Compressors from IPP. Over 120 pieces for sale. Chemical Equipment and Process Equipment buy unused, surplus, second hand or used here.
Highest-ranked available inventory for this selection.
Compressors from IPP. Over 120 pieces for sale. Chemical Equipment and Process Equipment buy unused, surplus, second hand or used here.
Choose a subtype for a more focused set of listings.
Select one or more values to narrow the current listings.
Set a numeric threshold to narrow the matching listings.
Showing 25 of 120 matching Compressors.
IP55 motor, water cooled, with integrated air dryer, mounted in an acoustic cabinet,
C 3-stage reciprocating Boil-off-gas (BOG) compressor system
maximum allowed rod. Load 100kN, rated discharge pressure of final stage 69 barg, suction pressure 1st stage 0.05 bar @ 30 degrees C, 2nd stage 4.6 bar @ 45 degrees C, 3rd stage 27.7 bar @ 45 degrees C, discharge pressure 1st stage 4.7 bar @ 176 degrees C, 2nd stage 27.9 bar @ 190 degrees C, 3rd stage 69 bar @ 160 degrees C, driven by a 250kw, 3/50/400 volt, 594 rpm ATEX 1022 EExd II B T4Loher motor, (1) 550 liter stainless steel vertical pulsation dampner vessel, manufactured by Nadoba Stabilini, serial #954, pressure 0.05 bar @ -118/+30 degrees C, 610mm diameter x 1740mm straight side, weld dished top and bottom, (1) 125 liter carbon steel horizontal pulsation dampner, manufactured by Tlakova Nadoba Stabilini, serial #955, pressure 10.7/69.6 bar @ 57/159 degrees C, weld dished ends, (1) carbon steel tube and shell horizontal 1st stage intercooler, manufactured by APL Apparatebau AG, serial #W8227/EC22601, tubeside pressure 10 barg @ -10/200 degrees C (27 liter), shell 10 barg @ -10/200 degrees C (53 liter), (1) carbon steel tube and shell horizontal 2nd stage intercooler, manufactured by APL Apparatebau AG, serial #W8228/EC22602, tubeside pressure 29 barg @ -10/200 degrees C (20 liter), shell 10 barg @ -10/200 degrees C (55 liter), (1) carbon steel tube and shell horizontal 3rd stage intercooler, manufactured by APL Apparatebau AG, serial #W8229/EC22603, tubeside pressure 78 barg @ -10/200 degrees C (9 liter), shell 10 barg @ -10/200 degrees C (42 liter), system also includes interconnecting pipework, valves, etc, ALL CE MARKED
pressure compressor
cooling medium R717
Motor current: 144A
115 to 125 max. psi Rotary Screw Air Compressor Oil Free, packaged design, with microprocessor controls, cooler and lubricator
Wet Gas Compressor
Radial Split case two stage compressor
motor through a Lufin gear reducer
The Datum compressor is an 18 frame size(inside case diameter) with a radial split case, six impellers and a back to back rotor design. The machine features a lube skid that supports the compressor, motor and gear, a gas skid for the double Dry Gas seals, and instrumentation for vibration and temperature detection.
MMSCFD Dry: 49.73; Lbs/Hr Wet: 224,820;
Inlet PSIA: 20.9; Inlet Temp: 106 Degree F; Inlet ACFM Wet: 24,183
Designed for Outdoor Use, Under roof.
All Electricals are Class 1, Group CD, Division 2.
Speeds: Maximum Continuous 5,653 RPM,
Trip Speed 5,719,
CCW rotation from drive end. With one piece shaft.
Motor, Gear reducer, and Compressor skid mounted.
Lufkin Gear reducer, 3.178:1 ratio, rated 10,300 HP.
The Oil control system is by Cobey, and skid mounted.
The Seal gas system and skid are by Flowserve.
Ammonia Compressor
C/T 20571.
