Industry-Specific Categories - Used and Surplus Inventory | IPP

Polymer filter continous rotary filtration system1220 SqCm active screen area9500 Cm/Hr capacity, 48000 watt oil/vapor heating capacity, with 2 heater zones. CS construction.RexRoth 11 KW power pack 3/50/500 volt 1460 Rpm. 2900 Kg Filter

plastic 'Utiliser' dry granulator model 20-strand 321 stainless steel rotor with cutting blades motor : 50/60 Hz, 400/380/415 volt, 981/982/1184 rpm , IE2 CE motor aluminium chamber with hinged top inspection cover

diverter valve and screen changer masch #20004017,2- 110 cm2 screens screen dimensions 120mm x 0.5mm x 93mm (+0.5),230-600 kg/hr throughput, heating capacity of the 6-cartirdges is 6 x 1000 watt, Gebhard/HLP type cartridges, hydraulically driven by a Heusinger and Salmon powerpack, powerpack driven by a 11/12.7 kw,3/50/60/380/660/420/720/380/660/480/830 volt,1440/1465/1730/1755 rpm 2-speed motor, local control panel on a davit,

type 20-48T Plastic 'Utiliser' dry granulator Model 20-strand 321 stainless steel rotor with cutting blade Aluminium chamber with hinged top inspection cover driven by 15 kw, 3 phase, 50/60 Hz, 400/380/415/460/660/690 volt, 970/975/1180 rpm

plastic 'Utiliser' dry granulator model 20-strand 321 stainless steel rotor with cutting blades motor : 50/60 Hz, 380/400/415/460/660/690 volt, 970/975/1180 rpm aluminium chamber with hinged top inspection cover

centrifugal dryer, for plastic pellets/granules rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h

• Floor Console Incubator/Orbital Shaker.
• Takes a 6 liter or a 4 liter flask
• 25 up to 525 RPM
• 41 degrees F., to 140 degrees F.

• Two person potent drug isolator-Glove box.

• Polished to a 180 Grit finish
• Modular Chromatography System
• Pump by Lewa Temperature Rating: 104 °F.

• Polished to 180 grit finish, modular chromatography system, manufactured by Cytiva/GE- ATKA system # 6098
• Pump by LEWA Temperature Rating: 104 °F.

• 400 Liter/Hr.(1.7 GPM), 316 SS, polished to 180 grit finish, modular chromatography system, manufactured by Cytiva/GE
• Skid mounted on wheels for mobility. Pressure Rating: 72.5 psi. Temperature Rating: 104 °F.

• Polished to a 180 Grit finish.
• Pump by Lewa- see data sheet. Pressure Rating: 72.5 psi. Temperature Rating: 104 °F.

• 316 SS polished to a 180 grit finish.
• Pump by Lewa Pressure Rating: 87 psi. Temperature Rating: 104 °F.

• 316 SS polished to a 180 grit finish
• Pump by LEWA Pressure Rating: 72.5 psi. Temperature Rating: 104 °F.

• Polished to a 180 Grit
• Pump by Lewa Pressure Rating: 72.5 psi. Temperature Rating: 104 °F.

Pfaudler Thermal fluid (oil) loop system, all mounted inside a cabinet with pressure gauges, system consists of (1) HMD Magnetic drive centrifugal pump, manufactured by HMD Sealless Pumps Ltd, driven by 5.5 kw, 3/50/415 volt, 2900 rpm motor, (1) 60 liter electric heated tank, manufactured by Pfaudler Balfour, serial #500019, design pressure 10 barg @ 20/200 degrees C, electric heater manufactured by Heatex Ltd, serial #991433, 50kw, 3 phase, 415 volt, EEx d 11C T3, (2) stainless steel plate and shell heat exchangers, manufactured by Vahterus Oy, type PSHE-3HH80/1/1-HE-101 & PSHE-3HH60/1/1-HE-100, serial #6532 & #6531, design pressure on both sides 25 bar @ 200 degrees C, (1) 325 liter horizontal header tank, manufactured by Pfaudler-Balfour, serial #500019, design pressure 10 barg @ 20/200 degrees C, (1) 20 liter vertical tank, manufactured by Pfaudler-Balfour, serial #500019, design pressure 10 barg @ 20/200 degrees C, all items insulated

• Automatik USG300/2 cutting system Including 2 cutters, 1 dryer and controls33-60 strands800/1200/1500mm strand guide length, 80-350 m/min draw in speed.230/460 VAutomatik Dryer Model GT400/2 – L0, Machine number 18.021-602, (Blower fan not available). Includes operating spare cutter.

