Diameter
Measure
Quote Cart
Drum Dryers from IPP. Over 17 pieces for sale. Chemical Equipment and Process Equipment buy unused, surplus, second hand or used here.
Highest-ranked available inventory for this selection.
Drum Dryers from IPP. Over 17 pieces for sale. Chemical Equipment and Process Equipment buy unused, surplus, second hand or used here.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Set a numeric threshold to narrow the matching listings.
Use this setting to include or exclude equipment with this feature.
Use this setting to include or exclude equipment with this feature.
Select one or more values to narrow the current listings.
Showing 17 of 17 matching Drum Dryers.
Chrome plated carbon steel drums with 304 stainless steel, jacketed vacuum housing
Sanitary and polished construction suitable for food and pharmaceuticals but can be used for any batch processes, or converted to a continuous process.
Drum rolls have a 16 micro-inch finish, all internals have a 32 micro-inch finish
External finish is 2B or bead blast
Vacuum housing is rated to operate at full vacuum
Drums are rated for 160psi/FV @ 375 degrees F (NB# 9918 and NB# 9919)
Designed for use in class 1 division 2 atmospheres
1287 lbs./hr. of H2O and Ethanol
utilizing a 3.8 to 4.6 lbs./hr./ft2 evaporation rate
Spring loaded screw type manual adjustment assemblies with digital drum gap display
Pneumatic cylinder adjustable 304 stainless steel knife bars with clamp and acme thumb fasteners and pneumatically operated stainless steel end scrapers
8 zone steam jackets rated for 160 psi at 375 degrees F
(4) 6” tri-clamp top chamber inlets, (4) 4” tri-clamp product feed inlets, (2) 14” 150lb ANSI flange vapor outlets
(14) 1/2” NPT hot water jacket nozzles, (2) 1.5” NPT hot water jacket nozzles, (6) 4” tri-clamp internal drains, (10) 4” tri-clamp light ports
The Vacuum system is rated for 140 CFM, and is 304 SS contact, capable of handling 1,340 lbs./Hr. of vapor rate
Manufactured by Wintek Corp
Model # C380R50-WSS-=140/2-1FRss, serial # 140321
The skid mount system contains the following equipment: One-(1) 380 square foot, 304 SS contact, shell and tube pre condenser
TEMA C AEL, requires 180 GPM of cooling water at 50 degrees F
One-(1) Non code 304 SS 50-gallon receiver, with condensate pump
One-(1) Vacuum pump, SS wetted side, manufactured by Dekker, rated for 140 CFM, direct driven by a WEG 10 HP motor at 1750 rpm
One -(1) separator tank, non-code 304 SS, approximately 10 gallons
One- (1) Sealant heat exchanger, non-code, plate and frame, SS process side, requires 10 GPM cooling water at 50 degrees F
All equipment mounted in a CS frame work with ss interconnecting piping
The control system is a free standing Panel View Plus 1000 in a nitrogen purged enclosure good for Class 1,Division 2, Group D
It is located local to the machine, but will also send a signal to a remote control room
Located outside the classified area are the motor VFD, and electrical controls
chrome plated drum dryer
Single drum dryer
varispeed motor
(4) applicator rolls, manually adjustable
Drum gear driven (no motor).
Openings: drum 1-87mm, 1-19mm
single drum dip feed dryer
M/C #4586
Drum cored for steam heating (2-50mm openings)
Speed 1 to 6 rpm
Drum totally enclosed in 316 stainless steel chamber
Motor:
non-flameproof motor
Drum with monel adjustable stainless steel knife/scrapper
Dip tray 1522mm long x 736mm wide
Openings: 2-50mm, 1-25mm; hood with 1-300mm, 2-100mm. All wetted parts 316 stainless steel. (3) 400mm long x 300mm wide inspection covers.
