Quote Cart
screw feeder with hopper 1.5 HP, 6.63:1 drive reducer, 30:18 pulley ratio, 158 rpm screw speed, belt driven, 360mm wide x 500mm deep x 370mm long trough with lump braker rotor, 4-chopper blades on rotor, driven by 3/4 HP, 3/50/115/230 volt, 1725 rpm motor, 200:1 reducer, 8.6 rpm rotor speed, 304 stainless steel feed hopper, square bottom with round top, 370mm wide x 370mm long x 570mm high, top 600mm diameter, bolt flat top,
Type: Feeder
Subtype: Screw
Condition: Used
Material: Stainless Steel 304
Hopper: Yes
Inlet Size: 300 mm (11.8 in)
driven by 2-speed motor, 0.75 kw, 3/50/380-420/220-240 volt, 1400 rpm or 0.90 kw, 3/60/440-480/250-280 volt, 1690 rpm, hopper chamber also has lump breaker, shaft driven by same motor as the screw, openings top 1-300 mm (feed), 1-200mm (with bursting disc),
Outlet Discharge Diameter: 125 mm (4.9 in). Powered By: Electric. Screw Diameter: 112 mm (4.4 in). Screw Length: 1,900 mm (74.8 in).
Type: Feeder
Subtype: Screw
Manufacturer: Acrison
Model: BDF 4 1-1/2
Condition: Unused
Material: Stainless Steel 304
Powered By: Electric
Screw Diameter: 254 mm (10 in)
twin screw feed with screw conveyor. Feed bin is 48" x 48" with twin screws discharging into a 10" diameter X 8' long screw conveyor. Leason 3/4HP motors and reducers, conveyor driven by approximately 10 HP motor. Designed for feed rates of 0.58 to 3400 cu.ft./hour.Designed for 48" round inlet hopper(not Included), discharge into 14" round opening.
Screw Length: 2,438 mm (96 in).
Type: Feeder
Subtype: Screw
Manufacturer: Schenck
Model: Tuf-Flex volumetric series 600
Condition: Used
Material: Stainless Steel 304
Hopper: Yes
Powered By: Electric
Accurate Dry Feeder Tuf-Flex volumetric series 600 with Vinyl Flex hopper 18" ID x 18" ID x 12" deep with a 48" long 304SS tube Unit has (2) 1/4 HP Pacific Scientific Motors, 1800 RPM, 90 DC volts One moter controls feed rate, second motor for hopper agitation. Mounted on a portable cart with wheels, Power cord and plug. Agitation and Feed rate control boxes mounted under the feeder All electricals are Class I Group D enclosures 28" wide (without screw)
Screw Diameter: 50.8 mm (2 in). Screw Length: 1,219 mm (48 in). Orientation: Horizontal.