top load, bottom discharge, 12mm thick basket, 3.15 square meter filter area, 1100 rpm permissible speed single motion plow driven by a hydraulic powerpack, powerpack driven by approx 0.75kw EX motor, mounted on a steel baseplate,

• Halar lined basket

clarifier basket centrifuge bottom discharge (2) horizontal baffles basket capacity 7.6 cu ft. 316SS basket, curb and plow Top driven by hydraulic powerpak Hinged access port 1" rotary pneumatic skimmer

spare top and bottom section bottom discharge basket centrifuge bottom discharge design

basket only 1/4 " drainage holes Eight 7/8" bolt hole pattern

with single action pneumatic operated plow cylinder.(no Plow) Cover has an inspection door with a 9" sight glass Cover has the following openings for piping connections One, 6" weld neck flange, One 2" opening for feed pipe, Three, 1" opening for accessories.

Mirror Polished finish designed for GMP & Sanitary use. 316 SS perforated Basket 22KW Crompton Breaves drive w/ dynamic braking Hydraulic power pack Flame proof control panel Overall dimensions 2000mm L x 1500 mm W.

perforated basket centrifuge 316SS TI (1.4571) Half top hydraulically operated liftable cover Basket thickness 10mm Hydraulic operated knife. W/hydraulic powerpak, mfd by Hydramatic. Hydraulic driver Type A2P W/250mm sight glass

Ferrum basket centrifuge with Titus cyclone cake discharge system Complete centrifuge and discharge system is gas-tight design. deep perforated basket pressure rated 1.96 Sqm, 0 to 950 upm 480 kg, 316L s/steel housing and cover pressure rated 1.6 bar @ 120 degrees C Top cover has 100mm sightglass with light 225mm sightglass 75mm wash pipe 75mm feed pipe 45mm, 80mm, and a 1/2 hinged cover 150mm filtrate outlet Unit has top entering feed and wash pipes and has a hydraulic knife for cake removal from basket walls Cake is pneumatically removed from the centrifuge though a Krauss Maffei, Titan cyclone dryer, which pulls the cake out through the top of the centrifuge Complete system includes a 630 liter SS horizontal mother liquor tank manufactured by Edak, Serial number 965/1, rated 1.6 bar, Krauss Maffei solvent condensor manufactured by J Engelsman, Serial Number 15641/2, miscellanous centrifugal pumps,
K-M Titus cylone discharge system with 2,880 CuM/Hr, SS suction fan driven by a 30 KW, 3 phase 50 cycle EExeII motor, 385 liter 1.4571 SS cake cyclone, 692 mm diameter x 450 mm ss with 1100 mm cone, discharging the cake into a 500 liter 1.4435 SS jacketed product receiver, manufactured by Hanag, rated -1/2 bar @ -30 to 200 degrees C internal; 6 bar @ -30 to 200 degrees C in the 1/2 pipe coil jacket, with bolted dished top, cone bottom, 1/2 pipe coil jacket on cone bottom, 1000mm diameter x 342 mm straight side with 682 mm deep cone bottom.
Entire system is sealed and designed for use in Solvent processes.
Previous use allowed solvent ladened product cake to be dried using ambient temperature in the cyclone air flow before being collected in the product bin

perforated basket centrifuge. Hastelloy basket, halar lined curb, 2.4610 basket, cover 1.4571 material Gas tight Cover 1/2 leftable hydraulically. Control panel. Perforation 8mm dia W/0.75 KW, Motor: 3 phase Hydraulic pump: 0.75 KW, 3/50/380 volt, 1450 rpm

vertical decanter centrifuge with motorized liquid skimmer Rated 150/180 l/mn flow rate manufactured by Rousselet Robatel Rated 150/180 l/mn flow rate 5-60 degrees C 100 liter solids capacity Solid bowl is 1000mm diameter x 500 mm deep bowl 1.4539 Stainless top cover mounted on a hinge with an electric motor for opening the cover liquid skimmers and solid discharge skimmer Liquid skimmer is driven by a 0,15/0,22kW, 3 ph/50 cyc/ 400 volt electrical motor, manufactured by CEO, type 63-2/4, serial number 00017320102, 2 speed 1400/2760 rpm Includes (1) control panel; with (1) control cabinet with hydraulic power pack with aa 0,55-0,66kW electrical motor, manufactured by Leroy Somer, type LS80LT, serial number 660550RM001, 3ph/50-60Hz/230-460V/ 1.385-1.700rpm; Centrifuge and powerpack is mounted on stainless steel frame. System is CE rated

Motor is inverter duty.

DeLaval Mark III btm discharge perforated basket centrifuge. (2) horiz baffles. Single motion pneumatic plow. 1" rotary pneumatic skimmer. Max cake thickness 4.5" Feed pipe 1 1/2", filtrate outlet 4", solids outlet 21". Dynapower hydraulic motor. (*) (Not to be used for any drug or food application).

perforated basket centrifuge EX motor with air cooling fan mounted on top driven by 0.12 KW 3/50/380 volt motor.

Heine 316SS (V4AE) Basket thickness 6mm Pneumatic operated liftable half top cover. W/1-200mm sight glass, 1-100mm sight glass, 2-25mm, 1-50mm, 1-75mm; 1-100mm discharge W/hydraulic motor and W/hydraulic powerpak

top load, bottom discharge wall thickness of the basket 12mm lid with assist mechanism basket with electric motor

top load, bottom discharge semi automatic Unit has 316SS curb, lid, and internals hydraulic operated plow, hydraulic basket drive with hydraulic powerpack, and 600 gallon CS surge tank manufactued by M&M welding Power pack is located in EIN53 (RA)

• Dynamic braking resistor system
• Frame 364 T

bottom discharge perforate basket centrifuge Single motion pneumatic operated plow 9 cu ft cake capacity Variable frequency drive provided after sale

XP motor Openings: cover 2-6" (150mm) sight glasses 3/4" (20mm), with 4-nozzles; filtrate 2-4 3/4" (120mm); curb 1-4" (100mm). Handbrake. Hinged cover 34" (862mm) diameter with counterbalance weight. (*)

perforated basket centrifuge Fully liftable cover w/hydraulic system Basket 12mm thick. Max load 400 kg

top load bottom discharge machine #9600 12mm thick basket min speed 80 rpm EX motor Hastelloy C feed pipe Hastelloy C cake gauge Hastelloy wash pipe rubber lined single motion hydraulic driven plow with a Hastelloy C removeable blade driven by a hydraulic powerpack with a 1.5 kw, 3/50/500 volt, 1415 rpm EXd3nG5 motor, local electric panel

btm discharge perforate basket centrifuge Pneumatic single motion plow Hydreco hydraulic motor 6 cu in/rev

Top load, bottom discharge 316SS basket Hersite coated curb teflon lined cover Designed for nitogen purge Vibration switch, the hinged access door has a safety interlock witch will not allow the basket to rotate unless the door is closed and latched, the discharger cannot operate except below a pre-selected unloading speed set at 100 rpm, and controlled by the monitoring system

perforated basket centrifuge. Fully liftable cover Hydraulic powerpak Type HF10 Rubber lining Type BH36K Basket perforations 12mm dia, basket wall thickness 12mm.