single drum dryer
Drum driven by 12 KW motor and reducer
Cored drum
Packing gland on shaft
Outboard bearings
Dual knife discharge,
manual knife adjustment
into 8" dia screw conveyor
double drum dryer with chrome plated rolls
.008 to .010 chrome plating on drum surface
75 rockwell hardness
drum Serial #17107
2 1/2" rotary steam joint
Includes SS fume hood
Equipped with a jacketed bath
Sprocket driven
hydraulic adjustable discharge knife
single drum dip feed dryer
Drum cored for steam heating
Manual knife discharge
Has 15" x 19" CS jkt feed pan
3/60/230/460 volt,
rated 44 rpm max, 8.8 rpm min
total face cast iron single drum dryer
drum manufactured by Black Clawson
serial #10062/4130, S.H 51mm, H.D 76mm, H.D.R 2362mm
drum cored for steam heating
(4) cast iron applicator feed rolls
(1) Cast steel knife, gear driven drum
motor missing
Cooper bearings
cast iron drum for dryer
Blt for working pressure of 10 bars
1.5m OD x 3.5m long cast iron dryer/flaker drum
W/end and shaft
Design pressure 147 psi (10 bar),
steam pressure 357 deg F
drum for dryer
Blt for working pressure of 10 bars
cast iron dryer/flaker drum
W/end and shaft
For drum dryer
UNUSED
cast iron dryer/flaker drum
W/end and shaft
cast iron drum for dryer
Blt for working pressure of 10 bars
cast iron dryer/flaker drum
W/end and shaft
For drum dryer
Design pressure 147 psi (10 bar), steam pressure 357 deg F
chrome plated single drum dryer
Has jkt feed pan
Belt driven by US varidrive
Motor: 3 phase
3/60/230/460 volt,
5.4 rpm min
54 rpm max
Has hood
12" x 30" side access panel
Has 8" x 8" discharge w/chute and manual slide design gate valve
cast iron R Simon single drum dryer
Dryer includes (3) + (1) 316SS
9" feed rolls
working pressure 3 bar (6 bar tested)
w/(2) pneumatic and (1) manual operated feed roll scrapers
Scraper knifes mfd form tufnol bear brand material
Pneumatically operated (non-oscillating) cast iron knife bar
Knife mfd in cast steel
Motor:
28 amps
variable speed gearbox
Radicon reduction gearbox
SS paddle conveyor w/inspection panels powered by 1.5 KW geared motor
Unit can be supplied w/pneumatically operated traversing gear if required
Control panel consisting of all pneumatic controls and electrical timers for feed roll scrapers
Was rebuilt
When your operation requires efficient drying of bulk solids, slurries, or pastes, industrial drum dryers deliver consistent, high-volume drying performance across multiple industries. With over 47 years of process equipment expertise, IPP provides immediate access to high-quality used drum dryers sourced from 20 complete plant sites and included in our inventory of over 15,000 ready-to-ship pieces of equipment. Choosing a used drum dryer from IPP helps companies lower project costs, avoid extended lead times, and maintain reliable production operations.
Drum type process dryers, also known as rotary dryers, are workhorses in many industries for efficiently drying a wide range of materials. Here's a breakdown of their uses and construction:
Drying bulk solids: This is their primary function. They excel at reducing the moisture content of materials like:
Drum dryers consist of a large, rotating cylindrical drum. The material to be dried is fed into one end of the drum, while hot air or gas is blown through the drum, either in the same direction as the material flow (co-current) or in the opposite direction (counter-current). As the drum rotates, the material tumbles and comes into contact with the hot Drum, allowing moisture to evaporate. The dried material is then discharged from the other end of the drum.
The choice of materials depends on the specific application and the properties of the material being dried. Common materials include:
If you are looking for a Drum type Process Dryer, search our inventory or contact International Process Plants for more information.
Read more: The market for second-hand process plant and equipment is thriving
Have questions about Drum Dryers or our services? Learn more about our products and why customers choose IPP.
