Rated 84 rpm output, Drive Power: 18.6 kW (25 HP).

316 SS wetted parts, right angle mixer Motor: 3 phase 220/440 volt 7.25" shaft hub with 6 bolt hole pattern 16"" flange mount (1 3/8"" thick) with a 12 bolt hole pattern Seal is mechanical Drive Power: 14.9 kW (20 HP).

For closed tank mounting Mounting flange: 316SS face, 16" outer diameter, 12 1/2" inner diameter Mechanical seal Motor: 3 phase flameproof motor No shaft with unit 2" diameter x 6 3/4" long stub shaft with 5 1/2" flanged with (4) 3/4" holes With lubricator Drive Power: 4.1 kW (5.5 HP). Input RPM: 1,440.

15 HP/3.75 HP two speed agitator drive 45/23 rpm output 220/440 motor volts, 1200/1800 rpm Two sets two blade straight paddles and one set screen blade paddles, with shaft. Drive Power: 11.2 kW (15 HP).

hydraulic driven agit drive 15 HP Gyrol hydraulic drive SN -1, 7712106 230/460 volt 25 rpm final output -1 rated 68.6 ratio Heavy duty Drive Power: 11.2 kW (15 HP).

base is 26" x 37" with a CS outlet flange (12") Motor: 3 phase Drive Power: 37.3 kW (50 HP).

Right angle design 230/460 volt No shaft w/unit Drive Power: 1.12 kW (1.5 HP). Input RPM: 1,725.

right angle mixer drive Out put RPM is two speed 56/28 24" flanged connection. Packing gland on shaft Drive Power: 55.9 kW (75 HP).

with a CS outlet flange (12") Drive Power: 37.3 kW (50 HP).

base is 29" x 33" with a CS outlet flange (12") Drive Power: 37.3 kW (50 HP).

base is 29" x 33" with a CS outlet flange (12") Drive Power: 37.3 kW (50 HP).

flange mounted agitator vari-speed motor Motor power: 2.16/15/16.2 kW Frequency: 10/50/60 Hz Voltage: 81/400 volt Motor speed: 294/1470/1764 rpm a Siemens reduction gearbox stub shaft with keyway and coupling Drive Power: 15 kW (20.1 HP).

1 bar @ 30 degrees C 4-blade pitched paddle 400/690 volt driven by 2.6kw, 3/50/400/690 volt Drive Power: 2.6 kW (3.5 HP). Drive RPM: 940.

GEA Stelzer 2 bar @ 90 degrees C stainless steel stub shaft with flange no shaft with lubricator no motor gearbox Drive RPM: 154.

Str thru design, 304SS mounting face, 14" OD. 1/3 HP, 3/60/230/460 volt motor. Unit includes shaft 1" dia x 70" long, w/3-blade impellor. Drive Power: 0.25 kW (0.33 HP).

CS agit drive No gland or seal 12" dia CS stub shaft 3/60/220/440 volt No shaft w/unit. Drive Power: 55.9 kW (75 HP). Input RPM: 1,775.

No gland or seal, no stub shaft. Drive Power: 55.9 kW (75 HP).

No gland or seal, No stub shaft. Drive Power: 55.9 kW (75 HP).

agit drive SS stub shaft. No gland or seal. Drive Power: 55.9 kW (75 HP).

Bridge mount design. No gland or seal, no stub shaft. Drive Power: 55.9 kW (75 HP).

agit drive 230/460 volt No gland or seal, no stub shaft Drive Power: 55.9 kW (75 HP).

agit drive 230/460 volt SS stub shaft No gland or seal Drive Power: 55.9 kW (75 HP).

agit drive 230/460 volt No gland or seal no stub shaft Drive Power: 55.9 kW (75 HP).

agit drive 230/460 volt No gland or seal, no stub shaft Drive Power: 55.9 kW (75 HP).

agit drive 230/460 volt No gland or seal, no stub shaft. Drive Power: 55.9 kW (75 HP).

mounted mixer For closed tank mounting Right angle design non-flameproof motor No shaft with unit Drive Power: 2 kW (2.7 HP). Input RPM: 1,420.

Mixer

5 RW drive with motor

For open tank mounting Straight through design Motor: Flanged mounted 2-speed motor 3 phase 18.5/21.3 HP 50/60 cycle 380/415/440/660 volt 1470/1765 rpm 316 stainless steel shaft 65mm diameter x 1100mm long with 300mm diameter sawtooth impellor No seal on shaft Cast iron stool Size 8 with sealed mixer shaft bearing Stool base plate 460mm square Drive Power: 15.9 kW (21.3 HP). Orientation: Vertical.

316 stainless steel flange mounted flange 660mm OD, 200mm ID, with (12) 20mm diameter holes. no shaft Mechanical seal Varispeed pulley drive Electrically driven varispeed mechanism driven by 0.18 KW, 3/50/380/220 volt, 1380 rpm Ex motor. 950 rpm Ex flange mounted motor 80mm diameter x 390mm long with shaft connection flange 190mm OD, 80mm ID with (6) 20mm holes. Drive Power: 11.2 kW (15 HP). Drive RPM: 30. Input RPM: 1,000. Orientation: Vertical.

