Type: Dryer-Twin Shell & Double Cone
Manufacturer: Patterson Kelly
Condition: Used
Material: Stainless Steel 316
Capacity Design: 5 m3 (176.6 ft3)
Capacity Operating: 2.8 m3 (100 ft3)
vacuum tumble dryer system. Designed for 50 Lbs/ cubic foot density. Dryer driven by 10 HP 3/60/460V XP motor with Reeves variable speed drive. With (2) 18" diameter charge ports, 1-18" diameter discharge port with pneumatic operated valve. Equipped with skid mounted vacuum system including a Graham two stage water seal vacuum pump model 2PV52120/12/43/1, driven by 10 HP 3/60/460V 1760 RPM motor. A horizontal 125 square foot 316 stainless steel tubes, tube sheets, heads, steel shell heat exchanger, 225 gallon 316 stainless steel condensate receiver. W202093 stored at DW12 (S). JB
Jacket Pressure: 2.1 bar (30 psi). Jacket Temperature: 121.1 °C (250 °F). Product Density: 1.42 m3 (50 ft3).
Type: Dryer-Twin Shell & Double Cone
Manufacturer: Patterson Kelly
Condition: Used
Material: Stainless Steel 304
Capacity Design: 0.57 m3 (20 ft3)
Capacity Operating: 0.37 m3 (13 ft3)
Shell rated full vac @ 200 deg F 3/60/220/440 volt chain and sprocket drive 12" feed port 6" discharge
Vessel Pressure: -0.07 bar (-1 psi). Vessel Temperature: 93.3 °C (200 °F). Jacket Pressure: 1.03 bar (15 psi). Jacket Temperature: 93.3 °C (200 °F). Full Vacuum: Yes. Product Density: 1.67 m3 (59 ft3).
Type: Dryer-Twin Shell & Double Cone
Manufacturer: Patterson Kelly
Condition: Used
Material: Stainless Steel 304
Capacity Design: 3.8 m3 (133 ft3)
Capacity Operating: 2.8 m3 (100 ft3)
vacuum tumble dryer system. jacket serial number 199161. (Jacket side only built to ASME code). Rated density 75 lbs/ cubic foot. With stainless steel vacuum arm. Top heads have (2) 8" quick opening manways , bottom has an 18" discharge set up for valve mounting. Shell turning speed: 0.86- 73 RPM. Driven by 10 HP 3/60/440 V XP motor V belt driven by Reeves varispeed gear. Skid mounted vacuum system consists of a 168 square foot condenser manufactured by Yula, serial number 9034, rated 100 PSI & 250 degrees F on shell side, 100 PSI @ 250 degrees F on tube side. National Board number 5118. Tubes, tube sheets and heads made of 304LSS; Shell carbon steel. Shell 10" diameter x 4'10" long. With Graham 316 stainless steel two stage liquid ring vacuum pump model 2V5212 ( rated for 199 cfm) ,mechanical seal on shaft, driven by 15/10 HP 3/60/230/460V, 1760 RPM EX Marathon motor. With vertical 225 gallon separator tank. Gas contact area's are stainless steel. Also includes a PK Heating /cooling system (250 degrees F at 30 psi), electric immersion with two Chromalux Immersion elements, Model # TM-126015, 60 Kw, 3 ph, 480 volt., Durco Mark II centrifugal pump 1.5 x 1 x 6/50 driven by a 1 hp electric motor, and a 30 gallon expansion tank. W202092 stored at DW12 (S).JB
Jacket Pressure: 2.1 bar (30 psi). Jacket Temperature: 176.7 °C (350 °F). Full Vacuum: Yes. Product Density: 2.1 m3 (75 ft3).