450mm diameter Liquid/Liquid separator system, designed for separating oil and solvents manufactured by Ott AG, with a stainless steel cyclone separator, openings: on the top (1) 35mm, (1), 45mm, (1) 65mm, (1) DN 100, on the side (1) DN50, (1) DN150 with sight glass, with (2) horizontal stainless steel stripper tanks built 1978 manufactured by EDAK, first tank, serial number 2040/1 rated @ 2 bar by 200 degrees C, volume 200 liter, openings: (1) 35mm, (1) 65mm, (2) 100mm, (1) DN 150 with sight glass, second tank, serial number 2040/2 rated @ 2 bar by 200 degrees C, volume 250 liter, openings: (1) 35mm, (1) 65mm, (2) 100mm, (1) DN 200 with sight glass, with (3) Plate heat exchangers manufactured by Ott, first heat exchanger with 18 plates, second heat exchanger with 19 plates, third heat exchanger with 27 plates, with a centrifugal pump manufactured by Fristan, type FP732/155L, serial number 32121533 driven by a 4,6kW electrical motor manufactured by Loher, type EA132S1A-2, serial number 8475071, 3~/50Hz/380V @ 2915rpm. Originally used to seperate Heptane and Oil. All Stainless Steel construction.

stainless steel fluid bed crystallizer used on PET pellets with heated nitrogen total pressure drop, ca.30 mbar, differential pressure ca 2 mbar, design pressure pe=90 mbar product thickness ca.200mm approximate bed with glass inspection hatches 1.6m wide x 3.3m long x 500mm deep with glass inspection hatches Openings include: product inlet 100mm diameter with rotary valve, hot air inlet 700mm diameter, hot air outlet 700mm diameter, product outlet 150mm x 185mm, chamber with hood,

• High Polish

• Mounted on legs with casters.

3" inlet x 3" outlet steam heated hot melt gear pump

The Husky INQ400 PET is a high-output, multi-material injection molding system specifically engineered for producing PET bottle preforms from virgin PET homopolymer, regrind, or barrier-layer materials. The system integrates a 64-cavity rotary turret mold with a robust clamp mechanism, high-capacity plasticizing/injection section, and an operator-friendly control platform.

System Overview

1. Clamp Unit (Mold Station & Turret Assembly)

• Supports the rotary 64-cavity turret mold used for PET preform manufacture.

• Incorporates:

  • Stationary platen
  • Rotary turret assembly directing mold opening/closing and indexing

• Provides precise mold alignment and repeatable movement across each molding cycle.

2. Injection Unit (Plasticizing & Injection Section)

• Designed for PET homopolymer and capable of processing regrind and barrier materials.
• Utilizes a high-efficiency screw for plasticizing resin pellets, delivering consistent melt quality.
• A dedicated injection piston charges melt into the mold during the injection phase.
• A distributor valve automatically directs resin flow depending on the operating stage (plasticizing vs injection), supporting multi-material operation.

3. Control Unit (HMI & System Controls)

• Integrated control system uses an PC-based platform.

• Standard interface includes:

  • 10.4” color flat-panel display
  • Alphanumeric keypad
  • Mouse input
  • Hinge-mount HMI enclosure

• Provides adjustments for process parameters, diagnostics, alarms, recipes, and machine sequencing.

Key Specifications

• Screw feed rate: 60 rpm
• Installed pump horsepower: 200 hp
• Machine heaters: 92 kW
• Mold heaters: 82 kW
• Mold type: 64-cavity rotary turret (PET preform)
• Material capability: PET homopolymer, regrind, barrier materials
• Included option: Dehumidification hood

Unused Hydraulic unit for a 3V Cogiem filter dryer.3.7kw, 200 bar max pressure. 150 liter tank. Complete except Motor.

• 316 stainless steel platform scale
• Mettler-Toledo IND226x terminal, serial #B705633730, EX II 2G Ex ib IIC T4 Gb ATEX