316SS Shaft & Blades 7" agitator shaft coupling Agitator shaft 3" diameter x 134.5" length w 3 tier blade turbines Two turbines are pitched One turbine is flat all turbines are 29" x 29" Drive Power: 3.7 kW (5 HP). Input RPM: 900.

250-1750 rpm SS vertical portable agitator mixer (3-blade) with electrical motor Mixer mounted on rack Motor data: 500V/ 0,75kW/ 1,33A/ 50Hz/ 2790 rpm mfd by HEW Drive Power: 0.75 kW (1.01 HP). Drive RPM: 1,750. Orientation: Vertical.

1900 mm 316 s/steel propellor agitator agitator shaft 1400 mm long mechanical seal on shaft electrical motor exproof

approx 1800mm 570 to 1140 rpm output agitator shaft 980 mm long Direct coupled to 0.75 to 1.1 kW 3/50/380 volt

air driven 16mm diameter x 1.1m long 3-blade pitched paddle Motor: 3/50/500 volt Drive Power: 0.25 kW (0.34 HP).

Fluid agitator drives Motor: 3 phase 290/500 volt 352/1763 rpm vari-speed gearbox 25mm diameter x 1.5m long 1.4571 s/steel quick release shaft 3-blade marine type impellor drive with adjustable shaft angle and rotation Drive Power: 1.37 kW (1.84 HP).

Fluid agitator drives vari-speed drive Motor: 3 phase 290/500 volt Stober type R37-0000-NK-135-4 352/1763 rpm vari-speed gearbox 25mm diameter x 1.5m long 1.4571 s/steel quick release shaft 3-blade marine type impellor drive with adjustable shaft angle and rotation Drive Power: 1.37 kW (1.84 HP).

Fluid agitator drives vari-speed drive Motor: 3 phase 290/500 volt Stober type R37-0000-NK-135-4 352/1763 rpm vari-speed gearbox 25mm diameter x 1.5m long 1.4571 s/steel quick release shaft 3-blade marine type impellor drive with adjustable shaft angle and rotation Drive Power: 1.37 kW (1.84 HP).

Fluid agitator drives vari-speed drive Motor: 3 phase Stober type R37-0000-NK-135-4 352/1763 rpm vari-speed gearbox 25mm diameter x 1.2m long 1.4571 s/steel quick release shaft 3-blade marine type impellor drive with adjustable shaft angle and rotation Drive Power: 1.37 kW (1.84 HP).

Direct drive flange mount mixer 12" x 12" mounting Flange Electric Motor: 60 or 50 hz 1725/1425 rpm 220/440 volts 208 Drive Power: 1.49 kW (2 HP).

Direct drive flange mount mixer 12"" x 12"" mounting Flange electric motor: 60 or 50 hz 1725/1425 rpm 208 220/440 volts 3 phase Drive Power: 1.49 kW (2 HP).

Greaves flange mounted agitator drive For closed tank Straight through design Motor: 3 phase non-flameproof motor 316 stainless steel shaft 25" long x 1 1/2" diameter with axial flow turbine agitator (1) 4-blade impellor PCD of holes 16 1/2" Drive Power: 7.5 kW (10.1 HP).

Size: 2 For closed tank mounting Straight through design Packing gland Flange mounted motor (no motor with unit) No shaft with unit 2 1/2" diameter 316 stainless steel stub shaft Mounting flange 10" ASA 150, 13" PCD, 12-holes

For closed tank mounting Straight through design Drive Power: 4 kW (5.4 HP).

Straight through design Mounting flange 316 stainless steel face, 400mm OD, 330mm ID, with 12-bolt holes no motor No shaft with unit 50mm diameter x 190mm long 316 stainless steel stub shaft with 137mm OD x 75mm ID coupling flange with (4) holes Mechanical seal with lubricator Drive Power: 2 kW (2.7 HP). Input RPM: 1,500.

For closed tank mounting 1435 rpm input Direct coupled Motor: 3 phase non-flameproof motor No shaft with unit Packing gland. Drive Power: 7.5 kW (10.1 HP). Input RPM: 1,435.

For closed tank mounting 1410 rpm input 3/50/415 volt non-flameproof motor No shaft with unit Packing gland. Drive Power: 5.5 kW (7.4 HP). Input RPM: 1,410.

For open tank mounting Straight through design Motor: 3 phase 230/400 volt No shaft with unit Drive Power: 2.2 kW (3 HP).

Motor: 230/460 volts with C-Flange size 107 class 2 Drive Power: 18.6 kW (25 HP). Drive RPM: 1,800.

