Stainless Steel 316 JH Day Dryer- Nauta / Conical - IPP# 106168

Type: Dryer- Nauta / Conical

Manufacturer: JH Day

Model: FA-3.5 Mark II

Condition: Used

Material: Stainless Steel 304

Capacity Solids: 0.1 m3 (3.5 ft3)

Capacity Liqid: 98.4 L (26 gallons)

• U stamped Jacket area: 12 square foot.
• Dryer chamber 40" diameter x 42" cone.
• Screw drive is a 230/460V Pacemaker motor with UL label, 1750 RPM input speed, 190 RPM output speed.
• Bolted flat top.

Vessel Pressure: -0.07 bar (-1 psi). Vessel Temperature: 176.7 °C (350 °F). Jacket Pressure: 8.6 bar (125 psi). Jacket Temperature: 178.3 °C (353 °F). Vessel Vacuum Rated: Yes.

Type: Dryer- Nauta / Conical

Manufacturer: Krauss Maffei

Model: MT 2/300

Condition: Used

Material: Stainless Steel 316

Capacity Solids: 3.3 m3 (116 ft3)

Capacity Liqid: 3,300 L (871 gallons)

• Jacket conical screw mixer/dryer with top mounted filter,
• screw 7 bar @ 150 degrees C . (18.5 liter), single internal 316L (1.4404) stainless steel screw which is cored for steam heating, screw bottom driven by 11kw 3/50/380 volt 1500 rpm Eex motor, carriage motor 1.1 kw, 3/50/380 volt 1500 rpm Ex motor.
• Bottom discharge valve driven by 0.75kw, 3/50/380 volt 1400 rpm Ex motor, dished top with a 5.5 square meter 316L (1.4404) stainless steel jacketed reverse jet filter.
• Manufactured by Kilsch Apparatebau Gmbh, fabrik #2184/2, pressure -1/2 bar @ 170 degrees C (750 liter),bolt dished top, (4) jets, TUV certified

Vessel Pressure: 2 bar (29 psi). Vessel Temperature: 170 °C (338 °F). Jacket Pressure: 7 bar (101.5 psi). Jacket Temperature: 170 °C (338 °F). Screw Heated: Yes. Screw Pressure: 7 bar (101.5 psi). Screw Temperature: 150 °C (302 °F).

Type: Dryer- Nauta / Conical

Manufacturer: Bauer Mainz

Model: T710C

Condition: Used

Material: Stainless Steel 316

Clad: Yes

Capacity Solids: 10 m3 (353 ft3)

Capacity Liqid: 10,000 L (2,650 gallons)

• Single stainless steel screw, screw bottom driven.
• Dished top with a 26 square meter 316Ti (1.4571) stainless steel reverse jet filter
• Pressure -1/3 bar @ 165 degrees C.
• Bolt dished top, (12) jets.
• TUV certified, CE marked.

Vessel Pressure: 3.2 bar (46.4 psi). Vessel Temperature: 250 °C (482 °F). Jacket Pressure: 3 bar (43.5 psi). Jacket Temperature: 165 °C (329 °F).

Type: Dryer- Nauta / Conical

Manufacturer: Engelsmann AG

Condition: Used

Material: Stainless Steel 316

Clad: Yes

Capacity Solids: 10 m3 (353 ft3)

Capacity Liqid: 10,000 L (2,650 gallons)

• Pressure -1/3.2 bar @ 250 degrees C.
• Single stainless steel screw, screw is bottom driven.
• Dished top with a 316Ti (1.4571) stainless steel reverse jet filter, pressure -1/3 bar @ 165 degrees C (1220 liter).
• Bolt dished top, (6) jets,
• TUV certified, CE marked

Vessel Pressure: 3.2 bar (46.4 psi). Vessel Temperature: 165 °C (329 °F). Jacket Pressure: 3 bar (43.5 psi). Jacket Temperature: 165 °C (329 °F).