Stainless Steel 316L
Diameter: 63,500 mm (2,500 in)
Number of Trays: 11
316L stainless steel (1.4571/1.4435) continuous vacuum plate dryer, 27.5 square meter heat surface area, manufactured by Krauss Maffei, fabrik #3608, KM order #365297/2/001, vessel 20 mbar @ 95 degrees C (11820 liter), (6) 1750mm diameter & (5) 1930mm diameter 316Ti stainless steel (1.4571) steam heated plates, each plate fitted with a scraper , plates 6 & 8 fitted with a crushing roller, vessel 2.5m diameter x 1881mm straight side, bolt dished top, bolt truncated flat bottom, under driven by 1.1kw, 3/50/415 volt, 700 rpm Exd 11B T5 motor via a vari-speed Lenza gearbox, 1160/1600-10.5/1.71 rpm, 1:6 ratio, packed gland on shaft, Openings: top : 1-500mm manway, 1-400mm (vacuum), 1-150mm (product inlet), 2-50mm (standby’s), straight side: 4-500mm manways, 1-125mm (heating inlet plate 3 & 4), 1-65mm (heating inlet plate 1 & 2), 2-50mm (standby & vacuum gauge), 1-40mm (heating inlet plate 11), bottom side: 2-175mm (hand holes), 1-100mm (level feeler), 2-65mm (heating outlet plate 1,2,3 & 10), 1-40mm (heating outlet plate 11), bottom: 1-200mm (product outlet with blind cover), 1-150mm (product outlet, Product inlet and outlet with a stainless steel rotary lock valve, driven by 2.2kw, 3/50/415 volt, 2850 rpm Exd 11B T5 motor via a vari-speed gearbox, 2800/0 to 1058 rpm, steam heated shaft with rotary union joint process data 55kg/hour of final product, initial moisture 65% rel. to 35% purity, residual moisture 35% rel. to 65% purity, density (moist) 392-471 kg/m3, density (dry) 245-318 kg/m3, drying temperature 65 degrees C, drying time 45-65 minutes, pressure in dryer 10 bar, mass flow of wet material 55 x 0.65 : 0.35 = 102 kg/hour, volume of wet material 102 : (0.392...0.471) = 260 – 217 liter/hour
Shelves MOC: Stainless Steel 316. Temperature: 95 °C (203 °F).
Type: Dryer-Wyssmont
Manufacturer: Krauss Maffei
Model: GTT 27/11
Condition: Used
Material: Stainless Steel 316L
Shelves MOC: Stainless Steel 316L
Type: Dryer-Wyssmont
Manufacturer: Krauss Maffei
Model: TTB-20/8
Condition: Used
Material: Stainless Steel 316
Diameter: 1,926 mm (75.8 in)
Height: 1,424 mm (56.1 in)
20.2 square meter, plate dryer/cooler, Drying surface: 188 sq ft (17.5 sq meter); cooling surface: 29 sq ft (2.7 sq meter). Initial moisture: 40%, residual moisture: 0.5%; drying temp: 100-105 degrees C, drying time 38.5 minutes; cooling temperature: 35 degrees C, cooling time: 5.5 mins. (8) plates cored for steam heating, 1763mm/1926mm diameter. (2) raker agitators on each plate, (2) heater banks. Max working pressure: 11 bar. Unit direct driven by Lonze varispeed gearbox, belt driven by 1.5 KW, 3/50/415 volt, 1440 rpm flameproof motor. Chamber size: 2038mm diameter x 1424mm high. All wetted parts are 316 stainless steel. (2) 1345mm high x 888mm wide inspection doors with (2) 300mm x 228mm sight glasses on each door. Openings: 1-200mm discharge, 16-37mm plate inlets/outlets, 4-25mm on heater banks, 1-228mm dust outlet, 1-300mm feed.
Number of Trays: 8. Shelves MOC: Stainless Steel 316. Temperature: 105 °C (221 °F).
Type: Dryer-Wyssmont
Manufacturer: Krauss Maffei
Model: TTB20/29
Condition: Refurbished/Rebuilt
Material: Stainless Steel 304
Diameter: 2,130 mm (83.9 in)
Tray Diameter: 1,930 mm (76 in)
plate dryer system plate area 73.1 square meter (29) 1750/1930mm diameter 304 stainless steel plates Drying chamber 2130mm x 3135mm x 4812mm high (3) air heaters, manufactured by GEA
Number of Trays: 29. Temperature: 200 °C (392 °F). Tray Dryer Type: Semi Continuous. Orientation: Vertical.