1/2 Hp Lightnin Mixer 1725/1425 RPM Amps 1.6/.8 Drive Power: 0.37 kW (0.5 HP). Drive RPM: 1,725.

wetted parts with shaft and impeller with 4' 316 SS shaft Clockwise rotation 115/230 v motor Mounting flange 11" OD x 9.5" BC fits standard 8" 150 # flange Drive Power: 0.22 kW (0.3 HP). Drive RPM: 1,750. Orientation: Vertical.

AC motor Type TPR Identity # 78R022K-UP with shaft and impellor Drive Power: 0.87 kW (1.17 HP).

Drive Power: 5.6 kW (7.5 HP). Drive RPM: 1,750. Input RPM: 1,750.

gear drive disco variable speed motor driven by a Marathon drive: 3 HP 17.35 RPM 230/460v 60 Hz 86/43amps class 1,2 group D FG, Frame: 182 TC Model 18, 182TTGS70698PL. Drive Power: 2.2 kW (3 HP). Drive RPM: 1,750.

Reserved for Gyrol Fluid drive

order #811648-1 Service factor 1.25. With GE 30 HP AC electric motor. Drive Power: 25.4 kW (34 HP). Drive RPM: 1,750. Orientation: Vertical.

right angle down agit drive 3/60/220/440 motor Drive has SS stub shaft (no gland or seal) Drive Power: 7.5 kW (10 HP).

John Crane mechanical seal. Drive Power: 11.2 kW (15 HP).

down agit drive 220/440 volt Drive has SS stub shaft (no gland or seal) Drive Power: 7.5 kW (10 HP).

Agitator is 600mm long, diameter 85mm, Driven by a 11 kW E-Motor 400V/44 A/50Hz/1440 rpm motor. Drive Power: 11 kW (14.8 HP).

Agitator is 865mm long, diameter 35mm, Driven by a 1,1 kW E-Motor 220/380V/8,1/3,5 A/50Hz/700 rpm motor. Drive Power: 1.1 kW (1.48 HP).

agitator drive with mechanical seal Agitator is 900mm long, diameter 35mm Motor 230/ 400V/7,2/4,2 A/50Hz/700 rpm motor. Drive Power: 1.5 kW (2 HP).

Agitator is 860mm long, diameter 40mm E-Motor 220/380V/1/3,5 A/50Hz/700 rpm motor. Drive Power: 1.1 kW (1.48 HP).

For open tank mounting Input speed: 1200/900 rpm Output speed: 125/94 rpm 50/28.1 HP, 3/60/460 volt, 1185/890 rpm motor, UL label. Unit includes epoxt coated CS shaft, 7" dia x 178" long w/(1) 3-blade impellor. (4) epoxy coated CS baffles 32" wide x 116" long. 60" dia x 60" high draft tube. Drive Power: 37.3 kW (50 HP). Input RPM: 1,200.

For open or closed tank mounting. Input RPM: 1750/1165 Output RPM: 184/55 Compact design. 100/66 HP, 3/60/460 volt, 1775/1175 rpm motor, UL label. No shaft w/unit. 6" dia CS stub shaft w/coupling flange 13 7/8" OD, 8-bolt holes. Drive Power: 100.7 kW (135 HP). Input RPM: 1,750.

agit drive closed tank mounting 17.5 to 3.8 rpm output Mounting flange 316SS face, 19" OD, 12" ID, w/12-bolt holes Packing gland 230/460 volt UL label Adjustable speed by varispeed pulleys No shaft w/unit 3" dia x 10" long stub shaft with 7 1/2 OD flange, 8-holes Drive Power: 1.12 kW (1.5 HP). Input RPM: 1,750.

agit drive Order #306785 service factor 1.25 Drive Power: 90.1 kW (120.8 HP). Input RPM: 1,750.

For closed tank mounting. 1200/900 rpm input, 125/94 rpm output, Direct coupled to 50/28. UL label, No shaft w/unit. Drive Power: 37.3 kW (50 HP). Input RPM: 1,200.

3 blade retreat curve agitator 80 3/4" overall length 2 1/2" diameter with a 36" spam with a pte 6 drive end Fits 300 gallon reactor Vessel Size: 1,136 L (300 gallons).

Reconditioned, 4 RW gearbox,

4 RW base plate .

4 DTW gearbox with motor HP 10/5

Designed for open tank mounting No gland or seal. Unit has 5" dia x 84" long 304SS shaft. 4-blade impellor, 80" span. Drive Power: 55.9 kW (75 HP).

hydraulic driven agit drive. hydraulic drive, Driven by 15 HP, 3/60/230/460 volt, 1755 rpm TEFC motor. 25 rpm final output. Heavy duty. Drive Power: 11.2 kW (15 HP).

Drive Power: 55.9 kW (75 HP). Drive RPM: 100.

4 DTW gearbox

SEW Eurodrive gearbox

drive pedestal with stainless steel lubricator, seal housing, and packing plate

5 RW 6045 Gearbox with motor bracket

For closed tank mounting Straight through design flameproof motor Drive Power: 1.1 kW (1.48 HP).