Quote Cart
CS jacketed ribbon blender
Internal pressure rated 3 psi @ 200 deg. F to -20 deg. F min.
Jacket is rated 60 psi @ 200 deg. F to -20 deg. F min.
Blender configuration is full flat top cover with center bottom outlet.
Shaft has stuffing box, ribbon design is removable, continuous double ribbon with Teflon wipers
Shaft is driven through a Dodge shaft mounted reducer with a 24.7/1 gear reducer.
Top cover is clamp on removable design.
Top cover openings include 2-4", 1-8", 2-1", and 1 top feed/manway opening of 12"x16". Vessel is fully insulated.
Center bottom outlet is approx. 6" and discharges through a knife gate into a Young motorized 2-3 hp delumper.
Type: Mixer-Ribbon & Paddle
Manufacturer: Loedige Littleford Ploughshare
Model: KM8000
Condition: Used
Material: Stainless Steel 304
Design Capacity: 8 m3 (282.5 ft3)
Operating Capacity: 5 m3 (176.6 ft3)
continuous mixing 25,000 kg/hr 8000 liter(2113 gallon) total capacity with (2) side hatches with hinged covers and hand wheel swing bolts, (1) 16" x 24" ID top drive end charge port, (1) 16" ID vent port top center, and (1) 17" x 20" ID bottom end discharge port. Internal shaft with plows 3/60/230/460 volt 1750 rpm down to 90 rpm Weight 17,200 lbs.
Operational mode: Continuous. Ribbon Type: Plows.
Type: Mixer-Ribbon & Paddle
Manufacturer: Sprout Waldron
Model: DA-26-12
Condition: Used
Material: Stainless Steel 304
Design Capacity: 1.13 m3 (40 ft3)
Operating Capacity: 0.85 m3 (30 ft3)
horizontal, twin paddle mixer SO # C-l6001 with 10 Gauge covers and flat top with 3 "V" belt sheeves through a Dodge single reduction torque arm. Torque arm # T-17 Capable of continuosly handling 48,000 lbs/hr.
Operational mode: Continuous. Ribbon Type: Paddles.
Type: Mixer-Ribbon & Paddle
Model: U-700
Condition: Used
Material: Stainless Steel 304
Design Capacity: 1.5 m3 (53 ft3)
Operating Capacity: 1 m3 (35.3 ft3)
stainless steel ribbon blender. Chamber 60" long x 38" wide x 51" deep, Packing glands. Bolt flat top w/17" x 12" hinged manway. Openings: top 3-9"; btm 1-5" w/valve. worm and worm wheel.
Ribbon Type: Interrupted ribbon. Agitation Shaft Sealing: Packing.
Type: Mixer-Ribbon & Paddle
Manufacturer: Bepex
Model: JMX JS 250
Condition: Used
Material: Stainless Steel 304
Design Capacity: 9.9 m3 (350 ft3)
Operating Capacity: 7.1 m3 (250 ft3)
ribbon blender Vessel rated for atmospheric Jacket code stamped designed for batch processing 304 Stainless Steel body with 304 SS dimple jacket Shell rated atmospheric @ 100 degrees F. Jacket rated for 150 psi @ 100 degrees F. Estimated heating surface area is 165 Sq.Ft. AC Reliance High Efficiency XE motor Dodge TM gear reducer Dodge Gear Reducer is a size # 281TU900A2, ID # 40401934PF rated for 30 HP, 24 rpm output with a 47:1 ratio. Chain driven. Two 8" pneumatic discharge gate valves. Closed top with two grated openings.
Vessel Pressure: 1.01 bar (14.7 psi). Vessel Temperature: 37.8 °C (100 °F). Operational mode: Batch. Ribbon Type: Double Helix. Paddle/Ribbon MOC: Carbon Steel.