Inlet Casing Design Pressure 2500 PSIG, Outlet Casing Design Pressure 2500 PSIG; Outlet casing Design Temperature 450 Degrees F
1sr Critical speed 5300 RPM, Maximum Operating Temperature 380 Degrees F; Test Inlet Pressure 3750 PSIG; Test Discharge Pressure 3750 PSIG. NOTE: Used in train with turbines #206300 & 206301, and Compressor # 206303
high pressure, unitized and skid mountedmultistage air compressor systemoil free designdesign cooling water temperature 25 degrees Ccooling water temperature rise design 14 degrees Ccooling water flow to oil cooler 180 ltr/min
high pressure, unitized and skid mountedmultistage air compressor systemoil free designhigh air temperature to trip setting (interstage) 46 degrees Cdesign cooling water temperature 25 degrees Ccooling water temperature rise design 14 degrees Ccooling water flow to oil cooler 180 ltr/min
Elliot Centrifugal Compressor
Style 2 B1 Frame
Two stage,
oil flooded, rotary,
air compressor
Single stage screw compressor, with all accessories piped, wired and base plate mounted in a packaged design with sound proof housing.
Equipped with IR "Intellisys" digital controls, for operation of the entire system and allowing for modification of 12 variables in the controller logic.
3 inch NPT air discharge line, 2" NPT cooling water inlet and outlet ports, 0.5" NPT condensate drain line.
Total package amps 310
Bare Compressor Only
no Drive
no ex proof
System included (2) separator tanks
(1) separate 4 cm³/U oil pump, type KF1/4 D10K POA ODD1 with 0.56 kW, 220-380, 50 Hz, 1.380 rpm electrical motor
(1) separate control panel
Flow rate: 910 Nm3/hr
100/165 deg C
Hydrogen 3-stage V-type compressor system
aspiration flow 1010 m3/hr
suction pressure stage 1 = 1/1.1 bar @ 20-40 deg C, stage 2 = 3.6 bar @ 140 deg C, stage 3 = 10.76 bar @ 40 deg C, pressure side stage 1 = 3.8 bar @ 165 deg C, stage 2 = 10.8 bar @ 160 deg C, stage 3 = 17 bar @ 100 deg C, ambient temperature -20/+10 deg C, water cooled compressor,
performance 134kw
1500 rpm motor (missing)
system also includes heat exchanger (gas cooler), pulsation dampers, separators, pipework, pressure gauges etc
rotary screw single stage air compressor
With a 120 gallon receiver.
with air cooling
The compressor is belt driven
The skid has analog controls.
650 Nm3/hr
Hydrogen single stage compressor system
mass flow 62.2 kg/hr, suction pressure 16 bar @ 35 – 40 deg C, ambient temperature -20/+40 deg C, water cooled compressor performance 41kw, single stage, 85mm stroke, speed 780 rpm, average piston speed 2.21 m/sec,
V-belt driven by 51kw,
system also includes (1) horizontal heat exchanger (gas cooler), (2) pulsation dampers (1 for suction, 1 for discharge), pipework, pressure gauges etc
Centac II air compressor
Water cooled with both Intercooler & after cooler
Compressor inlet 6" discharge 3"
cooling water inlets and outlests are 2" Skid mounted with control panel and oil pump
2 pole 3 phase constant speed AC drive motor rated for 129 full load amps
With carbon steel air reciever
600 gallon vertical mount
6" inlets and outlets,
1.5" presure releif valve, and 15" eliptical hand way.
Air end compressor head
Part # 1616 6551
GA55 GBD-
part # 2901-0844-00.
Centac Air Compressor
dry hydrogen reciprocating compressor, suction pressure 17 kg/cm2, discharge pressure 35-66 kg/cm2, speed 257 rpm, 400 rpm,
When your operation depends on reliable gas compression for process, storage, or transfer, industrial compressors deliver the performance needed to keep operations moving. With over 47 years of process equipment expertise, IPP provides immediate access to high-quality used compressors sourced from 20 complete plant sites and included in our inventory of over 15,000 ready-to-ship pieces of equipment. Choosing used compressors from IPP helps companies reduce capital costs, shorten procurement timelines, and maintain consistent system reliability.
Industrial compressors are designed to increase the pressure of gases for transportation, storage, or process operations. They are essential for applications across chemical manufacturing, energy production, food and beverage processing, and general industrial services.
Compressors are designed for durability, chemical compatibility, and safe operation under pressure:
Learn more about industrial compressor selection and optimization from Plant Engineering.
Search the IPP inventory or contact IPP’s equipment experts to find a used compressor that fits your plant’s needs. With ready-to-ship inventory, IPP helps companies increase uptime, lower costs, and maintain reliable gas handling operations.
Have questions about Compressors or our services? Learn more about our products and why customers choose IPP.
