Height
Measure
Quote Cart
Buy your unused & surplus, second hand / used Major Items Plastics from IPP. Choose from 34 models in stock now for immediate delivery.
Highest-ranked available inventory for this selection.
Buy your unused & surplus, second hand / used Major Items Plastics from IPP. Choose from 34 models in stock now for immediate delivery.
Enter a keyword to match this specification.
Enter a keyword to match this specification.
Enter a keyword to match this specification.
Showing 25 of 34 matching Major Items Plastics.
Polymer filter continous rotary filtration system1220 SqCm active screen area9500 Cm/Hr capacity, 48000 watt oil/vapor heating capacity, with 2 heater zones. CS construction.RexRoth 11 KW power pack 3/50/500 volt 1460 Rpm. 2900 Kg Filter
diverter valve and screen changer masch #20004017,2- 110 cm2 screens screen dimensions 120mm x 0.5mm x 93mm (+0.5),230-600 kg/hr throughput, heating capacity of the 6-cartirdges is 6 x 1000 watt, Gebhard/HLP type cartridges, hydraulically driven by a Heusinger and Salmon powerpack, powerpack driven by a 11/12.7 kw,3/50/60/380/660/420/720/380/660/480/830 volt,1440/1465/1730/1755 rpm 2-speed motor, local control panel on a davit,
centrifugal dryer, for plastic pellets/granules
rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h
24" wide,
wet cut,
waterslide pelletizer
Serial # not available
Explosion proof controls,
belt driven cutter head
Pneumatic assist cover
Type: Underwater strand pelletizer
the vertical design provides space savings and easy access to the cutter head
Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900.
Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head
The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.
The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW.
This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.
50m /h"
radius curved screen
149 micron mesh,
(1) 30 m3/hr @ 50m head KSB centrifugal pump, type Etachrom-BC, driven by 7.5 kw, 3/50/400/690 volt 2910 rpm motor,
(1) 80 GPM stainless steel hot water tank, electric heated 700mm diameter x 700mm straight side,
Continous, plastic pellet heater
Approximatly 4" diameter x 12" long chamber,
3/4" diameter jacketed discharge.
Electrically heated chamber,
with roatary gear pump on discharge.
3" inlet x 3" outlet
steam heated
hot melt gear pump
Type: Underwater strand pelletizer
the vertical design provides space savings and easy access to the cutter head. Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900.Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head.The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kWThis system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.
Type: Underwater strand pelletizer
the vertical design provides space savings and easy access to the cutter head
Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900.
Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head.
The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.
The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW.
This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.
Type: Underwater strand pelletizer cutter
the vertical design provides space savings and easy access to the cutter head
Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900.
Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.
The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW.
This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.
250-500kg/hr
Maag hot melt gear pump
viscosity at 10/sec 70 to 3000 Pas
inlet pressure 10 bar, outlet pressure 250 bar,
(4) heating cartridges (1250 Watt, 415 volt),
driven by 18.5 kw, 3/50/60/380/420/480 volt, 1457-1465/1740-1765 rpm
mounted on a carbon steel frame,
pellet size 3.2mm x 3.2mm, 18 m3/hr water rate (max),
3-rotor screens
top side mounted 0.61 m3/second blower, driven by 0.66 kw, 2850 rpm motor,
agglomarator catcher, 5-sets of 4 spray nozzles,
belt driven by 5.5 kw, 3/50/60/400/690 volt, 1455/1755 rpm motor,
ET Pellet line including Polymer filtration, through cutting, with quench system. Major items include:
(2) 0.38m² / 25 liter 316 SSTi Auto Back Flushing filter,
(2) Gneuss Model RSF250 ZP Polymer filter, continous rotary filtration system,
(2) 4.0 t/h, s/steel (1.4571) BARMAG tooth wheel pumps,
(3) Rieter (Automatik), USG 600 H, PET pellet mill with Rieter Die Head,
(1) 29.88 m³/h 32.5m head @ 1465rpm stainless steel (1.4408) centrifugal pump,
(1) 35 m³/h 30m head @ 1450rpm stainless steel (1.4408) centrifugal pump,
(1) 35 m³/h 30m head @ 1450rpm cast steel (GGG40.3) centrifugal pump,
(2) 4.5m³/h 25m head @ 2900rpm stainless cast steel (1.4581) magnetic (14Nm) centrifugal pumps,
(2) 2664m³/h carbon steel exhaust fans,
(1) 1500 liter/min stainless steel water tank system with stainless steel ribbon,
(4) approx 70 liter stainless steel hopper with a stainless steel sieve insert, stainless steel top cover, welded cone bottom, mounted on a stainless steel saddle,
(1) pallet with a electrical rope winch.
centrifugal dryer
rotor speed 780 rpm
dryer used for plastic pellets/granules.
6500 Kg/hr product throughput.
50 m3/hr water rate
approx 2550 nm3/hr
centrifugal dryer
for plastic pellets/granules
rated 6500 Kg/H product throughput
50 CuM/H water rate
approx 2,550 NM3/h
1440 u/m
centrifugal dryer
for plastic pellets/granules
rated 6500 Kg/H product throughput
50 CuM/H water rate
approx 2,550 NM3/h
1440 u/m
centrifugal dryer, for plastic pellets/granules
rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h
1440 u/m
centrifugal dryer, for plastic pellets/granules
rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h
1440 u/m
centrifugal dryer, for plastic pellets/granules
rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h
1440 u/m
centrifugal dryer, for plastic pellets/granules
rated 6500 Kg/H product throughput
50 CuM/H water rate
approx 2,550 NM3/h
1440 u/m
24" wide,
wet cut,
waterslide pelletizer.
Explosion proof controls,
belt driven cutter head
Pneumatic assist cover
centrifugal dryer, for plastic pellets/granules
rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h
1440 u/m
Polymer filter
continous rotary filtration system
Rated 1220 SqCm active screen area,
9500 Cm/Hr capacity, 48000 watt oil/vapor heating capacity, with 2 heater zones.
CS construction
a RexRoth 11 KW power pack 3/50/500 volt 1460 Rpm
2900 Kg Filter
Used plastic processing equipment from IPP encompasses a wide range of machinery essential for the plastics industry. From injection molding machines and extruders to granulators and recycling systems, IPP offers equipment that meets the demands of various plastic manufacturing processes. With over 47 years of industry experience, IPP supplies used, surplus, and secondhand plastic processing equipment from 20 global plant sites and maintains a ready-to-ship inventory of 15,000+ process systems.
IPP stocks equipment from leading manufacturers such as KraussMaffei, Engel, Davis-Standard, and Conair, ensuring quality and reliability.
To ensure durability and compliance, plastic processing equipment is typically constructed from:
Discover how used plastic processing equipment can enhance your manufacturing efficiency at PlastiWin Capital Equipment.
Browse IPP inventory or contact IPP’s plastic equipment specialists to find the right used, surplus, or secondhand machinery for your operations. From individual machines to complete lines, IPP helps you achieve your production goals efficiently and cost-effectively.
As highlighted by EPCA, IPP is recognized as a global buyer and seller of process plants and equipment, serving industries including plastics, with a vast inventory and international presence.
Have questions about Plastics or our services? Learn more about our products and why customers choose IPP.
