Feeders from IPP. Over 14 pieces for sale. Chemical Equipment and Process Equipment buy unused, surplus, second hand or used here.
Highest-ranked available inventory for this selection.
Feeders from IPP. Over 14 pieces for sale. Chemical Equipment and Process Equipment buy unused, surplus, second hand or used here.
Choose a subtype for a more focused set of listings.
Use this setting to include or exclude equipment with this feature.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Use this setting to include or exclude equipment with this feature.
Showing 14 of 14 matching Feeders.
Accurate Dry Feeder
Tuf-Flex volumetric series 600
with Vinyl Flex hopper
18" ID x 18" ID x 12" deep
with a 48" long 304SS tube
Unit has (2) 1/4 HP Pacific Scientific Motors, 1800 RPM, 90 DC volts
One moter controls feed rate, second motor for hopper agitation. Mounted on a portable cart with wheels, Power cord and plug. Agitation and Feed rate control boxes mounted under the feeder
All electricals are Class I Group D enclosures
28" wide (without screw)
volumetric feeder
10 amp. With SS hopper
Mounted on a stand with wheels.
ontrols for Stop & Start filling cycle, fill quanity with precision counter that controls the amount of product dispensed and the batch size.The speed of the auger is regulated by a seperate control.
Twin screw
Feed conveyor for a porcupine processor
Inlet size is 48" x 30"
Triple chain drive sprocket.(No motor or gearbox)
wetted parts,and all Body parts 316 SS
otary air Lock assembly, with hinged side access. 10" diameter straight through design. @" deeep recessed vanes (7) total. With mechanical seal on driven shaft end. Opposite end has hinged acess door for easy cleaning and removal of valve.
16-1 hp, 256-1765 rpm, 213TC frame. Motor drives chain through a Cyclo gear drive. Diameter of valve flange is 16". Flange face to face is 20"
screw feeder with hopper
1.5 HP, 6.63:1 drive reducer, 30:18 pulley ratio, 158 rpm screw speed, belt driven, 360mm wide x 500mm deep x 370mm long trough with lump braker rotor, 4-chopper blades on rotor, driven by 3/4 HP, 3/50/115/230 volt, 1725 rpm motor, 200:1 reducer, 8.6 rpm rotor speed, 304 stainless steel feed hopper, square bottom with round top, 370mm wide x 370mm long x 570mm high, top 600mm diameter, bolt flat top,
skid with SS tank
feed pump and 1/2 " diameter flexible feed hose
open top with 8" cone bottom
with the tank outlet piped inot the intake fo a Grundfos SS pump
13 gpm @ 190 TDH
Pump and tank is mounted on a skid with Speer control box with Start/Stop buttons, fisher Porter Flow control meter, and misc. flexible hose
Feeder to Briquetter Style 4N960.2921
screw feeder with hopper,
design pressure -50 mbarg @ 50 degrees C,
bolt flat top, weld coned bottom
driven by 2-speed motor, 0.75 kw, 3/50/380-420/220-240 volt, 1400 rpm or 0.90 kw, 3/60/440-480/250-280 volt, 1690 rpm, hopper
chamber also has lump breaker, shaft driven by same motor as the screw,
openings top 1-300 mm (feed), 1-200mm (with bursting disc),
with drive motor and gearbox.
rotary feeder valve.
16.17 rpm.
Chain and sprocket driven.
Has packing gland.
Has Dazig speed switch.
twin screw feed with screw conveyor.
Feed bin is 48" x 48" with twin screws discharging into a 10" diameter X 8' long screw conveyor.
Leason 3/4HP motors and reducers, conveyor driven by approximately 10 HP motor. Designed for feed rates of 0.58 to 3400 cu.ft./hour.Designed for 48" round inlet hopper(not Included), discharge into 14" round opening.
Used feeders are essential components in process systems, delivering controlled amounts of bulk materials to downstream equipment such as mixers, mills, extruders or reactors. Whether you’re feeding powders, granules or flakes, feeders help ensure consistency, prevent waste and improve overall process efficiency. With more than 47 years of experience, IPP supplies used, secondhand and surplus feeders from 20 global plant sites and over 15,000 in-stock systems, ready for immediate shipment.
IPP offers volumetric and gravimetric feeders from top brands including Acrison, K-Tron, Schenck and Merrick, with configurations ranging from screw, vibratory and belt feeders to loss-in-weight systems.
Feeders are designed for durability, hygiene and process compatibility:
Learn more about material feeding technologies and best practices from Powder & Bulk Engineering.
Search the IPP inventory or contact IPP’s equipment experts to locate the ideal used, surplus or secondhand feeder for your operation. With reliable performance and fast shipping, IPP helps you save time and money on every material handling challenge.
Have questions about Feeders or our services? Learn more about our products and why customers choose IPP.