Plastics - Used and Surplus Inventory | IPP

Polymer filter continous rotary filtration system1220 SqCm active screen area9500 Cm/Hr capacity, 48000 watt oil/vapor heating capacity, with 2 heater zones. CS construction.RexRoth 11 KW power pack 3/50/500 volt 1460 Rpm. 2900 Kg Filter

plastic 'Utiliser' dry granulator model 20-strand 321 stainless steel rotor with cutting blades motor : 50/60 Hz, 400/380/415 volt, 981/982/1184 rpm , IE2 CE motor aluminium chamber with hinged top inspection cover

diverter valve and screen changer masch #20004017,2- 110 cm2 screens screen dimensions 120mm x 0.5mm x 93mm (+0.5),230-600 kg/hr throughput, heating capacity of the 6-cartirdges is 6 x 1000 watt, Gebhard/HLP type cartridges, hydraulically driven by a Heusinger and Salmon powerpack, powerpack driven by a 11/12.7 kw,3/50/60/380/660/420/720/380/660/480/830 volt,1440/1465/1730/1755 rpm 2-speed motor, local control panel on a davit,

type 20-48T Plastic 'Utiliser' dry granulator Model 20-strand 321 stainless steel rotor with cutting blade Aluminium chamber with hinged top inspection cover driven by 15 kw, 3 phase, 50/60 Hz, 400/380/415/460/660/690 volt, 970/975/1180 rpm

plastic 'Utiliser' dry granulator model 20-strand 321 stainless steel rotor with cutting blades motor : 50/60 Hz, 380/400/415/460/660/690 volt, 970/975/1180 rpm aluminium chamber with hinged top inspection cover

centrifugal dryer, for plastic pellets/granules rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h

• Automatik USG300/2 cutting system Including 2 cutters, 1 dryer and controls33-60 strands800/1200/1500mm strand guide length, 80-350 m/min draw in speed.230/460 VAutomatik Dryer Model GT400/2 – L0, Machine number 18.021-602, (Blower fan not available). Includes operating spare cutter.

stainless steel fluid bed crystallizer used on PET pellets with heated nitrogen total pressure drop, ca.30 mbar, differential pressure ca 2 mbar, design pressure pe=90 mbar product thickness ca.200mm approximate bed with glass inspection hatches 1.6m wide x 3.3m long x 500mm deep with glass inspection hatches Openings include: product inlet 100mm diameter with rotary valve, hot air inlet 700mm diameter, hot air outlet 700mm diameter, product outlet 150mm x 185mm, chamber with hood,

3" inlet x 3" outlet steam heated hot melt gear pump

The Husky INQ400 PET is a high-output, multi-material injection molding system specifically engineered for producing PET bottle preforms from virgin PET homopolymer, regrind, or barrier-layer materials. The system integrates a 64-cavity rotary turret mold with a robust clamp mechanism, high-capacity plasticizing/injection section, and an operator-friendly control platform.

System Overview

1. Clamp Unit (Mold Station & Turret Assembly)

• Supports the rotary 64-cavity turret mold used for PET preform manufacture.

• Incorporates:

  • Stationary platen
  • Rotary turret assembly directing mold opening/closing and indexing

• Provides precise mold alignment and repeatable movement across each molding cycle.

2. Injection Unit (Plasticizing & Injection Section)

• Designed for PET homopolymer and capable of processing regrind and barrier materials.
• Utilizes a high-efficiency screw for plasticizing resin pellets, delivering consistent melt quality.
• A dedicated injection piston charges melt into the mold during the injection phase.
• A distributor valve automatically directs resin flow depending on the operating stage (plasticizing vs injection), supporting multi-material operation.

3. Control Unit (HMI & System Controls)

• Integrated control system uses an PC-based platform.

• Standard interface includes:

  • 10.4” color flat-panel display
  • Alphanumeric keypad
  • Mouse input
  • Hinge-mount HMI enclosure

• Provides adjustments for process parameters, diagnostics, alarms, recipes, and machine sequencing.

Key Specifications

• Screw feed rate: 60 rpm
• Installed pump horsepower: 200 hp
• Machine heaters: 92 kW
• Mold heaters: 82 kW
• Mold type: 64-cavity rotary turret (PET preform)
• Material capability: PET homopolymer, regrind, barrier materials
• Included option: Dehumidification hood

24" wide, wet cut, waterslide pelletizer Serial # not available Explosion proof controls, belt driven cutter head Pneumatic assist cover

Vibrating fluid bed with enclosed chamber rated pe=60 mbar total pressure drop, ca.30 mbar differential pressure ca 2 mbar design pressure pe=90 mbar @ 200 deg C, 400 deg C product thickness ca.200mm Openings include: product inlet 100mm diameter with rotary valve, hot air inlet 700mm diameter, hot air outlet 700mm diameter, product outlet 150mm x 185mm, chamber with hood

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900. Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.
The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.

50m /h" radius curved screen 149 micron mesh, (1) 30 m3/hr @ 50m head KSB centrifugal pump, type Etachrom-BC, driven by 7.5 kw, 3/50/400/690 volt 2910 rpm motor, (1) 80 GPM stainless steel hot water tank, electric heated 700mm diameter x 700mm straight side,

Continous, plastic pellet heater Approximatly 4" diameter x 12" long chamber, 3/4" diameter jacketed discharge. Electrically heated chamber, with roatary gear pump on discharge.

Type: Underwater strand pelletizer

the vertical design provides space savings and easy access to the cutter head. Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900.Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head.The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kWThis system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900. Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile. The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.

Type: Underwater strand pelletizer cutter the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900. Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile. The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.

plastic 'Utiliser' dry granulator model 20-strand 321 stainless steel rotor with cutting blade aluminium chamber with hinged top inspection cover

10,000 PPH, (max rate) high capacity weight blend system manufactured by Universal Dynamics, Inc. (Una Dyne). This unit consists of the following sub assemblies: Load Cell/weigh hopper, with blend bins. (Material is batch weighed prior to the mixer). The Mixer assembly that insure a consistent product mix. Feed assembly, assures feed is ready for the weight hopper. And a floor mounted dust collector for any dust generated. With controls.

250-500kg/hr Maag hot melt gear pump viscosity at 10/sec 70 to 3000 Pas inlet pressure 10 bar, outlet pressure 250 bar, (4) heating cartridges (1250 Watt, 415 volt), driven by 18.5 kw, 3/50/60/380/420/480 volt, 1457-1465/1740-1765 rpm mounted on a carbon steel frame,

underwater pelletizer die plate heating 12 x 800 Watt = 9600 Watt (400 volt) die plate working temperature 315 degrees C (max) service pressure before die plate 250 bar (max) supply pressure for pneumatic control 3.5 bar supply for pneumatic blade pressure control 5 bar (max) pellet rate 250 kg/hr pellet rate pellet size 2mm x 2mm, water rate 20 m3/hr direct driven by 11 kw, 3/50/400/690 volt

high speed hammer mega mill/Granulator 4 stainless steel hammers front hindged door 450 square inch screen area

pellet size 3.2mm x 3.2mm, 18 m3/hr water rate (max), 3-rotor screens top side mounted 0.61 m3/second blower, driven by 0.66 kw, 2850 rpm motor, agglomarator catcher, 5-sets of 4 spray nozzles, belt driven by 5.5 kw, 3/50/60/400/690 volt, 1455/1755 rpm motor,

screen granulator non-flameproof motor Missing 4 1/2" diameter x 8" long sieve and rotor.