Used compressors for sale: air and gas compression systems for industrial utilities

IP55 motor, water cooled, with integrated air dryer, mounted in an acoustic cabinet,

115 to 125 max. psi Rotary Screw Air Compressor Oil Free, packaged design, with microprocessor controls, cooler and lubricator

Ammonia Compressor
C/T 20571.
Inlet Casing Design Pressure 2500 PSIG, Outlet Casing Design Pressure 2500 PSIG; Outlet casing Design Temperature 450 Degrees F
1sr Critical speed 5300 RPM, Maximum Operating Temperature 380 Degrees F; Test Inlet Pressure 3750 PSIG; Test Discharge Pressure 3750 PSIG. NOTE: Used in train with turbines #206300 & 206301, and Compressor # 206303

• CE0038,
• MAWP 9 barg,
• input power 101.6kW,
• 3400 rpm shaft speed,
• built on controls,
• contained in a soundproof cabinet,
• (1) Atlas Copco type MD200 VSD air dryer,

• Air compressor single stage screw compressor, with all accessories piped, wired and base plate mounted in a packaged design with sound proof housing. Equipped with IR "Intellisys" digital controls, for operation of the entire system and allowing for modification of 12 variables in the controller logic. 3 inch NPT air discharge line, 2" NPT cooling water inlet and outlet ports, 0.5" NPT condensate drain line. Total package amps 310

Two stage,
oil flooded, rotary,
air compressor
Single stage screw compressor, with all accessories piped, wired and base plate mounted in a packaged design with sound proof housing.
Equipped with IR "Intellisys" digital controls, for operation of the entire system and allowing for modification of 12 variables in the controller logic.
3 inch NPT air discharge line, 2" NPT cooling water inlet and outlet ports, 0.5" NPT condensate drain line.
Total package amps 310

rotary screw single stage air compressor
With a 120 gallon receiver.
with air cooling
The compressor is belt driven
The skid has analog controls.

• 45kW, 3/50/400 volt, 1480 rpm,
• driven by 45kW, 3/50/400 volt,
• 1480 rpm Motor,
• rotary vane design,
• enclosed in a soundproof cabinet with hinged front door,
• built on controls,

• electrics 45kW, 3/50/400 volt, 1480 rpm,
• driven by 45kW, 3/50/400 volt, 1480 rpm motor,
• rotary vane design,
• enclosed in a soundproof cabinet with hinged front door,
• built on controls,

• max pressure 11 bar,
• electrics 45kW, 3/50/400 volt,
• 1800 rpm,
• driven by 45kW, 3/50/400 volt, 1480 rpm motor,
• rotary vane design,
• enclosed in a soundproof cabinet with hinged front door,
• built on controls,

rotary screw air compressor
IR Intellisys controls
44' wide x 50" deep x 56" high.

Pulsair screw compressor system
HPC Pulsair single rotary screw compressor
air outlet temperature 9 degrees C, useable heat 77,378 Bthu/hr, expelled air temperature 23 degrees C,
(1) 875 liter carbon steel air receiver, manufactured by Cool Technology ltd, design pressure 11 barg @ 100 degrees C, weld dished heads,
(1) Ultrapac air dryer, type ALDO-0191, serial # 9288, 50/60 hz, 230 volt, working pressure 4 bar @ 4 degrees C (min), 16 bar @ 35 degrees C (max), ambient temperature 4 degrees C (min), 40 degrees C (max), pre-filter element MF-07/30, after filter element PE-07/30

rotary screw compressor system
oil flooded, fixed speed design contained in soundproof cabinet, compressor with (1) ingersoll rand "thermal mass" TMS250 cycling refrigerated air dryer, SR # TMS250-503/3862, max allowable pressure 16 bar, refrigerant 5.8kg of R134A electric's 3/50/380-420 volt, min ambient temp 0/143 degrees c, max inlet temp 55 degrees c, (2) ingersoll rand IGRP/IRHE 706 high efficiency pre-filters, (1) domnick hunter CP375 activated carbon tower filter (oil vapor removal > 0.003ppm),

Rotary screw compressor system
oil flodded, variable speed drive, contained in soundproof cabinet, conpressor with: (1) ingersoll rand "thermal mass" TMS250 cycling refrigerated air dryer, SN: TMS250-0503/3863, max allowable pressure 16 bar, refigerant 5.8kg of R134A, electric's 3/50/380-420 volt, min ambient temperature 0-43 degrees c, max inlet temperature 55 degrees c, (2) ingersoll rand IRGP/IRHE 706 high efficiency pre-filters, (1) domnick hunter CP375 activated carbon tower filter (oil vapor removal > 0.003ppm)

oil free air Compressor
packaged design

180 acfm
nitrogen compressor
Rotary screw design, with inlet strainer
with soundproof enclosure
N2 outlet connection 2" NPT,
Inlet strainer connection 2" NPT, drain,
3/4" NPT.

air cooled
oil free
rotary screw compressor
This is a twin shaft screw compressor, positive displacement type
55 psia @ 60 degrees F outlet pressure
The compressor is a type WQ 40-12/55, 1.2 kg/cu M, 20 degrees C, 75 cuM/minute
321 amps
General Electric Energy Saver AC motor
The intake flange is 8" and discharge flange is 6" and both are mounted at the top of the machine, and the instrumentation for monitoring the unit are mounted on the side as a panel. This unit is mounted in complete sound proof enclosure.

low pressure,Oil free air compressor,
total running hrs 8133.
power 20 KW
30/33,5 kW,3/50/60Hz/380V/2900/2950/3000/3540rpm

125 psi
Takes 310 lbs. of R-22.
Fan driven by a 0.1 HP motor.
UL listed.

S20 Rotary Screw compressor
max service pressure 8 bar
Driven by 2-speed motor,
15 kw, 3/50/400/690 volt, 2910 rpm
water cooled, enclosed in soundproof cabinet
with air dryer and c/steel air reciever

• CE0038,
• MAWP 9 barg,
• input power 84.1kW,
• 3400 rpm shaft speed,
• built on controls,
• contained in a soundproof cabinet,
• (1) Atlas Copco type MD200 VSD air dryer,

air cooled
rotary screw compressor
oil free
This is a twin shaft screw compressor
This is a twin shaft
55 psia @ 60 degrees F outlet pressure
The compressor is a type WQ 40-12/55, 1.2 kg/cu M, 20 degrees C, 75 cuM/minute
General Electric Extra Severe Duty AC motor
The intake flange is 8" and discharge flange is 6" and both are mounted at the top of the machine, and the instrumentation for monitoring the unit are mounted on the side as a panel. This unit is mounted in complete sound proof enclosure.

(1) 915 ltr c/steel air receiver, manufactured by Cool Technology ltd, design pressure 11 barg @ 100 deg C, weld dished heads,
(1) Ultrapac air dryer, type ALDO-0191, serial # 9288, 50/60 hz, 220 volt, working pressure 4 bar @ 4 deg C (min), 16 bar @ 35 deg C (max), ambient temperature 4 deg C (min), 40 deg C (max), pre-filter element MF-07/30, after filter element PE-07/30

17.25 kw, 3/60/440/760 volt, 3500 rpm
water cooled
enclosed in soundproof cabinet, with air dryer and air reciever

driven by 250kW, 3/50/690/400 volt, 1489 rpm IP55 motor, air cooled, integrated refrigerant air dryer, type ID 770W, serial #APF143965, 10.7kW, 3/50/380/415 volt, air pressure (max) 14.5 bar (e) @ 55 degrees C, refrigerant pressure 29/26 bar, all inside and acoustic cabinet, built on controls,