Carbon Steel Hammer Pulverizer 11.2 kW (15 HP) For Sale - IPP# 210325

Type: Pulverizer

Subtype: Hammer

Manufacturer: Pennsylvania

Model: SXCAG 104-42

Condition: Used

Material: Carbon Steel

Capacity: 283.2 m3 (10,000 ft3)

Outlet Discharge Diameter: 2,019 mm (79.5 in)

• reversible hammer mill
• Rated for 250 TPH at 900 rpm, designed to crush Coal at 50 PCF.
• 6 rows of hammers (17) hammers each with 2 end hammers per row staggered.\
• With feed and discharge shuts, vibrater on feed side.
• 10,000 Cu Ft based on 1 ton =40 cu ft

Inlet Diameter: 1,880 mm (74 in). Motor Power (Design): 372.9 kW (500 HP). Speed (RPM): 900. Orientation: Horizontal.

Type: Pulverizer

Subtype: Hammer

Manufacturer: Williams

Model: 40GA

Condition: Used

Material: Carbon Steel

Outlet Discharge Diameter: 482.6 mm (19 in)

Inlet Diameter: 381 mm (15 in)

Hammer mill pulverizer with product heater with left hand drive Rated for 1200 rpm with 12 hammers Machine has auto oiler for bearings. With Spinner and blower to move sized product to plant. Weight on hammer mill 14,660 lbs with spinner 22,565 lbs. Product heater is rated 6 mm BTU, CS, North American air dryer powered by natural gas With Blower, Gas train and heater installed on skid. Skid dimensions are 193" long x 61" wide x 74" high. Air inlet is rectangular flange 15" x 11". Air Outlet is round 19" diameter Complete automated fuel train by, with series 2300 turbo blower. Product air heater is also listed under IPP # 221295.

Motor Power (Design): 111.9 kW (150 HP). Speed (RPM): 1,200. Orientation: Vertical.

Type: Pulverizer

Subtype: Hammer

Manufacturer: Williams

Model: 40GA

Condition: Used

Material: Carbon Steel

Outlet Discharge Diameter: 482.6 mm (19 in)

Inlet Diameter: 381 mm (15 in)

Hammer mill pulverizer with product heater with left hand drive Rated for 1200 rpm with 12 hammers Machine has auto oiler for bearings. With Spinner and blower to move sized product to plant. with spinner 22,565 lbs. Product heater is rated 6 mm BTU, CS, North American air dryer powered by natural gas With Blower, Gas train and heater installed on skid Skid dimensions are 193" long x 61" wide x 74" high Air inlet is rectangular flange 15" x 11". Air Outlet is round 19" diameter Complete automated fuel train by, with series 2300 turbo blower. Product air heater is also listed under IPP # 221294.

Motor Power (Design): 111.9 kW (150 HP). Speed (RPM): 1,200. Orientation: Vertical.

Type: Pulverizer

Subtype: Hammer

Manufacturer: Eidal International Sales Corporation

Condition: Used

Material: Carbon Steel

Outlet Discharge Diameter: 558.8 mm (22 in)

Inlet Diameter: 1,346 mm (53 in)

Location: Wilsonville, OR opening on the top, with a round grinding tub, with fixed bed knives and fixed fly knives on the center rotor. Rotor is under driven with a belt to a 100 HP vertical motor. Pulverizing chamber has a fiberglass top cover with a side feed side feed opening 35" X 35" plus bolt section that is 22" X 26". approx weight 15,000 lbs.

Motor Power (Design): 74.6 kW (100 HP). Orientation: Vertical.